Create Tool:uTorrent/3000
Create Time:2011-10-23 13:52:36
File Size:1657.47 MB
File Count:1077
File Hash:0156f7f6a9a7ca1e40ef323b6f9416469df821ab
| UNIT_29/Unit_29_23_Service Technician Calls.mp3 |
| UNIT_03/Unit_03_22_Plotting the Refrigerant Cycle.mp3 |
| UNIT_43/Unit_43_37_Service Technician Calls.mp3 |
| UNIT_41/Unit_41_16_Service Technician Calls.mp3 |
| UNIT_27/Unit_27_05_Making Cube Ice.mp3 |
| UNIT_50/Unit_50_21_Service Technician Calls.mp3 |
| UNIT_32/Unit_32_11_Gun-Type Oil Burners.mp3 |
| UNIT_33/Unit_33_08_High-Temperature Hydronic Piping Systems.mp3 |
| UNIT_45/Unit_45_34_Service Technician Calls.mp3 |
| UNIT_27/Unit_27_04_Making Flake Ice.mp3 |
| UNIT_23/Unit_23_09_New Technology in Compressors.mp3 |
| UNIT_16/Unit_16_07_Direct Digital Controls (DDCs).mp3 |
| UNIT_09/Unit_09_13_Popular Refrigerants and Their Compatible Oils.mp3 |
| UNIT_22/Unit_22_20_Head Pressure Control.mp3 |
| UNIT_27/Unit_27_08_Water and Ice Quality.mp3 |
| UNIT_33/Unit_33_07_Other Hydronic System Components.mp3 |
| UNIT_34/Unit_34_06_Common Pollutants.mp3 |
| UNIT_35/Unit_35_15_Fresh Air, Infiltration, and Ventilation.mp3 |
| UNIT_32/Unit_32_19_Combustion Efficiency.mp3 |
| UNIT_31/Unit_31_33_Service Technician Calls.mp3 |
| UNIT_47/Unit_47_11_Service Technician Calls.mp3 |
| UNIT_28/Unit_29_05_Truck Refrigeration Systems.mp3 |
| UNIT_43/Unit_43_24_Controls for the Air-To-Air Heat Pump.mp3 |
| UNIT_23/Unit_23_05_Reciprocating Compressor Components.mp3 |
| UNIT_31/Unit_31_24_Electronic Ignition Modules and Integrated Furnace Controllers.mp3 |
| UNIT_15/Unit_15_09_Electrically Troubleshooting Switches and Loads.mp3 |
| UNIT_30/Unit_30_18_Service Technician Calls.mp3 |
| UNIT_47/Unit_47_10_Maintaining and Servicing Room Units.mp3 |
| UNIT_03/Unit_03_13_Refrigeration System and Components.mp3 |
| UNIT_12/Unit_12_26_Semiconductors.mp3 |
| UNIT_46/Unit_46_17_Service Technician Calls.mp3 |
| UNIT_26/Unit_26_08_Parallel Compressor Systems.mp3 |
| UNIT_44/Unit_44_14_Service Technician Calls.mp3 |
| UNIT_49/Unit_49_15_Water Pumps.mp3 |
| UNIT_10/Unit_10_10_Charging Near-Azeotropic (Zeotropic) Refrigerant Blends.mp3 |
| UNIT_03/Unit_03_07_Temperature and Pressure Relationship.mp3 |
| UNIT_25/Unit_26_24_Oil Pressure Safety Control.mp3 |
| UNIT_09/Unit_09_18_Methods of Recovery.mp3 |
| UNIT_27/Unit_27_06_Microprocessors.mp3 |
| UNIT_43/Unit_43_25_The Defrost Cycle.mp3 |
| UNIT_50/Unit_50_13_Water-Cooled Chiller Maintenance.mp3 |
| UNIT_32/Unit_32_18_Service Procedures.mp3 |
| UNIT_09/Unit_09_19_Mechanical Recovery Systems.mp3 |
| UNIT_05/Unit_05_07_Refrigerant Leak Detectors.mp3 |
| UNIT_33/Unit_33_09_Radiant, Low-Temperature Hydronic Piping Systems.mp3 |
| UNIT_31/Unit_31_12_Automatic Combination Gas Valve.mp3 |
| UNIT_31/Unit_31_27_Venting.mp3 |
| UNIT_31/Unit_31_23_High-Efficiency Gas Furnaces.mp3 |
| UNIT_10/Unit_10_08_Using Charging Charts.mp3 |
| UNIT_29/Unit_29_22_Compressor Running Test in the System.mp3 |
| UNIT_16/Unit_16_06_Control Components.mp3 |
| UNIT_31/Unit_31_32_Combustion Efficiency.mp3 |
| UNIT_31/Unit_31_15_Burners.mp3 |
| UNIT_14/Unit_14_05_Space Temperature Controls, Low Voltage.mp3 |
| UNIT_37/Unit_37_36_Residential Duct System Problems.mp3 |
| UNIT_26/Unit_26_28_Vending Machine Refrigeration.mp3 |
| UNIT_07/Unit_07_10_Heat Sources for Soldering and Brazing.mp3 |
| UNIT_33/Unit_33_05_The Basic Hydronic System.mp3 |
| UNIT_32/Unit_32_20_Service Technician Calls.mp3 |
| UNIT_12/Unit_12_22_Electrical Measuring Instruments.mp3 |
| UNIT_15/Unit_15_11_Service Technician Calls.mp3 |
| UNIT_21/Unit_21_10_Types of Evaporators.mp3 |
| UNIT_41/Unit_41_11_Charging Procedures in the Field.mp3 |
| UNIT_17/Unit_17_25_Variable Speed Motors.mp3 |
| UNIT_41/Unit_41_14_Compressor Electrical Checkup.mp3 |
| UNIT_34/Unit_34_11_Air Humidification.mp3 |
| UNIT_31/Unit_31_20_Safety Devices at the Standing Pilot.mp3 |
| UNIT_27/Unit_27_11_Service Technician Calls.mp3 |
| UNIT_09/Unit_09_17_Recover, Recycle, or Reclaim.mp3 |
| UNIT_02/Unit_02_07_Gas Laws.mp3 |
| UNIT_18/Unit_18_04_The Power Supply.mp3 |
| UNIT_31/Unit_31_34_Summary.mp3 |
| UNIT_48/Unit_48_09_Centrifugal Compressor Chillers (High Pressure).mp3 |
| UNIT_08/Unit_08_10_Measuring the Vacuum.mp3 |
| UNIT_22/Unit_22_17_Air-Cooled Condensers.mp3 |
| UNIT_20/Unit_20_17_Service Technician Calls.mp3 |
| UNIT_09/Unit_09_20_Recovering Refrigerant from Small Appliances.mp3 |
| UNIT_44/Unit_44_13_Waterless, Earth-Coupled, Closed-Loop Geothermal Heat Pump Systems.mp3 |
| UNIT_34/Unit_34_09_Air Cleaning.mp3 |
| UNIT_38/Unit_38_13_Installing Refrigerant Piping.mp3 |
| UNIT_32/Unit_32_05_Fuel Oils.mp3 |
| UNIT_04/Unit_04_03_Electrical Hazards.mp3 |
| UNIT_33/Unit_33_12_Service Technician Calls.mp3 |
| UNIT_28/Unit_29_10_Marine Refrigeration.mp3 |
| UNIT_37/Unit_37_34_The Air Friction Chart.mp3 |
| UNIT_48/Unit_48_28_Absorption Air-Conditioning Chillers.mp3 |
| UNIT_11/Unit_11_04_Temperature-Measuring Instruments.mp3 |
| UNIT_27/Unit_27_12_Summary.mp3 |
| UNIT_48/Unit_48_12_Flooded Evaporator Chillers.mp3 |
| UNIT_47/Unit_47_07_Installation.mp3 |
| UNIT_14/Unit_14_25_Service Technician Calls.mp3 |
| UNIT_14/Unit_14_11_Pressure-Sensing Devices.mp3 |
| UNIT_48/Unit_48_24_Compressors.mp3 |
| UNIT_31/Unit_31_05_Gas Fuels.mp3 |
| UNIT_32/Unit_32_07_Fuel Oil Supply Systems.mp3 |
| UNIT_41/Unit_41_10_Temperature Readings.mp3 |
| UNIT_31/Unit_31_16_Heat Exchangers.mp3 |
| UNIT_43/Unit_43_05_The Four-Way Reversing Valve.mp3 |
| UNIT_04/Unit_04_02_Pressure Vessels and Piping.mp3 |
| UNIT_31/Unit_31_22_Flame Rectification.mp3 |
| UNIT_25/Unit_26_41_Suction-Line Accumulators.mp3 |
| UNIT_25/Unit_26_21_Automatic Pumpdown Systems.mp3 |
| UNIT_40/Unit_40_11_Metering Devices for High-Efficiency Equipment.mp3 |
| UNIT_43/Unit_43_36_Heat Pump Systems with Variable-Speed Motors.mp3 |
| UNIT_31/Unit_31_21_Ignition Systems.mp3 |
| UNIT_07/Unit_07_13_Practical Soldering and Brazing Tips.mp3 |
| UNIT_11/Unit_11_05_Pressure Test Instruments.mp3 |
| UNIT_31/Unit_31_06_Gas Combustion.mp3 |
| UNIT_33/Unit_33_04_The Heat Source.mp3 |
| UNIT_15/Unit_15_05_Troubleshooting a Complex Circuit.mp3 |
| UNIT_23/Unit_23_03_The Function of the Compressor.mp3 |
| UNIT_50/Unit_50_07_Valves for Large Systems.mp3 |
| UNIT_18/Unit_18_09_Motor Drives.mp3 |
| UNIT_45/Unit_45_12_The Domestic Refrigerated Box.mp3 |
| UNIT_23/Unit_23_04_Types of Compressors.mp3 |
| UNIT_31/Unit_31_28_Gas Piping.mp3 |
| UNIT_15/Unit_15_06_Troubleshooting the Thermostat.mp3 |
| UNIT_27/Unit_27_10_Troubleshooting Ice Makers.mp3 |
| UNIT_10/Unit_10_05_Liquid Refrigerant Charging.mp3 |
| UNIT_16/Unit_16_08_Residential Electonic Controls.mp3 |
| UNIT_38/Unit_38_10_Installing the Refrigeration System.mp3 |
| UNIT_23/Unit_23_11_System Maintenance and Compressor Efficiency.mp3 |
| UNIT_26/Unit_26_07_Multiple Evaporators and Single-Compressor Applications.mp3 |
| UNIT_43/Unit_43_29_Troubleshooting the Electrical System.mp3 |
| UNIT_25/Unit_26_36_Filter Driers.mp3 |
| UNIT_24/Unit_24_27_Algorithms and PID Controllers.mp3 |
