Mill 2D Course - TorrentBank

File Name:Mill 2D Course

Create Tool:

Create Time:2017-02-20 02:38:33

File Size:3.58 GB

File Count:190

File Hash:8fc7d8945ad3017a246ac294f1a059b2b424f13f

Magnet Link:

Magnet Link:

Torrent File:

Torrent will be cached successfully within 30 seconds, please try again later!

Lesson 8A/1 - High speed toolpaths.mp4 165.14 MB
Mill Advanced 4/1 - Task 1 - Remove Chamfers.mp4 84.32 MB
Lesson 7/10 - CNC.mp4 80.06 MB
Lesson 1/2 - Interface - Menu Bar.mp4 79.93 MB
Mill Advanced 3/4 - Task 4 - Solid Position.mp4 69.14 MB
Mill Advanced 4/4 - Task 4 - Modify Undercuts.mp4 68.52 MB
WCS 2/1 - WCS Lesson 2 - View Manager.mp4 65.31 MB
Lesson 3/6 - Using Stock Setup.mp4 59.50 MB
Mill Advanced 1/3 - Task 3 - Fixture Import.mp4 58.65 MB
WCS 1/1 - WCS Part 1 - Construction Planes.mp4 54.67 MB
WCS 4/1 - WCS 4 - Work Offsets.mp4 53.45 MB
Lesson 7/11 - Exercise 2.mp4 53.18 MB
Mill Advanced 1/4 - Task 4 - 2D Dynamic Mill.mp4 49.87 MB
Lesson 2/2 - Creating Lines.mp4 43.04 MB
Lesson 3/2 - Creating Arcs and Circles.mp4 42.71 MB
FBM 1/3 - Task 5 to 6.mp4 42.34 MB
Lesson 3/4 - Using Transform.mp4 41.56 MB
Lesson 7B/1 - Lesson Introduction.mp4 40.89 MB
Mill Advanced 4/3 - Task 3 - Slot Modification.mp4 38.58 MB
Lesson 5/10 - Depth Cut and Multi Passes.mp4 37.87 MB
Lesson 7B/8 - Task 5.mp4 36.52 MB
Lesson 8A/13 - Task 23.mp4 36.42 MB
Lesson 8A/12 - Task 22.mp4 35.70 MB
Mill Advanced 3/3 - Task 3 - Machining with Mill.mp4 34.70 MB
Mill Advanced 2/1 - Task 1 - Part Setup.mp4 34.62 MB
Lesson 4/7 - Backplot and Verify.mp4 34.56 MB
Lesson 8B/12 - Task 22 to 23.mp4 33.75 MB
Lesson 8B/13 - Task 24 to 25.mp4 32.63 MB
Lesson 2/4 - Getting Help.mp4 31.98 MB
Lesson 8B/14 - Task 26 to 29.mp4 31.89 MB
Mill Advanced 1/1 - Task 1 - Part Setup.mp4 31.79 MB
Lesson 1/4 - Task 1 to 3.mp4 31.18 MB
Lesson 5/8 - Task 15 to 18.mp4 30.76 MB
Lesson 1/3 - Coordinate System.mp4 29.74 MB
Lesson 7/9 - Task 13 to 16.mp4 29.39 MB
Lesson 5/7 - Task 13 to 14.mp4 28.95 MB
Lesson 5/6 - Task 11 to 12.mp4 28.77 MB
Lesson 8B/3 - Task 3 to 5.mp4 27.90 MB
Lesson 8A/3 - Task 3 to 5.mp4 27.90 MB
FBM 2/3 - Task 5 to 6.mp4 27.82 MB
Lesson 7B/3 - Task 1 to 2 Inventor.mp4 27.07 MB
Mill Advanced 2/5 - Task 5 - Machine Side.mp4 26.45 MB
Lesson 7/5 - Task 6 to 7.mp4 26.37 MB
Lesson 5/9 - Trim and Extend.mp4 26.19 MB
Lesson 8A/9 - Task 15 to 18.mp4 26.14 MB
Lesson 8B/9 - Task 15 to 18.mp4 26.14 MB
Lesson 5/11 - CNC.mp4 25.71 MB
Lesson 7/7 - Task 10 to 11.mp4 25.65 MB
Lesson 8B/11 - Task 19 to 21.mp4 25.64 MB
Lesson 8A/11 - Task 19 to 21.mp4 25.64 MB
Lesson 3/9 - Task 11 to 14.mp4 25.38 MB
Mill Advanced 1/2 - Task 2 - Stock Setup.mp4 25.01 MB