| UNIT_13/Unit_13_05_Control by Fluid Expansion.mp3 |
| UNIT_33/Unit_33_11_Tankless Domestic Hot Water Heaters.mp3 |
| UNIT_45/Unit_45_24_Low Refrigerant Charge.mp3 |
| UNIT_49/Unit_49_04_Types of Cooling Towers.mp3 |
| UNIT_37/Unit_37_32_Sizing Duct for Moving Air.mp3 |
| UNIT_48/Unit_48_06_Cylinder Unloading and Variable-Frequency Drives.mp3 |
| UNIT_08/Unit_08_22_Cleaning a Dirty System.mp3 |
| UNIT_24/Unit_24_08_Needle and Seat.mp3 |
| UNIT_44/Unit_44_12_Troubleshooting.mp3 |
| UNIT_22/Unit_22_25_Service Technician Calls.mp3 |
| UNIT_44/Unit_44_10_Geothermal Wells and Water Sources.mp3 |
| UNIT_32/Unit_32_06_Oil Storage.mp3 |
| UNIT_17/Unit_17_28_Electronically Commutated Motors.mp3 |
| UNIT_50/Unit_50_03_Chiller Start-Up.mp3 |
| UNIT_01/Unit_01_03_Temperature.mp3 |
| UNIT_09/Unit_09_15_Oil Groups.mp3 |
| UNIT_10/Unit_10_09_Subcooling Method of Charging for TXV Systems.mp3 |
| UNIT_03/Unit_03_11_The Condenser.mp3 |
| UNIT_38/Unit_38_14_Equipment Start-Up.mp3 |
| UNIT_08/Unit_08_06_Leak Detection Tips.mp3 |
| UNIT_21/Unit_21_11_Evaporator Evaluation.mp3 |
| UNIT_09/Unit_09_12_Refrigerant Blends.mp3 |
| UNIT_43/Unit_43_18_Coefficient of Performance.mp3 |
| UNIT_50/Unit_50_08_Centrifugal Chiller Start-Up.mp3 |
| UNIT_03/Unit_03_10_The Compressor.mp3 |
| UNIT_21/Unit_21_20_Defrost of Accumulated Moisture.mp3 |
| UNIT_06/Unit_06_05_Threaded Fasteners.mp3 |
| UNIT_31/Unit_31_31_Troubleshooting Spark Ignition and Intermittent Pilot Systems.mp3 |
| UNIT_14/Unit_14_06_Space Temperature Controls, High (Line) Voltage.mp3 |
| UNIT_01/Unit_01_04_Introduction to Heat.mp3 |
| UNIT_03/Unit_03_09_The Evaporator.mp3 |
| UNIT_44/Unit_44_11_Water-To-Water Heat Pumps.mp3 |
| UNIT_34/Unit_34_08_Ventilation.mp3 |
| UNIT_47/Unit_47_05_The Refrigeration Cycle, Cooling.mp3 |
| UNIT_25/Unit_26_32_Defrost Termination and Fan Delay Control.mp3 |
| UNIT_10/Unit_10_04_Vapor Refrigerant Charging.mp3 |
| UNIT_45/Unit_45_30_Compressor Changeout.mp3 |
| UNIT_14/Unit_14_07_Sensing the Temperature of Solids.mp3 |
| UNIT_50/Unit_50_12_Air-Cooled Chiller Maintenance.mp3 |
| UNIT_28/Unit_29_08_Cascade Systems.mp3 |
| UNIT_14/Unit_14_15_Oil Pressure Safety Controls.mp3 |
| UNIT_29/Unit_29_06_Troubleshooting Low-Temperature Applications.mp3 |
| UNIT_08/Unit_08_08_Purpose of System Evacuation.mp3 |
| UNIT_25/Unit_25_06_Evaporator Pressure Control.mp3 |
| UNIT_12/Unit_12_25_Circuit Protection Devices.mp3 |
| UNIT_08/Unit_08_17_General Evacuation Procedures.mp3 |
| UNIT_03/Unit_03_14_Refrigerants.mp3 |
| UNIT_26/Unit_26_31_Summary.mp3 |
| UNIT_32/Unit_32_16_Heat Exchanger.mp3 |
| UNIT_28/Unit_29_12_Summary.mp3 |
| UNIT_37/Unit_37_26_Zoning with a Single-Speed Blower Motor.mp3 |
| UNIT_13/Unit_13_03_Devices that Respond to Thermal Change.mp3 |
| UNIT_43/Unit_43_27_Auxiliary Heat.mp3 |
| UNIT_50/Unit_50_05_Reciprocating Chiller Start-Up.mp3 |
| UNIT_29/Unit_29_17_Refrigerant Flow Restrictions.mp3 |
| UNIT_22/Unit_22_11_Refrigerant-to-Water Temperature Relationship for Wastewater Systems.mp3 |
| UNIT_45/Unit_45_33_Compressor Capacity Check.mp3 |
| UNIT_38/Unit_38_12_The Split-System Condensing Unit.mp3 |
| UNIT_43/Unit_43_31_Troubleshooting the Four-Way Valve.mp3 |
| UNIT_29/Unit_29_16_Inefficient Condenser.mp3 |
| UNIT_31/Unit_31_26_Modulating Gas Furnaces.mp3 |
| UNIT_11/Unit_11_06_Electrical Test Instruments.mp3 |
| UNIT_26/Unit_26_09_Secondary-Fluid Refrigeration Systems.mp3 |
| UNIT_43/Unit_43_38_Summary.mp3 |
| UNIT_24/Unit_24_26_Step-Motor Expansion Valves.mp3 |
| UNIT_24/Unit_24_32_Operating Charge for the Capillary Tube System.mp3 |
| UNIT_31/Unit_31_04_Types of Furnaces.mp3 |
| UNIT_42/Unit_42_06_Insulation for Existing Ductwork.mp3 |
| UNIT_44/Unit_44_08_Ground-Loop Configurations and Flows.mp3 |
| UNIT_48/Unit_48_02_Safety Checklist.mp3 |
| UNIT_06/Unit_06_07_Other Fasteners.mp3 |
| UNIT_17/Unit_17_19_The Potential Relay.mp3 |
| UNIT_37/Unit_37_09_Types of Fans.mp3 |
| UNIT_04/Unit_04_08_Refrigerants in Your Breathing Space.mp3 |
| UNIT_48/Unit_48_22_Electronic Expansion Valve.mp3 |
| UNIT_37/Unit_37_25_Zoning.mp3 |
| UNIT_15/Unit_15_03_Introduction to Troubleshooting.mp3 |
| UNIT_32/Unit_32_12_Oil Furnace Wiring Diagrams.mp3 |
| UNIT_30/Unit_30_15_Fan Motor Circuits.mp3 |
| UNIT_32/Unit_32_10_By-Products of Combustion.mp3 |
| UNIT_01/Unit_01_09_Latent Heat.mp3 |
| UNIT_39/Unit_39_07_Economics of Equipment Design.mp3 |
| UNIT_08/Unit_08_16_Removing Moisture with a Vacuum.mp3 |
| UNIT_46/Unit_46_14_Servicing the Freezer.mp3 |
| UNIT_18/Unit_18_07_Types of Bearings.mp3 |
| UNIT_15/Unit_15_10_Pictorial and Line Diagrams.mp3 |
| UNIT_44/Unit_44_09_System Materials and Heat Exchange Fluids.mp3 |
| UNIT_44/Unit_44_06_Water Quality.mp3 |
| UNIT_38/Unit_38_09_Electrical Installation.mp3 |
| UNIT_38/Unit_38_11_Installing Split-System Air Conditioners.mp3 |
| UNIT_39/Unit_39_11_Safety Controls for Modern Equipment.mp3 |
| UNIT_07/Unit_07_18_Joining Steel Pipe.mp3 |
| UNIT_03/Unit_03_06_The Refrigeration Process.mp3 |
| UNIT_25/Unit_26_48_Oil Separators.mp3 |
| UNIT_42/Unit_42_07_Evaluation of an Existing Duct System.mp3 |
| UNIT_28/Unit_29_09_Quick Freezing Methods.mp3 |
| UNIT_16/Unit_16_03_Types of Control Systems.mp3 |
| UNIT_09/Unit_09_05_Global Warming.mp3 |
| UNIT_12/Unit_12_15_Characteristics of Parallel Circuits.mp3 |
| UNIT_29/Unit_29_13_Low Refrigerant Charge.mp3 |
| UNIT_37/Unit_37_37_Commercial Duct Systems.mp3 |
| UNIT_25/Unit_25_20_Low-Pressure Control Applied as a Thermostat.mp3 |
| UNIT_48/Unit_48_40_Wye Delta.mp3 |
| UNIT_22/Unit_22_19_The Condenser and Low Ambient Conditions.mp3 |
| UNIT_30/Unit_30_17_Airflow in Electric Furnaces.mp3 |
| UNIT_12/Unit_12_24_Wire Sizes.mp3 |
| UNIT_50/Unit_50_15_Absorption Chiller Operation and Maintenance.mp3 |
| UNIT_46/Unit_46_15_Moving the Freezer.mp3 |
| UNIT_17/Unit_17_30_Summary.mp3 |
| UNIT_44/Unit_44_05_Open-Loop Systems.mp3 |
| UNIT_03/Unit_03_12_The Refrigerant Metering Device.mp3 |
| UNIT_11/Unit_11_07_Refrigerant Leak Detection Devices.mp3 |
| UNIT_26/Unit_26_30_Refrigerated Air Driers.mp3 |
| UNIT_46/Unit_46_03_The Domestic Freezer.mp3 |
| UNIT_25/Unit_26_22_High-Pressure Control.mp3 |
| UNIT_43/Unit_43_22_The Outdoor Unit Installation.mp3 |
| UNIT_24/Unit_24_31_The Capillary Tube Metering Device.mp3 |
| UNIT_28/Unit_29_07_Extra-Low-Temperature Refrigeration.mp3 |
| UNIT_09/Unit_09_04_Ozone Depletion.mp3 |
| UNIT_17/Unit_17_05_Determining a Motor's Speed.mp3 |
| UNIT_48/Unit_48_43_Load-Limiting Devices.mp3 |
| UNIT_41/Unit_41_12_Electrical Troubleshooting.mp3 |
| UNIT_48/Unit_48_15_Condenser Subcooling.mp3 |
| UNIT_29/Unit_29_04_Troubleshooting High-Temperature Applications.mp3 |
| UNIT_37/Unit_37_18_Galvanized-Steel Duct.mp3 |
| UNIT_33/Unit_33_06_The Point of No Pressure Change.mp3 |
| UNIT_36/Unit_36_27_Installation Procedures.mp3 |
| UNIT_29/Unit_29_03_Organized Troubleshooting.mp3 |
| UNIT_08/Unit_08_04_Standing Pressure Test.mp3 |
| UNIT_45/Unit_45_23_Gage Connections.mp3 |
| UNIT_25/Unit_25_17_The Solenoid Valve.mp3 |
| UNIT_08/Unit_08_05_Leak Detection Methods.mp3 |
| UNIT_45/Unit_45_07_The Compressor.mp3 |
| UNIT_40/Unit_40_08_Grades of Equipment.mp3 |
| UNIT_17/Unit_17_17_Three-Phase Motors.mp3 |
| UNIT_09/Unit_09_23_Summary.mp3 |
| UNIT_37/Unit_37_33_Measuring Air Movement for Balancing.mp3 |
| UNIT_37/Unit_37_27_Zoning with a Multispeed Compressor and Variable-Speed Blower.mp3 |
| UNIT_10/Unit_10_07_Using Charging Devices.mp3 |
| UNIT_16/Unit_16_05_Cleaning and Drying Control Air.mp3 |
| UNIT_20/Unit_20_12_Single-Phase Motor Starting Problems.mp3 |
| UNIT_46/Unit_46_05_Cabinet Interior.mp3 |
| UNIT_41/Unit_41_17_Summary.mp3 |
| UNIT_14/Unit_14_04_Temperature Controls.mp3 |
| UNIT_07/Unit_07_11_Soldering Techniques.mp3 |
| UNIT_20/Unit_20_10_Shorted Motor Windings.mp3 |
| UNIT_01/Unit_01_13_Atmospheric Pressure.mp3 |
| UNIT_31/Unit_31_17_Fan Switch.mp3 |
| UNIT_29/Unit_29_15_Inefficient Evaporator.mp3 |
| UNIT_17/Unit_17_08_Electrical Power Supplies.mp3 |
| UNIT_35/Unit_35_10_Dry-Bulb and Wet-Bulb Temperatures.mp3 |
| UNIT_44/Unit_44_07_Closed-Loop Systems.mp3 |
| UNIT_25/Unit_26_51_Crankcase Heat.mp3 |
| UNIT_43/Unit_43_34_Special Applications for Heat Pumps.mp3 |
| UNIT_32/Unit_32_14_Cad Cell Safety Control.mp3 |
| UNIT_07/Unit_07_08_Bending Tubing.mp3 |
| UNIT_05/Unit_05_06_Specialized Service and Installation Equipment.mp3 |
| UNIT_23/Unit_23_06_Belt-Drive Mechanism Characteristics.mp3 |
| UNIT_24/Unit_24_16_Functioning Example of a TXV with Internal Equalizer.mp3 |
| UNIT_18/Unit_18_08_Motor Mounting Characteristics.mp3 |
| UNIT_08/Unit_08_23_Summary.mp3 |
| UNIT_43/Unit_43_35_Heat Pumps Using Scroll Compressors.mp3 |
| UNIT_02/Unit_02_06_Specific Volume.mp3 |
| UNIT_29/Unit_29_14_Refrigerant Overcharge.mp3 |
| UNIT_31/Unit_31_29_Gas Furnace Wiring Diagrams and Troubleshooting Flowcharts.mp3 |
| UNIT_21/Unit_21_03_Refrigeration.mp3 |
| UNIT_13/Unit_13_04_The Bimetal Device.mp3 |
| UNIT_37/Unit_37_11_The Supply Duct System.mp3 |
| UNIT_48/Unit_48_37_Motors and Drives for Compression Cycle Chillers.mp3 |
| UNIT_17/Unit_17_20_The Current Relay.mp3 |
| UNIT_50/Unit_50_17_Low-Pressure Chillers.mp3 |
| UNIT_37/Unit_37_19_Fiberglass Duct.mp3 |
| UNIT_07/Unit_07_04_Types and Sizes of Tubing.mp3 |
| UNIT_34/Unit_34_14_Service, Troubleshooting, and Preventive Maintenance.mp3 |
| UNIT_31/Unit_31_18_Limit Switch.mp3 |
| UNIT_15/Unit_15_04_Troubleshooting a Simple Circuit.mp3 |
| UNIT_17/Unit_17_07_Starting and Running Characteristics.mp3 |
| UNIT_25/Unit_25_09_Crankcase Pressure Regulator.mp3 |
| UNIT_41/Unit_41_06_Gage Manifold Usage.mp3 |
| UNIT_47/Unit_47_06_The Refrigeration Cycle, Heating (Heat Pump).mp3 |
| UNIT_37/Unit_37_06_The Blower.mp3 |
| UNIT_14/Unit_14_19_Water Pressure Regulators.mp3 |
| UNIT_50/Unit_50_18_Recovering Refrigerant from a Low-Pressure Chiller.mp3 |
| UNIT_31/Unit_31_07_Gas Regulators.mp3 |
| UNIT_28/Unit_29_06_Railway Refrigeration.mp3 |
| UNIT_48/Unit_48_08_Rotary Screw Compressor Chillers.mp3 |
| UNIT_08/Unit_08_09_Theory Involved with Evacuation.mp3 |
| UNIT_43/Unit_43_21_Air Temperature of the Conditioned Air.mp3 |
| UNIT_07/Unit_07_20_Plastic Pipe.mp3 |
| UNIT_03/Unit_03_16_Refrigerants Must Be Detectable.mp3 |
| UNIT_35/Unit_35_14_Plotting on the Psychrometric Chart.mp3 |
| UNIT_19/Unit_19_07_Motor Starters.mp3 |
| UNIT_43/Unit_43_33_Checking the Charge.mp3 |
| UNIT_35/Unit_35_13_The Psychrometric Chart.mp3 |
| UNIT_48/Unit_48_41_Electronic Starters.mp3 |
| UNIT_26/Unit_26_29_Water Coolers.mp3 |
| UNIT_36/Unit_36_04_Structural Heat Gain.mp3 |
| UNIT_17/Unit_17_15_Permanent Split-Capacitor Motors.mp3 |
| UNIT_22/Unit_22_23_Floating Head Pressures.mp3 |
| UNIT_19/Unit_19_08_Motor Protection.mp3 |
| UNIT_48/Unit_48_34_Purge System.mp3 |
| UNIT_26/Unit_26_10_Pressurized Liquid Systems.mp3 |
| UNIT_14/Unit_14_08_Measuring the Temperature of Fluids.mp3 |
| UNIT_07/Unit_07_21_Alternative Mechanical Piping Connections.mp3 |
| UNIT_15/Unit_15_08_Troubleshooting Voltage in the Low-Voltage Circuit.mp3 |
| UNIT_32/Unit_32_17_Condensing Oil Furnace.mp3 |
| UNIT_48/Unit_48_35_Absorption System Heat Exchangers.mp3 |
| UNIT_12/Unit_12_23_Sine Waves.mp3 |
| UNIT_30/Unit_30_14_Control Circuits for Forced-Air Electric Furnaces.mp3 |
| UNIT_12/Unit_12_19_Transformers.mp3 |
| UNIT_29/Unit_29_20_Closed-Loop Compressor Running Bench Test.mp3 |
| UNIT_39/Unit_39_09_Safety Controls for Older Air-Cooled Systems.mp3 |
| UNIT_12/Unit_12_13_Ohm's Law.mp3 |
| UNIT_03/Unit_03_23_Plotting Refrig Cycle for Blends w Temp Glide (Zeotropic Blends).mp3 |
| UNIT_37/Unit_37_08_Air-Measuring Instruments for Duct Systems.mp3 |
| UNIT_13/Unit_13_06_The Thermocouple.mp3 |
| UNIT_12/Unit_12_27_Summary.mp3 |
| UNIT_40/Unit_40_12_Equipment Efficiency Rating.mp3 |
| UNIT_14/Unit_14_14_Low-Pressure Controls.mp3 |
| UNIT_36/Unit_36_17_The Rotary Compressor.mp3 |
| UNIT_08/Unit_08_14_Multiple Evacuation.mp3 |
| UNIT_16/Unit_16_09_Summary.mp3 |
| UNIT_45/Unit_45_05_Natural-Draft Evaporators.mp3 |
| UNIT_04/Unit_04_04_Heat.mp3 |
| UNIT_48/Unit_48_27_Purge Units.mp3 |
| UNIT_19/Unit_19_05_The Relay.mp3 |
| UNIT_35/Unit_35_08_Absolute and Relative Humidity.mp3 |
| UNIT_40/Unit_40_06_Evaporator Operating Conditions.mp3 |
| UNIT_36/Unit_36_09_Design Conditions.mp3 |
| UNIT_29/Unit_29_11_Typical Operating Conditions for Recirculated Water Systems.mp3 |
| UNIT_14/Unit_14_12_Pressure Transducers.mp3 |
| UNIT_07/Unit_07_09_Soldering and Brazing Processes.mp3 |
| UNIT_13/Unit_13_07_Electronic Temperature-Sensing Devices.mp3 |
| UNIT_23/Unit_23_12_Summary.mp3 |
| UNIT_49/Unit_49_03_Cooling Tower Function.mp3 |
| UNIT_37/Unit_37_10_Types of Fan Drives.mp3 |
| UNIT_45/Unit_45_31_System Evacuation.mp3 |
| UNIT_44/Unit_44_15_Summary.mp3 |
| UNIT_10/Unit_10_06_Weighing Refrigerant.mp3 |
| UNIT_45/Unit_45_32_Capillary Tube Repair.mp3 |
| UNIT_37/Unit_37_38_Summary.mp3 |
| UNIT_25/Unit_26_43_Suction Service Valves.mp3 |
| UNIT_49/Unit_49_13_Blowdown.mp3 |
| UNIT_39/Unit_39_02_Controls for Air Conditioning.mp3 |
| UNIT_03/Unit_03_03_Introduction to Refrigeration.mp3 |
| UNIT_37/Unit_37_14_The Reducing Plenum System.mp3 |
| UNIT_25/Unit_25_08_Electric Evaporator Pressure-Regulating Valve.mp3 |
| UNIT_24/Unit_24_20_Balanced-Port TXV.mp3 |
| UNIT_40/Unit_40_03_Mechanical Operating Conditions.mp3 |
| UNIT_43/Unit_43_20_The Indoor Unit.mp3 |
| UNIT_32/Unit_32_15_Combustion Chamber.mp3 |
| UNIT_43/Unit_43_30_Troubleshooting Mechanical Problems.mp3 |
| UNIT_17/Unit_17_14_Capacitor-Start, Capacitor-Run Motors.mp3 |
| UNIT_35/Unit_35_09_Superheated Gases in Air.mp3 |
| UNIT_49/Unit_49_09_Fan Section.mp3 |
| UNIT_08/Unit_08_13_Deep Vacuum.mp3 |
| UNIT_21/Unit_21_16_Hot Pulldown (Excessively Loaded Evaporation).mp3 |
| UNIT_48/Unit_48_03_Chillers.mp3 |
| UNIT_35/Unit_35_06_Psychrometrics.mp3 |
| UNIT_17/Unit_17_18_Single-Phase Hermetic Motors.mp3 |
| UNIT_12/Unit_12_12_Making Electrical Measurements.mp3 |
| UNIT_12/Unit_12_20_Capacitance.mp3 |
| UNIT_20/Unit_20_11_Short Circuit to Ground (Frame).mp3 |
| UNIT_45/Unit_45_08_The Condenser.mp3 |