Lesson 8A/7 - Task 11 to 12.mp4 24.94 MB
Lesson 8B/7 - Task 11 to 12.mp4 24.94 MB
Lesson 8A/8 - Task 13 to 14.mp4 24.83 MB
Lesson 8B/8 - Task 13 to 14.mp4 24.83 MB
WCS 3/1 - WCS 3 - Moving the WCS.mp4 24.63 MB
Mill Advanced 1/6 - Task 6 - Toolpath Simulation.mp4 24.23 MB
Lesson 3/7 - Task 8 to 9.mp4 23.96 MB
Lesson 8A/16 - Task 26.mp4 23.86 MB
Mill Advanced 2/4 - Task 4 - Create Planes.mp4 23.85 MB
FBM 2/2 - Task 1 to 4.mp4 22.76 MB
Lesson 4/3 - Task 6 to 7.mp4 22.75 MB
Lesson 4/4 - Task 8 to 9.mp4 22.45 MB
Lesson 2/3 - Task 1 to 4.mp4 22.38 MB
Lesson 8A/19 - Task 30 to 31.mp4 22.00 MB
Lesson 4/2 - Task 1 to 5.mp4 21.92 MB
Mill Advanced 3/2 - Task 2 - Machining with Lathe.mp4 21.78 MB
Lesson 7/2 - Task 1 to 3.mp4 20.39 MB
FBM 2/4 - Task 7.mp4 20.20 MB
Lesson 7/6 - Task 8 to 9.mp4 19.66 MB
FBM 1/4 - Task 7 to 8.mp4 19.60 MB
Lesson 8B/1 - Lesson Introduction.mp4 19.42 MB
Lesson 8A/17 - Task 27.mp4 19.32 MB
Mill Advanced 1/5 - Task 5 - Face.mp4 19.14 MB
Lesson 7B/17 - Task 14.mp4 19.09 MB
Lesson 8B/2 - Task 1 to 2.mp4 19.05 MB
Lesson 8A/2 - Task 1 to 2.mp4 19.05 MB
WCS 5/1 - WCS 5 -Dynamic Planes.mp4 18.94 MB
Lesson 7/1 - Lesson Introduction.mp4 18.42 MB
Lesson 8A/14 - Task 24.mp4 17.95 MB
Lesson 7B/15 - Task 12.mp4 17.93 MB
Lesson 3/3 - Task 1 to 3.mp4 17.87 MB
Lesson 6/3 - Taks 5 to 6.mp4 17.84 MB
Lesson 5/2 - Task 1 to 6.mp4 17.72 MB
Lesson 4/6 - Task 11 to 13.mp4 17.68 MB
Lesson 7/3 - Task 4.mp4 17.39 MB
FBM 1/5 - Task 9 to 11.mp4 17.21 MB
Lesson 2/5 - Task 5 to 6.mp4 17.06 MB
Lesson 7/4 - Task 5.mp4 16.69 MB
FBM 1/2 - Task 1 to 4.mp4 16.44 MB
Lesson 7/8 - Task 12.mp4 16.37 MB
Lesson 8A/10 - CNC1.mp4 16.26 MB
Lesson 8B/10 - CNC1.mp4 16.26 MB
Lesson 8A/6 - Task 9 to 10.mp4 16.16 MB
Lesson 8B/6 - Task 9 to 10.mp4 16.16 MB
Lesson 6/4 - Task 7.mp4 16.10 MB
Lesson 6/2 - Task 1 to 4.mp4 16.08 MB
Mill Advanced 4/2 - Task 2 - Remove Bosses.mp4 15.09 MB
Lesson 8A/15 - Task 25.mp4 14.99 MB
Lesson 7B/10 - Task 7.mp4 14.97 MB
Mill Advanced 4/5 - Task 5 - Fix Fillet.mp4 14.88 MB
Mill Advanced 3/1 - Task 1 - Solid disassemble.mp4 14.75 MB
Lesson 8A/4 - Task 6 to 7.mp4 14.62 MB
Lesson 8B/4 - Task 6 to 7.mp4 14.62 MB
Lesson 7B/4 - Task 1 to 2 Creo.mp4 14.37 MB
FBM 2/5 - Task 8 to 10.mp4 14.30 MB
Lesson 3/5 - Task 4 to 7.mp4 14.23 MB
Lesson 6/6 - Task 9 to 10.mp4 14.14 MB
Lesson 7B/7 - Task 4.mp4 14.03 MB
Lesson 3/8 - Task 10.mp4 13.81 MB
Lesson 7B/2 - Task 1 to 2 Solidworks.mp4 13.62 MB
Lesson 7B/5 - Task 3 Solidworks.mp4 13.58 MB
Lesson 7B/16 - Task 13.mp4 13.16 MB
Mill Advanced 2/3 - Task 3 - Set STL as Stock.mp4 12.79 MB
Lesson 7B/9 - Task 6.mp4 12.66 MB
Mill Advanced 2/2 - Task 2 - View Sheets.mp4 12.38 MB
Lesson 4/8 - CNC.mp4 12.20 MB