| UNIT_23/Unit_23_08_Reciprocating Compressor Efficiency.mp3 |
| UNIT_33/Unit_33_13_Summary.mp3 |
| UNIT_34/Unit_34_10_Duct Cleaning.mp3 |
| UNIT_48/Unit_48_50_Summary.mp3 |
| UNIT_38/Unit_38_15_Summary.mp3 |
| UNIT_46/Unit_46_10_Typical Operating Conditions, Evaporator.mp3 |
| UNIT_25/Unit_25_13_Fan-Cycling Head Pressure Controls.mp3 |
| UNIT_16/Unit_16_02_Control Applications.mp3 |
| UNIT_35/Unit_35_05_The Comfort Chart.mp3 |
| UNIT_43/Unit_43_04_Heat Sources for Winter.mp3 |
| UNIT_36/Unit_36_07_The Evaporator.mp3 |
| UNIT_43/Unit_43_09_Thermostatic Expansion Valves.mp3 |
| UNIT_29/Unit_29_07_Typical Air-Cooled Condenser Operating Conditions.mp3 |
| UNIT_31/Unit_31_01_Objectives.mp3 |
| UNIT_05/Unit_05_04_Specialized Hand Tools.mp3 |
| UNIT_50/Unit_50_04_Scroll Chiller Start-Up.mp3 |
| UNIT_27/Unit_27_03_Ice-Making Equipment, Packaged Type.mp3 |
| UNIT_17/Unit_17_04_Electric Motors and Magnetism.mp3 |
| UNIT_48/Unit_48_44_Mechanical-Electrical Motor Overload Protection.mp3 |
| UNIT_48/Unit_48_14_Water-Cooled Condensers.mp3 |
| UNIT_10/Unit_10_11_Summary.mp3 |
| UNIT_25/Unit_25_19_Low-Pressure Switch.mp3 |
| UNIT_47/Unit_47_04_Room Air Conditioning, Cooling.mp3 |
| UNIT_31/Unit_31_30_Troubleshooting the Safety Pilot-Proving Device-The Thermocouple.mp3 |
| UNIT_45/Unit_45_14_Compresor Controls.mp3 |
| UNIT_09/Unit_09_09_HFC Refrigerants.mp3 |
| UNIT_05/Unit_05_05_Tubing Tools.mp3 |
| UNIT_29/Unit_29_10_Typical Operating Conditions for Wastewater Condenser Systems.mp3 |
| UNIT_04/Unit_04_01_Objectives.mp3 |
| UNIT_24/Unit_24_25_The Solid-State Controlled Expansion Valve.mp3 |
| UNIT_25/Unit_26_50_Pressure Access Ports.mp3 |
| UNIT_48/Unit_48_29_Solution Strength.mp3 |
| UNIT_46/Unit_46_04_The Cabinet or Box.mp3 |
| UNIT_09/Unit_09_07_CFC Refrigerants.mp3 |
| UNIT_06/Unit_06_04_Staples and Rivets.mp3 |
| UNIT_48/Unit_48_16_Air-Cooled Condensers.mp3 |
| UNIT_45/Unit_45_22_Cabinet Problems.mp3 |
| UNIT_25/Unit_26_30_Defrost Using Internal Heat (Hot Gas Defrost).mp3 |
| UNIT_26/Unit_26_05_Self-Contained Reach-In Fixtures.mp3 |
| UNIT_39/Unit_39_08_Operating Controls for Older Air-Cooled Systems.mp3 |
| UNIT_50/Unit_50_02_Safety Checklist.mp3 |
| UNIT_16/Unit_16_04_Pneumatic Controls.mp3 |
| UNIT_45/Unit_45_03_Refrigeration.mp3 |
| UNIT_09/Unit_09_16_Regulations.mp3 |
| UNIT_04/Unit_04_06_Mechanical Equipment.mp3 |
| UNIT_08/Unit_08_12_The Vacuum Pump.mp3 |
| UNIT_25/Unit_25_11_Relief Valves.mp3 |
| UNIT_02/Unit_02_15_Electrical Power-The Watt.mp3 |
| UNIT_29/Unit_29_21_Closed-Loop Compressor Running Field Test.mp3 |
| UNIT_07/Unit_07_16_Swaging Techniques.mp3 |
| UNIT_24/Unit_24_17_TXV with External Equalizers.mp3 |
| UNIT_24/Unit_24_03_Expansion Devices.mp3 |
| UNIT_29/Unit_29_24_Summary.mp3 |
| UNIT_27/Unit_27_09_Package Ice Machine Location.mp3 |
| UNIT_33/Unit_33_03_Introduction to Hydronic Heating.mp3 |
| UNIT_01/Unit_01_17_Summary.mp3 |
| UNIT_14/Unit_14_23_Maintenance of Mechanical Controls.mp3 |
| UNIT_01/Unit_01_15_Temperature Conversion-Farenheit and Celsius.mp3 |
| UNIT_26/Unit_26_14_Temperature Control of the Fixture.mp3 |
| UNIT_45/Unit_45_16_Defrost Cycle.mp3 |
| UNIT_45/Unit_45_35_Summary.mp3 |
| UNIT_43/Unit_43_02_Safety Checklist.mp3 |
| UNIT_29/Unit_29_18_Inefficient Compressor.mp3 |
| UNIT_39/Unit_39_10_Operating Controls for Modern Equipment.mp3 |
| UNIT_50/Unit_50_22_Summary.mp3 |
| UNIT_30/Unit_30_11_The Low-Voltage Thermostat.mp3 |
| UNIT_37/Unit_37_07_System Pressures.mp3 |
| UNIT_21/Unit_21_18_Liquid Cooling Evaporators (Chillers).mp3 |
| UNIT_01/Unit_01_14_Pressure Gages.mp3 |
| UNIT_21/Unit_21_09_Heat Exchange Characteristics of the Evaporator.mp3 |
| UNIT_21/Unit_21_21_Summary.mp3 |
| UNIT_48/Unit_48_05_Reciprocating Compressor Chillers.mp3 |
| UNIT_47/Unit_47_08_Controls for Room Units, Cooling.mp3 |
| UNIT_21/Unit_21_17_Pressure Drop in Evaporators.mp3 |
| UNIT_29/Unit_29_08_Calculating the Correct Head Pressure for Air-Cooled Equipment.mp3 |
| UNIT_45/Unit_45_11_Metering Device.mp3 |
| UNIT_19/Unit_19_10_External Motor Protection.mp3 |
| UNIT_20/Unit_20_04_Mechanical Motor Problems.mp3 |
| UNIT_09/Unit_09_11_Naming Refrigerants.mp3 |
| UNIT_50/Unit_50_09_Scroll and Reciprocating Chiller Operation.mp3 |
| UNIT_36/Unit_36_14_Cooling the Compressor and Motor.mp3 |
| UNIT_29/Unit_29_19_Compressor Vacuum Test.mp3 |
| UNIT_12/Unit_12_07_Electricity Produced from Magnetism.mp3 |
| UNIT_19/Unit_19_03_Introduction to Motor Control Devices.mp3 |
| UNIT_08/Unit_08_07_Repairing Leaks.mp3 |
| UNIT_36/Unit_36_08_The Function of the Evaporator.mp3 |
| UNIT_22/Unit_22_15_Forced-or Induced-Draft Towers.mp3 |
| UNIT_42/Unit_42_17_Servicing the All-Weather System.mp3 |
| UNIT_06/Unit_06_06_Concrete Fasteners.mp3 |
| UNIT_25/Unit_26_52_Summary.mp3 |
| UNIT_38/Unit_38_04_Square and Rectangular Duct.mp3 |
| UNIT_19/Unit_19_06_The Contactor.mp3 |
| UNIT_43/Unit_43_23_Package Air-To-Air Heat Pumps.mp3 |
| UNIT_07/Unit_07_07_Cutting Tubing.mp3 |
| UNIT_24/Unit_24_14_The Vapor Charge Bulb.mp3 |
| UNIT_38/Unit_38_06_Insulation for Metal Duct.mp3 |
| UNIT_14/Unit_14_26_Summary.mp3 |
| UNIT_23/Unit_23_10_Liquid in the Compressor Cylinder.mp3 |
| UNIT_01/Unit_01_11_Sizing Heating Equipment.mp3 |
| UNIT_03/Unit_03_24_Summary.mp3 |
| UNIT_35/Unit_35_03_Food Energy and the Body.mp3 |
| UNIT_41/Unit_41_04_Mechanical Troubleshooting.mp3 |
| UNIT_24/Unit_24_21_Dual-Port TXV.mp3 |
| UNIT_50/Unit_50_16_General Maintenance for All Chillers.mp3 |
| UNIT_37/Unit_37_31_The Return Air Duct System.mp3 |
| UNIT_12/Unit_12_03_Structure of Matter.mp3 |
| UNIT_49/Unit_49_06_Fill Material.mp3 |
| UNIT_21/Unit_21_08_Removing Moisture.mp3 |
| UNIT_35/Unit_35_04_Heat Transfer to and from the Body.mp3 |
| UNIT_02/Unit_02_16_Summary.mp3 |
| UNIT_41/Unit_41_09_High-Side Gage Readings.mp3 |
| UNIT_32/Unit_32_21_Summary.mp3 |
| UNIT_14/Unit_14_18_Devices That Control Fluid Flow and Do Not Contain Switches.mp3 |
| UNIT_11/Unit_11_08_Flue-Gas Analysis Instruments.mp3 |
| UNIT_26/Unit_26_26_Refrigeration Piping.mp3 |
| UNIT_36/Unit_36_26_Air-Side Components.mp3 |
| UNIT_20/Unit_20_05_Removing Drive Assemblies.mp3 |
| UNIT_01/Unit_01_06_Convection.mp3 |
| UNIT_43/Unit_43_32_Troubleshooting the Compressor.mp3 |
| UNIT_41/Unit_41_07_When to Connect the Gages.mp3 |
| UNIT_36/Unit_36_18_The Scroll Compressor.mp3 |
| UNIT_20/Unit_20_13_Checking Capacitors.mp3 |
| UNIT_34/Unit_34_04_Sources of Indoor Air Pollution.mp3 |
| UNIT_01/Unit_01_12_Pressure.mp3 |
| UNIT_22/Unit_22_16_Evaporative Condensers.mp3 |
| UNIT_17/Unit_17_09_Single-Phase Open Motors.mp3 |
| UNIT_48/Unit_48_33_Crystallization.mp3 |
| UNIT_30/Unit_30_12_Controlling Multiple Stages.mp3 |
| UNIT_15/Unit_15_07_Troubleshooting Amperage in the Low-Voltage Circuit.mp3 |
| UNIT_50/Unit_50_14_Absorption Chilled-Water System Start-Up.mp3 |
| UNIT_25/Unit_26_42_Suction-Line Filter Driers.mp3 |
| UNIT_09/Unit_09_08_HCFC Refrigerants.mp3 |
| UNIT_17/Unit_17_27_Inverters.mp3 |
| UNIT_05/Unit_05_03_General Hand Tools.mp3 |
| UNIT_32/Unit_32_13_Stack Switch Safety Control.mp3 |
| UNIT_17/Unit_17_26_DC Converters (Rectifiers).mp3 |
| UNIT_46/Unit_46_18_Summary.mp3 |
| UNIT_07/Unit_07_12_Brazing Techniques.mp3 |
| UNIT_48/Unit_48_17_Subcooling Circuit.mp3 |
| UNIT_17/Unit_17_11_The Centrifugal Switch.mp3 |
| UNIT_24/Unit_24_33_Summary.mp3 |
| UNIT_48/Unit_48_31_Circulating Pumps for Absorption Systems.mp3 |
| UNIT_02/Unit_02_02_Matter.mp3 |
| UNIT_09/Unit_09_06_Refrigerants.mp3 |
| UNIT_19/Unit_19_12_Temperature-Sensing Devices.mp3 |
| UNIT_36/Unit_36_12_The Reciprocating Compressor.mp3 |
| UNIT_37/Unit_37_30_Blending the Conditioned Air with Room Air.mp3 |
| UNIT_24/Unit_24_04_Thermostatic Expansion Valve.mp3 |
| UNIT_25/Unit_26_35_The King Valve on the Receiver.mp3 |
| UNIT_09/Unit_09_02_Safety Checklist.mp3 |
| UNIT_46/Unit_46_06_The Evaporator.mp3 |
| UNIT_20/Unit_20_06_Belt Tension.mp3 |
| UNIT_01/Unit_01_07_Radiation.mp3 |
| UNIT_39/Unit_39_13_Electronic Controls and Air-Conditioning Equipment.mp3 |
| UNIT_40/Unit_40_13_Typical Electrical Operating Conditions.mp3 |
| UNIT_29/Unit_29_05_Troubleshooting Medium-Temperature Applications.mp3 |
| UNIT_41/Unit_41_15_Troubleshooting the Circuit Electrical Protectors-Fuses and Breakers.mp3 |
| UNIT_21/Unit_21_04_Temperature Ranges of Refrigeration.mp3 |
| UNIT_14/Unit_14_24_Maintenance of Electromechanical Controls.mp3 |
| UNIT_22/Unit_22_06_Mineral Deposits.mp3 |
| UNIT_40/Unit_40_07_High Evaporator Load and a Cool Condenser.mp3 |
| UNIT_31/Unit_31_02_Safety Checklist.mp3 |
| UNIT_46/Unit_46_08_The Condenser.mp3 |
| UNIT_45/Unit_45_27_Evaporator Leaks.mp3 |
| UNIT_24/Unit_24_06_The Valve Body.mp3 |
| UNIT_26/Unit_26_04_Reach-In Refrigeration Merchandising.mp3 |
| UNIT_08/Unit_08_03_Reliant and Efficient Systems.mp3 |
| UNIT_14/Unit_14_13_High-Pressure Controls.mp3 |
| UNIT_13/Unit_13_08_Summary.mp3 |
| UNIT_48/Unit_48_38_Part-Winding Start.mp3 |
| UNIT_22/Unit_22_26_Summary.mp3 |
| UNIT_43/Unit_43_03_Reverse-Cycle Refrigeration.mp3 |
| UNIT_22/Unit_22_14_Natural-Draft Towers.mp3 |
| UNIT_09/Unit_09_21_Reclaiming Refrigerant.mp3 |
| UNIT_48/Unit_48_25_Condensers for Low-Pressure Chillers.mp3 |
| UNIT_48/Unit_48_48_Voltage Unbalance.mp3 |
| UNIT_48/Unit_48_07_Scroll Compressor Chillers.mp3 |
| UNIT_43/Unit_43_15_Application of the Air-To-Air Heat Pump.mp3 |
| UNIT_08/Unit_08_15_Leak Detection While in a Vacuum.mp3 |
| UNIT_35/Unit_35_16_Summary.mp3 |
| UNIT_33/Unit_33_01_Objectives.mp3 |
| UNIT_45/Unit_45_25_Refrigerant Overcharge.mp3 |
| UNIT_38/Unit_38_08_Flexible Duct.mp3 |
| UNIT_46/Unit_46_16_Temporary Food Storage.mp3 |
| UNIT_45/Unit_45_20_Ice-Maker Operation.mp3 |
| UNIT_45/Unit_45_04_The Evaporator.mp3 |
| UNIT_25/Unit_26_23_Low-Ambient Fan Control.mp3 |
| UNIT_13/Unit_13_02_Types of Automatic Controls.mp3 |
| UNIT_35/Unit_35_12_Enthalpy.mp3 |
| UNIT_26/Unit_26_19_Controlling Sweating on the Cabinet of Fixtures.mp3 |
| UNIT_50/Unit_50_06_Rotary Screw Chiller Start-Up.mp3 |
| UNIT_24/Unit_24_10_The Sensing Bulb and Transmission Tube.mp3 |
| UNIT_03/Unit_03_05_Rating Refrigeration Equipment.mp3 |
| UNIT_38/Unit_38_07_Ductboard Systems.mp3 |
| UNIT_36/Unit_36_06_Refrigerated Cooling or Air Conditioning.mp3 |
| UNIT_18/Unit_18_06_Insulation Type or Class.mp3 |
| UNIT_26/Unit_26_11_Unitary Stand-Alone Refrigeration Systems.mp3 |
| UNIT_32/Unit_32_04_Physical Characteristics.mp3 |
| UNIT_14/Unit_14_16_Air Pressure Controls.mp3 |
| UNIT_01/Unit_01_05_Conduction.mp3 |
| UNIT_43/Unit_43_14_Liquid-Line Accessories.mp3 |
| UNIT_11/Unit_11_03_Calibration.mp3 |
| UNIT_17/Unit_17_24_Three-Phase Motor Compressors.mp3 |
| UNIT_37/Unit_37_13_The Extended Plenum System.mp3 |
| UNIT_41/Unit_41_08_Low-Side Gage Readings.mp3 |
| UNIT_02/Unit_02_10_Enery Contained in Heat.mp3 |
| UNIT_46/Unit_46_12_Typical Operating Conditions, Compressor.mp3 |
| UNIT_49/Unit_49_07_Flow Patterns.mp3 |
| UNIT_24/Unit_24_29_Automatic Expansion Valve Response to Load Changes.mp3 |
| UNIT_07/Unit_07_22_Summary.mp3 |
| UNIT_21/Unit_21_07_The Evaporator and Boiling Temperature.mp3 |
| UNIT_48/Unit_48_04_Compression Cycle Chillers.mp3 |
| UNIT_17/Unit_17_06_Start Windings.mp3 |
| UNIT_02/Unit_02_14_Power.mp3 |
| UNIT_44/Unit_44_04_Geothermal Heat Pump Classifications.mp3 |
| UNIT_42/Unit_42_08_Cooling Versus Heating Air Quantity.mp3 |
| UNIT_43/Unit_43_06_The Air-To-Air Heat Pump.mp3 |
| UNIT_30/Unit_30_03_Introduction.mp3 |
| UNIT_39/Unit_39_14_Summary.mp3 |
| UNIT_41/Unit_41_02_Safety Checklist.mp3 |
| UNIT_07/Unit_07_14_Making Flare Joints.mp3 |
| UNIT_41/Unit_41_13_Compressor Overload Problems.mp3 |
| UNIT_12/Unit_12_17_Magnetism.mp3 |
| UNIT_36/Unit_36_25_Expansion Devices.mp3 |
| UNIT_20/Unit_20_09_Open Windings.mp3 |
| UNIT_49/Unit_49_11_Tower Sump.mp3 |
| UNIT_11/Unit_11_02_The Need for Calibration.mp3 |
| UNIT_04/Unit_04_10_Summary.mp3 |
| UNIT_19/Unit_19_14_Restarting the Motor.mp3 |
| UNIT_43/Unit_43_28_Servicing the Air-To-Air Heat Pump.mp3 |
| UNIT_26/Unit_26_13_Interconnecting Piping in Multiple-Evaporator Installations.mp3 |
| UNIT_25/Unit_26_31_External Heat Type of Defrost.mp3 |
| UNIT_26/Unit_26_24_Evaporator Location in a Walk-In Cooler.mp3 |
| UNIT_03/Unit_03_19_Popular Refrigerants and Their Important Characteristics.mp3 |
| UNIT_48/Unit_48_01_Objectives.mp3 |
| UNIT_30/Unit_30_09_Central Forced-Air Electric Furnaces.mp3 |
| UNIT_15/Unit_15_12_Summary.mp3 |
| UNIT_31/Unit_31_10_Diaphragm Valve.mp3 |
| UNIT_45/Unit_45_29_Refrigerant Piping Leaks.mp3 |
| UNIT_03/Unit_03_15_Refrigerants Must Be Safe.mp3 |
| UNIT_25/Unit_26_40_Heat Exchangers.mp3 |
| UNIT_17/Unit_17_13_Capacitor-Start Motors.mp3 |
| UNIT_04/Unit_04_09_Using Chemicals.mp3 |
| UNIT_36/Unit_36_05_Evaporative Cooling.mp3 |
| UNIT_40/Unit_40_16_Finding a Point of Reference for an Unknown Motor Rating.mp3 |
| UNIT_41/Unit_41_05_Approach Temperature and Temperature Difference.mp3 |
| UNIT_48/Unit_48_23_Low-Pressure Chillers.mp3 |
| UNIT_48/Unit_48_21_Float-Type Metering Devices.mp3 |
| UNIT_02/Unit_02_08_Energy.mp3 |
| UNIT_32/Unit_32_08_Combustion.mp3 |
| UNIT_22/Unit_22_12_Recirculated Water Systems.mp3 |
| UNIT_08/Unit_08_18_Systems with Schrader Valves.mp3 |
| UNIT_31/Unit_31_25_Two-Stage Gas Furnaces.mp3 |
| UNIT_42/Unit_42_10_Two Low-Voltage Power Supplies.mp3 |
| UNIT_44/Unit_44_03_Reverse-Cycle Refrigeration.mp3 |
| UNIT_40/Unit_40_14_Matching the Unit to the Correct Power Supply.mp3 |
| UNIT_31/Unit_31_19_Pilots.mp3 |
| UNIT_03/Unit_03_01_Objectives.mp3 |
| UNIT_03/Unit_03_20_Refrigerant Cylinder Color Codes.mp3 |
| UNIT_30/Unit_30_04_Portable Electric Heating Devices.mp3 |
| UNIT_40/Unit_40_17_Determining the Compressor Running Amperage.mp3 |
| UNIT_47/Unit_47_12_Summary.mp3 |
| UNIT_49/Unit_49_08_Tower Materials.mp3 |
| UNIT_35/Unit_35_02_Comfort.mp3 |
| UNIT_26/Unit_26_16_Chest-Type Display Fixtures.mp3 |
| UNIT_30/Unit_30_08_Electric Hydronic Boilers.mp3 |
| UNIT_25/Unit_25_16_Condenser Flooding for Controlling Head Pressure.mp3 |
| UNIT_37/Unit_37_23_Duct Air Movement.mp3 |
| UNIT_37/Unit_37_29_Duct Insulation.mp3 |
| UNIT_45/Unit_45_09_Defrost Condensate, Automatic Defrost.mp3 |
| UNIT_36/Unit_36_15_Compressor Mountings.mp3 |
| UNIT_28/Unit_29_04_Transport Refrigeration.mp3 |
| UNIT_19/Unit_19_15_Summary.mp3 |
| UNIT_01/Unit_01_16_Pressure Measured in Metric Terms.mp3 |
| UNIT_48/Unit_48_30_Solutions Inside the Absorption System.mp3 |
| UNIT_50/Unit_50_10_Large Positive Displacement Chiller Operation.mp3 |
| UNIT_26/Unit_26_20_Maintaining Store Ambient Conditions.mp3 |
| UNIT_36/Unit_36_24_Cabinet Design.mp3 |
| UNIT_49/Unit_49_10_Tower Access.mp3 |
| UNIT_21/Unit_21_19_Evaporators for Low-Temperature Application.mp3 |
| UNIT_25/Unit_26_39_Liquid Refrigerant Distributors.mp3 |
| UNIT_12/Unit_12_16_Electrical Power.mp3 |
| UNIT_04/Unit_04_07_Moving Heavy Objects.mp3 |
| UNIT_25/Unit_25_07_Multiple Evaporators.mp3 |
| UNIT_23/Unit_23_09_Discus Valve Design.mp3 |
| UNIT_46/Unit_46_13_Controls.mp3 |
| UNIT_30/Unit_30_19_Summary.mp3 |
| UNIT_12/Unit_12_10_Electrical Units of Measurement.mp3 |
| UNIT_40/Unit_40_10_Establishing a Reference Point on Unknown Equipment.mp3 |
| UNIT_49/Unit_49_14_Balancing the Water Flow for a Tower.mp3 |
| UNIT_04/Unit_04_05_Cold.mp3 |
| UNIT_46/Unit_46_11_Typical Operating Conditions, Condenser.mp3 |
| UNIT_45/Unit_45_19_Refrigerator Fan Motors.mp3 |
| UNIT_24/Unit_24_28_The Automatic Expansion Valve.mp3 |
| UNIT_18/Unit_18_03_Motor Applications.mp3 |
| UNIT_50/Unit_50_11_Centrifugal Chiller Operation.mp3 |
| UNIT_14/Unit_14_02_Safety Checklist.mp3 |
| UNIT_37/Unit_37_04_Correct Air Quantity.mp3 |
| UNIT_22/Unit_22_18_High-Efficiency Condensers.mp3 |
| UNIT_50/Unit_50_19_High-Pressure Chillers.mp3 |
| UNIT_39/Unit_39_12_The Working Control Package.mp3 |
| UNIT_38/Unit_38_05_Round Metal Duct Systems.mp3 |
| UNIT_22/Unit_22_03_The Condenser.mp3 |
| UNIT_06/Unit_06_03_Nails.mp3 |
| UNIT_20/Unit_20_16_Troubleshooting Hermetic Motors.mp3 |
| UNIT_24/Unit_24_09_The Spring.mp3 |
| UNIT_03/Unit_03_17_The Boiling Point of the Refrigerant.mp3 |
| UNIT_07/Unit_07_17_Steel and Wrought Iron Pipe.mp3 |
| UNIT_24/Unit_24_12_The Liquid Charge Bulb.mp3 |
| UNIT_40/Unit_40_09_Documentation with the Unit.mp3 |
| UNIT_48/Unit_48_39_Autotransformer Start.mp3 |
| UNIT_24/Unit_24_23_Servicing the TXV.mp3 |
| UNIT_48/Unit_48_49_Phase Reversal.mp3 |
| UNIT_32/Unit_32_03_Introduction to Oil-Fired Forced-Warm Air Furnaces.mp3 |
| UNIT_07/Unit_07_05_Tubing Insulation.mp3 |
| UNIT_36/Unit_36_28_Summary.mp3 |
| UNIT_17/Unit_17_10_Split-Phase Motors.mp3 |
| UNIT_37/Unit_37_12_The Plenum System.mp3 |
| UNIT_17/Unit_17_21_Positive Temperature Coefficient Start Device.mp3 |
| UNIT_12/Unit_12_18_Inductance.mp3 |
| UNIT_37/Unit_37_03_Conditioning Equipment.mp3 |
| UNIT_14/Unit_14_20_Gas Pressure Regulators.mp3 |
| UNIT_40/Unit_40_21_Summary.mp3 |
| UNIT_34/Unit_34_13_Installation.mp3 |
| UNIT_48/Unit_48_45_Electronic Solid-State Overload Device Protection.mp3 |
| UNIT_49/Unit_49_12_Makeup Water.mp3 |
| UNIT_21/Unit_21_14_Dry-Type Evaporator Performance.mp3 |
| UNIT_24/Unit_24_24_Sensing Element Installation.mp3 |
| UNIT_26/Unit_26_22_Knock-Down Walk-In Coolers.mp3 |
| UNIT_49/Unit_49_16_Summary.mp3 |
| UNIT_32/Unit_32_09_Preparation of Fuel Oil for Combustion.mp3 |
| UNIT_45/Unit_45_26_Refrigerant Leaks.mp3 |
| UNIT_10/Unit_10_03_Charging a Refrigeration System.mp3 |
| UNIT_02/Unit_02_13_Energy Used as Work.mp3 |
| UNIT_45/Unit_45_06_Evaporator Defrost.mp3 |
| UNIT_48/Unit_48_11_Direct-Expansion Evaporators.mp3 |
| UNIT_49/Unit_49_05_Fire Protection.mp3 |
| UNIT_35/Unit_35_11_Dew Point Temperature.mp3 |
| UNIT_26/Unit_26_25_Condensate Removal.mp3 |
| UNIT_01/Unit_01_10_Specific Heat.mp3 |
| UNIT_03/Unit_03_18_Pumping Characteristics.mp3 |
| UNIT_40/Unit_40_20_Current Draw and the Two-Speed Compressor.mp3 |
| UNIT_39/Unit_39_05_Low-Voltage Controls.mp3 |
| UNIT_22/Unit_22_10_Wastewater Systems.mp3 |
| UNIT_26/Unit_26_15_The Evaporator and Merchandising.mp3 |
| UNIT_23/Unit_23_07_Direct-Drive Compressor Characteristics.mp3 |
| UNIT_32/Unit_32_02_Safety Checklist.mp3 |
| UNIT_12/Unit_12_01_Objectives.mp3 |
| UNIT_36/Unit_36_22_Condenser Coil Design.mp3 |
| UNIT_38/Unit_38_02_Safety Checklist.mp3 |
| UNIT_47/Unit_47_09_Controls, Cooling and Heating Units.mp3 |
| UNIT_21/Unit_21_15_Evaporator Superheat.mp3 |
| UNIT_43/Unit_43_16_Auxiliary Heat.mp3 |
| UNIT_47/Unit_47_03_Air Conditioning and Heating with Room Units.mp3 |
| UNIT_43/Unit_43_11_Combinations of Metering Devices.mp3 |
| UNIT_07/Unit_07_19_Installing Steel Pipe.mp3 |
| UNIT_37/Unit_37_22_Combination Duct Systems.mp3 |
| UNIT_30/Unit_30_05_Radiant Heating Panels.mp3 |
| UNIT_37/Unit_37_28_Adding Zoning to an Existing System.mp3 |
| UNIT_03/Unit_03_21_Recovery, Recycle, or Reclaim of Refrigerants.mp3 |
| UNIT_48/Unit_48_20_Orifice.mp3 |
| UNIT_40/Unit_40_19_High Voltage, the Compressor, and Current Draw.mp3 |
| UNIT_37/Unit_37_21_Flexible Duct.mp3 |
| UNIT_20/Unit_20_07_Pulley Alignment.mp3 |
| UNIT_30/Unit_30_13_Wiring Diagrams.mp3 |
| UNIT_40/Unit_40_15_Starting the Equipment with the Correct Data.mp3 |
| UNIT_18/Unit_18_05_Electric-Motor Working Conditions.mp3 |
| UNIT_17/Unit_17_22_Two-Speed Compressor Motors.mp3 |
| UNIT_17/Unit_17_16_Shaded-Pole Motors.mp3 |
| UNIT_37/Unit_37_24_Balancing Dampers.mp3 |
| UNIT_25/Unit_26_44_Discharge Service Valves.mp3 |
| UNIT_20/Unit_20_14_Identification of Capacitors.mp3 |
| UNIT_21/Unit_21_05_The Evaporator.mp3 |
| UNIT_37/Unit_37_35_Practical Troubleshooting Techniques.mp3 |
| UNIT_47/Unit_47_01_Objectives.mp3 |
| UNIT_25/Unit_26_34_Receivers.mp3 |
| UNIT_45/Unit_45_13_Wiring and Controls.mp3 |
| UNIT_21/Unit_21_12_Latent Heat in the Evaporator.mp3 |
| UNIT_24/Unit_24_18_TXV Response to Load Changes.mp3 |
| UNIT_11/Unit_11_09_General Maintenance.mp3 |
| UNIT_07/Unit_07_03_Purpose of Tubing and Piping.mp3 |
| UNIT_39/Unit_39_06_Some History of Residential Central Air Conditioning.mp3 |
| UNIT_21/Unit_21_13_The Flooded Evaporator.mp3 |
| UNIT_45/Unit_45_28_Condenser Leaks.mp3 |
| UNIT_43/Unit_43_07_Refrigerant Line Identification.mp3 |
| UNIT_09/Unit_09_22_Refrigerants and Tools in the Future.mp3 |
| UNIT_22/Unit_22_09_Shell-and-Tube Condensers.mp3 |
| UNIT_31/Unit_31_11_Heat Motor-Controlled Valve.mp3 |
| UNIT_48/Unit_48_10_Evaporators for High-Pressure Chillers.mp3 |
| UNIT_44/Unit_44_01_Objectives.mp3 |
| UNIT_36/Unit_36_03_Refrigeration.mp3 |
| UNIT_17/Unit_17_03_Parts of an Electric Motor.mp3 |
| UNIT_18/Unit_18_10_Summary.mp3 |
| UNIT_30/Unit_30_06_Electric Baseboard Heating.mp3 |
| UNIT_17/Unit_17_02_Uses of Electric Motors.mp3 |
| UNIT_26/Unit_26_03_Application Decisions.mp3 |
| UNIT_12/Unit_12_11_The Electrical Circuit.mp3 |
| UNIT_27/Unit_27_01_Objectives.mp3 |
| UNIT_01/Unit_01_02_How We Use Heat and Pressure.mp3 |
| UNIT_43/Unit_43_13_Orifice Metering Devices.mp3 |
| UNIT_48/Unit_48_42_Motor Protection.mp3 |
| UNIT_25/Unit_25_14_Fan Speed Control for Controlling Head Pressure.mp3 |
| UNIT_46/Unit_46_07_The Compressor.mp3 |
| UNIT_34/Unit_34_12_Sizing Humidifiers.mp3 |
| UNIT_03/Unit_03_04_Refrigeration.mp3 |
| UNIT_27/Unit_27_07_Making Cylindrical Ice.mp3 |
| UNIT_02/Unit_02_05_Specific Gravity.mp3 |
| UNIT_22/Unit_22_05_Tube-Within-a-Tube Condensers.mp3 |
| UNIT_10/Unit_10_01_Objectives.mp3 |
| UNIT_36/Unit_36_23_High-Efficiency Condensers.mp3 |
| UNIT_50/Unit_50_20_Refrigerant Safety.mp3 |
| UNIT_07/Unit_07_02_Safety Checklist.mp3 |
| UNIT_50/Unit_50_01_Objectives.mp3 |
| UNIT_26/Unit_26_27_Package Refrigeration For Walk-In Coolers.mp3 |
| UNIT_19/Unit_19_11_National Electrical Code Standards.mp3 |
| UNIT_30/Unit_30_16_Contactors for Controlling Electric Furnaces.mp3 |
| UNIT_12/Unit_12_04_Movement of Electrons.mp3 |
| UNIT_02/Unit_02_12_Purchase of Energy.mp3 |
| UNIT_14/Unit_14_22_Electromechanical Controls.mp3 |
| UNIT_31/Unit_31_03_Introduction to Gas-Fired, Forced-Hot-Air Furnaces.mp3 |
| UNIT_25/Unit_26_38_Refrigerant Sight Glasses.mp3 |
| UNIT_40/Unit_40_05_System Component Relationships Under Load Changes.mp3 |
| UNIT_22/Unit_22_13_Cooling Towers.mp3 |
| UNIT_42/Unit_42_04_Five Processes for Conditioning Air.mp3 |
| UNIT_24/Unit_24_19_TXV Valve Selection.mp3 |
| UNIT_17/Unit_17_23_Special Application Motors.mp3 |
| UNIT_42/Unit_42_12_Adding a Fan Relay.mp3 |
| UNIT_09/Unit_09_03_Refrigerants and the Environment.mp3 |
| UNIT_25/Unit_26_49_Vibration Eliminators.mp3 |
| UNIT_34/Unit_34_15_Summary.mp3 |
| UNIT_43/Unit_43_01_Objectives.mp3 |
| UNIT_22/Unit_22_22_Heat Reclaim.mp3 |
| UNIT_43/Unit_43_12_Electronic Expansion Valves.mp3 |
| UNIT_38/Unit_38_03_Introduction to Equipment Installation.mp3 |
| UNIT_02/Unit_02_11_Energy in Magnetism.mp3 |
| UNIT_26/Unit_26_18_Closed-Type Chest Fixtures.mp3 |
| UNIT_36/Unit_36_11_The Compressor.mp3 |
| UNIT_22/Unit_22_01_Objectives.mp3 |
| UNIT_02/Unit_02_03_Mass and Weight.mp3 |
| UNIT_45/Unit_45_17_Sweat Prevention Heaters.mp3 |
| UNIT_11/Unit_11_10_Summary.mp3 |
| UNIT_36/Unit_36_21_Top-Air-Discharge Condensers.mp3 |
| UNIT_12/Unit_12_21_Impedance.mp3 |
| UNIT_34/Unit_34_03_Introduction.mp3 |
| UNIT_25/Unit_26_26_Medium-Temperature Refrigeration.mp3 |
| UNIT_42/Unit_42_18_Summary.mp3 |
| UNIT_39/Unit_39_04_Prime Movers-Compressors and Fans.mp3 |
| UNIT_09/Unit_09_01_Objectives.mp3 |
| UNIT_44/Unit_44_02_Safety Checklist.mp3 |
| UNIT_24/Unit_24_22_Pressure-Limiting TXV.mp3 |
| UNIT_37/Unit_37_05_The Forced-Air System.mp3 |
| UNIT_42/Unit_42_14_All-Weather Split Systems.mp3 |
| UNIT_48/Unit_48_32_Capacity Control.mp3 |
| UNIT_45/Unit_45_10_Compressor Oil Coolers.mp3 |
| UNIT_33/Unit_33_10_Combination (High-and-Low-Temperature) Piping Systems.mp3 |
| UNIT_49/Unit_49_01_Objectives.mp3 |
| UNIT_14/Unit_14_01_Objectives.mp3 |
| UNIT_42/Unit_42_05_Add-On Air Conditioning.mp3 |
| UNIT_22/Unit_22_21_Using the Condenser Superheat.mp3 |
| UNIT_02/Unit_02_09_Conservation of Energy.mp3 |
| UNIT_25/Unit_25_10_Adjusting the CPR Valve.mp3 |
| UNIT_48/Unit_48_46_Anti-Recycle Control.mp3 |
| UNIT_24/Unit_24_30_Special Considerations for the TXV and AXV.mp3 |
| UNIT_05/Unit_05_02_Safety Checklist.mp3 |
| UNIT_42/Unit_42_11_Phasing Two Low-Voltage Transformers.mp3 |
| UNIT_06/Unit_06_08_Summary.mp3 |
| UNIT_02/Unit_02_01_Objectives.mp3 |
| UNIT_24/Unit_24_13_The Cross Liquid Charge Bulb.mp3 |
| UNIT_48/Unit_48_36_Direct-Fired Systems.mp3 |
| UNIT_29/Unit_29_02_Safety Checklist.mp3 |
| UNIT_02/Unit_02_04_ Density.mp3 |
| UNIT_20/Unit_20_03_Motor Troubleshooting.mp3 |
| UNIT_46/Unit_46_02_Safety Checklist.mp3 |
| UNIT_19/Unit_19_04_Run-Load and Locked-Rotor Amperage.mp3 |
| UNIT_26/Unit_26_12_Evaporator Temperature Control.mp3 |
| UNIT_08/Unit_08_11_Recovering Refrigerant.mp3 |
| UNIT_25/Unit_25_15_Air Volume Control for Controlling Head Pressure.mp3 |
| UNIT_17/Unit_17_01_Objectives.mp3 |
| UNIT_33/Unit_33_02_Safety Checklist.mp3 |
| UNIT_36/Unit_36_20_Side-Air-Discharge Condensing Units.mp3 |
| UNIT_20/Unit_20_02_Safety Checklist.mp3 |
| UNIT_01/Unit_01_01_Objectives.mp3 |
| UNIT_36/Unit_36_02_Safety Checklist.mp3 |
| UNIT_20/Unit_20_15_Wiring and Connectors.mp3 |
| UNIT_12/Unit_12_14_Characteristics of Series Circuits.mp3 |
| UNIT_26/Unit_26_06_Individual Condensing Units.mp3 |
| UNIT_32/Unit_32_01_Objectives.mp3 |
| UNIT_14/Unit_14_21_Mechanical Controls.mp3 |
| UNIT_20/Unit_20_18_Summary.mp3 |
| UNIT_43/Unit_43_17_Balance Point.mp3 |
| UNIT_41/Unit_41_01_Objectives.mp3 |
| UNIT_36/Unit_36_01_Objectives.mp3 |
| UNIT_25/Unit_26_37_Refrigerant Check Valves.mp3 |
| UNIT_25/Unit_25_12_Low-Ambient Controls.mp3 |
| UNIT_45/Unit_45_01_Objectives.mp3 |
| UNIT_09/Unit_09_10_HC Refrigerants.mp3 |
| UNIT_48/Unit_48_19_Thermostatic Expansion Valve.mp3 |
| UNIT_12/Unit_12_02_Safety Checklist.mp3 |
| UNIT_28/Unit_28_02_Safety Checklist.mp3 |
| UNIT_10/Unit_10_02_Safety Checklist.mp3 |
| UNIT_42/Unit_42_03_Comfort All Year.mp3 |
| UNIT_45/Unit_45_21_Refrigerator Service.mp3 |
| UNIT_25/Unit_25_02_Safety Checklist.mp3 |
| UNIT_47/Unit_47_02_Safety Checklist.mp3 |
| UNIT_17/Unit_17_29_Cooling Electric Motors.mp3 |
| UNIT_20/Unit_20_08_Electrical Problems.mp3 |
| UNIT_08/Unit_08_21_Using Dry Nitrogen.mp3 |
| UNIT_12/Unit_12_09_Alternating Current.mp3 |
| UNIT_25/Unit_26_27_Random or Off-Cycle Defrost.mp3 |
| UNIT_35/Unit_35_07_Moisture in Air.mp3 |
| UNIT_45/Unit_45_02_Safety Checklist.mp3 |
| UNIT_45/Unit_45_15_Compressor Start Circuit.mp3 |
| UNIT_25/Unit_26_46_Diaphragm Valves.mp3 |
| UNIT_08/Unit_08_20_System Valves.mp3 |
| UNIT_34/Unit_34_01_Objectives.mp3 |
| UNIT_43/Unit_43_08_Metering Devices.mp3 |
| UNIT_06/Unit_06_02_Safety Checklist.mp3 |
| UNIT_15/Unit_15_02_Safety Checklist.mp3 |
| UNIT_40/Unit_40_01_Objectives.mp3 |
| UNIT_07/Unit_07_06_Line Sets.mp3 |
| UNIT_36/Unit_36_10_Evaporator Application.mp3 |
| UNIT_22/Unit_22_07_Cleanable Condensers.mp3 |
| UNIT_46/Unit_46_01_Objectives.mp3 |
| UNIT_36/Unit_36_13_Compressor Speeds (RPM).mp3 |
| UNIT_42/Unit_42_15_Package or Self-Contained All-Weather Systems.mp3 |
| UNIT_07/Unit_07_01_Objectives.mp3 |
| UNIT_40/Unit_40_02_Safety Checklist.mp3 |
| UNIT_15/Unit_15_01_Objectives.mp3 |
| UNIT_34/Unit_34_07_Contamination Source Detection and Elimination.mp3 |
| UNIT_41/Unit_41_03_Introduction.mp3 |
| UNIT_42/Unit_42_13_New All-Weather Systems.mp3 |
| UNIT_40/Unit_40_18_Compressors Operating at Full-Load Current.mp3 |
| UNIT_36/Unit_36_16_Rebuilding the Hermetic Compressor.mp3 |
| UNIT_43/Unit_43_26_Indoor Fan Motor Control.mp3 |
| UNIT_38/Unit_38_01_Objectives.mp3 |
| UNIT_49/Unit_49_02_Safety Checklist.mp3 |
| UNIT_48/Unit_48_47_Phase Failure Protection.mp3 |
| UNIT_25/Unit_25_03_The Four Basic Components.mp3 |
| UNIT_22/Unit_22_24_Condenser Evaluation.mp3 |
| UNIT_26/Unit_26_02_Safety Checklist.mp3 |
| UNIT_42/Unit_42_09_Control Wiring for Cooling and Heating.mp3 |
| UNIT_29/Unit_29_09_Typical Operating Conditions for Water-Cooled Equipment.mp3 |
| UNIT_30/Unit_30_01_Objectives.mp3 |
| UNIT_42/Unit_42_01_Objectives.mp3 |
| UNIT_23/Unit_23_02_Safety Checklist.mp3 |
| UNIT_28/Unit_29_11_Air Cargo Hauling.mp3 |
| UNIT_37/Unit_37_17_Duct Materials.mp3 |
| UNIT_39/Unit_39_01_Objectives.mp3 |
| UNIT_12/Unit_12_05_Conductors.mp3 |
| UNIT_07/Unit_07_15_Making a Double-Thickness Flare.mp3 |
| UNIT_25/Unit_25_01_Objectives.mp3 |
| UNIT_21/Unit_21_06_Boiling and Condensing.mp3 |
| UNIT_12/Unit_12_08_Direct Current.mp3 |
| UNIT_08/Unit_08_19_Gage Manifold Hoses.mp3 |
| UNIT_22/Unit_22_08_Shell-and-Coil Condensers.mp3 |
| UNIT_25/Unit_26_28_Planned Defrost.mp3 |
| UNIT_11/Unit_11_01_Objectives.mp3 |
| UNIT_25/Unit_25_18_Pressure Switches.mp3 |
| UNIT_25/Unit_25_05_Two-Temperature Controls.mp3 |
| UNIT_06/Unit_06_01_Objectives.mp3 |
| UNIT_35/Unit_35_01_Objectives.mp3 |
| UNIT_43/Unit_43_19_Split-System Air-To-Air Heat Pump.mp3 |
| UNIT_43/Unit_43_10_The Capillary Tube.mp3 |
| UNIT_01/Unit_01_08_Sensible Heat.mp3 |
| UNIT_46/Unit_46_09_The Metering Device.mp3 |
| UNIT_25/Unit_26_47_Ball Valves.mp3 |
| UNIT_03/Unit_03_02_Safety Checklist.mp3 |
| UNIT_26/Unit_26_01_Objectives.mp3 |
| UNIT_08/Unit_08_01_Objectives.mp3 |
| UNIT_37/Unit_37_16_Duct System Standards.mp3 |
| UNIT_27/Unit_27_02_Safety Checklist.mp3 |
| UNIT_37/Unit_37_15_The Perimeter Loop System.mp3 |
| UNIT_19/Unit_19_13_Magnetic Overload Devices.mp3 |
| UNIT_31/Unit_31_09_Solenoid Valve.mp3 |
| UNIT_30/Unit_30_10_Automatic Controls for Forced-Air Electric Furnaces.mp3 |
| UNIT_29/Unit_29_01_Objectives.mp3 |
| UNIT_28/Unit_28_01_Objectives.mp3 |
| UNIT_42/Unit_42_16_Wiring the All-Weather System.mp3 |
| UNIT_13/Unit_13_01_Objectives.mp3 |
| UNIT_22/Unit_22_04_Water-Cooled Condensers.mp3 |
| UNIT_21/Unit_21_01_Objectives.mp3 |
| UNIT_14/Unit_14_03_Recognition of Control Components.mp3 |
| UNIT_19/Unit_19_01_Objectives.mp3 |
| UNIT_24/Unit_24_01_Objectives.mp3 |
| UNIT_48/Unit_48_13_Condensers for High-Pressure Chillers.mp3 |
| UNIT_30/Unit_30_07_Unit Heaters.mp3 |
| UNIT_19/Unit_19_02_Safety Checklist.mp3 |
| UNIT_31/Unit_31_08_Gas Valve.mp3 |
| UNIT_14/Unit_14_17_Gas Pressure Switches.mp3 |
| UNIT_26/Unit_26_17_Refrigerated Shelves.mp3 |
| UNIT_37/Unit_37_01_Objectives.mp3 |
| UNIT_09/Unit_09_14_Refrigerant Oils and Their Applications.mp3 |
| UNIT_23/Unit_23_01_Objectives.mp3 |
| UNIT_08/Unit_08_02_Safety Checklist.mp3 |
| UNIT_24/Unit_24_15_The Cross Vapor Charge Bulb.mp3 |
| UNIT_14/Unit_14_09_Sensing Temperature in an Airstream.mp3 |
| UNIT_18/Unit_18_01_Objectives.mp3 |
| UNIT_22/Unit_22_02_Safety Checklist.mp3 |
| UNIT_05/Unit_05_08_Summary.mp3 |
| UNIT_31/Unit_31_13_Manifold.mp3 |
| UNIT_25/Unit_26_29_Low-Temperature Evaporator Design.mp3 |
| UNIT_48/Unit_48_18_Metering Devices for High-Pressure Chillers.mp3 |
| UNIT_14/Unit_14_10_Things to Remember About Sensing Devices.mp3 |
| UNIT_29/Unit_29_12_Six Typical Problems.mp3 |
| UNIT_36/Unit_36_19_The Condenser.mp3 |
| UNIT_20/Unit_20_01_Objectives.mp3 |
| UNIT_25/Unit_26_33_Refrigeration Accessories.mp3 |
| UNIT_48/Unit_48_26_Metering Devices for Low-Pressure Chillers.mp3 |
| UNIT_03/Unit_03_08_Refrigeration Components.mp3 |
| UNIT_16/Unit_16_01_Objectives.mp3 |
| UNIT_37/Unit_37_20_Spiral Metal Duct.mp3 |
| UNIT_25/Unit_26_45_Refrigeration Line Service Valves.mp3 |
| UNIT_34/Unit_34_02_Safety Checklist.mp3 |
| UNIT_28/Unit_29_03_Special Application Refrigeration.mp3 |
| UNIT_17/Unit_17_12_The Electronic Relay.mp3 |
| UNIT_31/Unit_31_14_Orifice.mp3 |
| UNIT_30/Unit_30_02_Safety Checklist.mp3 |
| UNIT_19/Unit_19_09_Inherent Motor Protection.mp3 |
| UNIT_40/Unit_40_04_Relative Humidity and the Load.mp3 |
| UNIT_24/Unit_24_07_The Diaphragm.mp3 |
| UNIT_37/Unit_37_02_Safety Checklist.mp3 |
| UNIT_24/Unit_24_11_Types of Bulb Charge.mp3 |
| UNIT_26/Unit_26_23_Walk-In Cooler Doors.mp3 |
| UNIT_25/Unit_25_04_Mechanical Controls.mp3 |
| UNIT_45/Unit_45_18_Lights.mp3 |
| UNIT_34/Unit_34_05_Controlling Indoor Air Contamination.mp3 |
| UNIT_12/Unit_12_06_Insulators.mp3 |
| UNIT_26/Unit_26_21_Walk-In Refrigeration.mp3 |
| UNIT_05/Unit_05_01_Objectives.mp3 |
| UNIT_24/Unit_24_05_TXV Components.mp3 |
| UNIT_21/Unit_21_02_Safety Checklist.mp3 |
| UNIT_18/Unit_18_02_Safety Checklist.mp3 |
| UNIT_25/Unit_26_25_Defrost Cycle.mp3 |
| UNIT_42/Unit_42_02_Safety Checklist.mp3 |
| UNIT_09/Unit_09_00_Refrig and Oil Chem and Management - Recovery, Recycling, Reclaiming and Retrofitting.mp3 |
| UNIT_16/Unit_16_00_Advanced Automatic Controls - Direct Digital Controls (DDCs) and Pneumatics.mp3 |
| UNIT_50/Unit_50_00_Operation, Maintenance, and Troubleshooting of Chilled-Water Air-Conditioning Systems.mp3 |
| UNIT_48/Unit_48_00_High-Pressure, Low-Pressure, and Absorption Chilled-Water Systems.mp3 |
| UNIT_29/Unit_29_00_Troubleshooting and Typical Operation Conditions for Commercial Refrig.mp3 |
| UNIT_24/Unit_24_02_Safety Checklist.mp3 |
| UNIT_14/Unit_14_00_Automatic Control Components and Applications.mp3 |
| UNIT_36/Unit_36_00_Refrigeration Applied to Air Conditioning.mp3 |
| UNIT_42/Unit_42_00_Electric, Gas, and Oil Heat with Electric Air Conditioning.mp3 |
| UNIT_13/Unit_13_00_Introduction to Automatic Controls.mp3 |
| UNIT_26/Unit_26_00_Application of Refrigeration Systems.mp3 |
| UNIT_15/Unit_15_00_Troubleshooting Basic Controls.mp3 |
| UNIT_12/Unit_12_00_Basic Electricity and Magnetism.mp3 |
| UNIT_11/Unit_11_00_Calibrating Instruments.mp3 |
| UNIT_21/Unit_21_00_Evaporators and the Refrigeration System.mp3 |
| UNIT_45/Unit_45_00_Domestic Refrigerators.mp3 |
| UNIT_35/Unit_35_00_Comfort and Psychrometrics.mp3 |
| UNIT_46/Unit_46_00_Domestic Freezers.mp3 |
| UNIT_28/Unit_28_00_Special Refrigeration Applications.mp3 |
| UNIT_25/Unit_25_00_Special Refrigeration System Components.mp3 |
| UNIT_03/Unit_03_00_Refrigeration and Refrigerants.mp3 |
| UNIT_20/Unit_20_00_Troubleshooting Electric Motors.mp3 |
| UNIT_44/Unit_44_00_Geothermal Heat Pumps.mp3 |
| UNIT_43/Unit_43_00_Air Source Heat Pumps.mp3 |
| UNIT_27/Unit_27_00_Commercial Ice Machines.mp3 |
| UNIT_02/Unit_02_00_Matter and Energy.mp3 |
| UNIT_08/Unit_08_00_System Evacuation.mp3 |
| UNIT_10/Unit_10_00_System Charging.mp3 |
| UNIT_05/Unit_05_00_Tools and Equipment.mp3 |
| UNIT_07/Unit_07_00_Tubing and Piping.mp3 |
| UNIT_18/Unit_18_00_Application of Motors.mp3 |
| UNIT_04/Unit_04_00_General Safety Practices.mp3 |
| UNIT_49/Unit_49_00_Cooling Towers and Pumps.mp3 |
| UNIT_34/Unit_34_00_Indoor Air Quality.mp3 |
| UNIT_47/Unit_47_00_Room Air Conditioners.mp3 |
| UNIT_19/Unit_19_00_Motor Controls.mp3 |
| UNIT_33/Unit_33_00_Hydronic Heat.mp3 |
| UNIT_37/Unit_37_00_Air Distribution and Balance.mp3 |
| UNIT_24/Unit_24_00_Expansion Devices.mp3 |
| UNIT_01/Unit_01_00_Heat and Pressure.mp3 |
| UNIT_17/Unit_17_00_Types of Electric Motors.mp3 |
| UNIT_31/Unit_31_00_Gas Heat.mp3 |
| UNIT_06/Unit_06_00_Fasteners.mp3 |
| UNIT_38/Unit_38_00_Installation.mp3 |
| UNIT_40/Unit_40_00_Typical Operating Conditions.mp3 |
| UNIT_23/Unit_23_00_Compressors.mp3 |
| UNIT_22/Unit_22_00_Condensers.mp3 |
| UNIT_30/Unit_30_00_Electric Heat.mp3 |
| UNIT_41/Unit_41_00_Troubleshooting.mp3 |
| UNIT_39/Unit_39_00_Controls.mp3 |
| UNIT_32/Unit_32_00_Oil Heat.mp3 |
| !readme.txt |
| Torrent downloaded from Demonoid.me.txt |
| http://inferno.demonoid.me:3407/announce |
TorrentBank
Copyright © 2024