Mill Advanced 2/6 - Task 6 - Simulation.mp4 12.02 MB
Lesson 8A/18 - Task 28 to 29.mp4 11.98 MB
Lesson 6/5 - Task 8.mp4 11.92 MB
Lesson 7B/12 - Task 9.mp4 11.88 MB
Lesson 7B/18 - Task 15 to 16.mp4 11.48 MB
Lesson 4/5 - Task 10.mp4 11.33 MB
Lesson 4/1 - Lesson Introduction.mp4 11.28 MB
Lesson 3/1 - Lesson Introduction.mp4 11.06 MB
Lesson 2/6 - Task 7 to 8.mp4 10.91 MB
Lesson 7B/11 - Task 8.mp4 10.32 MB
Lesson 5/4 - Task 8.mp4 10.08 MB
Lesson 7B/13 - Task 10.mp4 9.57 MB
Lesson 5/3 - Task 7.mp4 9.51 MB
Lesson 7B/14 - Task 11.mp4 9.51 MB
FBM 1/1 - FMB Introduction.mp4 9.30 MB
Lesson 7B/6 - Task 3 Inventor_Creo.mp4 9.29 MB
Lesson 5/1 - Lesson Introduction.mp4 8.20 MB
Lesson 3/10 - CNC.mp4 7.67 MB
FBM 2/MILL-LESSON-FBM-2.mcam 7.55 MB
Lesson 3/11 - Troubles with Exercise 1.mp4 7.10 MB
Lesson 5/5 - Task 9 to 10.mp4 6.88 MB
Lesson 1/1 - Lesson Introduction.mp4 5.98 MB
Mill Advanced 2/7 - Task 7 - Post NC Code.mp4 5.93 MB
Mill Advanced 1/Mill Advanced 2017 - 1.pdf 5.41 MB
FBM 2/1 - Lesson Introduction.mp4 5.24 MB
Lesson 8A/Mill-Lesson-8HST.pdf 4.86 MB
Lesson 2/1 - Lesson Introduction.mp4 3.89 MB
Lesson 7B/Mill-Lesson-7B.pdf 3.83 MB
Lesson 8A/5 - Task 8.mp4 3.83 MB
Lesson 8B/5 - Task 8.mp4 3.83 MB
Lesson 8B/Mill-Lesson-8Classic.pdf 3.72 MB
Lesson 6/1 - Lesson Introduction.mp4 3.65 MB
Lesson 7/Mill-Lesson-7.pdf 3.56 MB
Mill Advanced 4/Mill Advanced 2017 - 4 .pdf 3.24 MB
Lesson 5/Mill-Lesson-5.pdf 2.67 MB
Mill Advanced 2/Mill Advanced 2017 - 2 .pdf 2.53 MB
Lesson 3/Mill-Lesson-3.pdf 1.81 MB
Mill Advanced 3/Mill Advanced 2017 - 3 .pdf 1.72 MB
Lesson 4/Mill-Lesson-4.pdf 1.69 MB
FBM 2/Mill-Lesson-FBM-2.pdf 1.67 MB
Mill Advanced 2/MillAdv2.mcam 1.65 MB
FBM 1/Mill-Lesson-FBM-1.pdf 1.44 MB
Mill Advanced 3/Vise.mcam 1.31 MB
Lesson 6/Mill-Lesson-6.pdf 1.06 MB
WCS 2/Mill-Lesson-WCS-Part-2.pdf 975 KB
WCS 4/Mill-Lesson-WCS-Part-4.pdf 865 KB
Lesson 1/Setting-The-Environment.pdf 770 KB
Lesson 2/Mill-Lesson-2.pdf 712 KB
WCS 4/WCS-PART-4-DONE.mcam 710 KB
WCS 3/Mill-Lesson-WCS-Part-3.pdf 653 KB
WCS 4/WCS-PART-4.mcam 649 KB
WCS 1/Mill-Lesson-WCS-Part-1.pdf 546 KB
Mill Advanced 1/Vise.x_t 531 KB
FBM 1/MILL-LESSON-FBM-1.mcam 510 KB
FBM 2/MILL-LESSON-FBM-2.stl 476 KB
WCS 3/WCS-PART-3-DONE.mcam 460 KB
WCS 2/WCS-PART-2-DONE.mcam 457 KB
Lesson 7B/Mill-Lesson-7B-Exercise-B-Solid-Model.mcam 443 KB
Lesson 1/Mill-Lesson-1.pdf 441 KB
WCS 2/WCS-PART-2.mcam 406 KB
WCS 3/WCS-PART-3.mcam 405 KB
Mill Advanced 4/BRACKET.X_B 381 KB
Lesson 7B/Mill-Lesson-7.prt 359 KB
WCS 1/WCS1.mcam 312 KB
Lesson 7B/Mill-Lesson-7.ipt 171 KB
Lesson 7B/Mill-Lesson-7.SLDPRT 170 KB
FBM 2/MILL-LESSON-FBM-2.X_T 156 KB
Mill Advanced 1/MillAdv1.SLDPRT 154 KB
Mill Advanced 2/Op1 - Finished.stl 41 KB
WCS 4/WCS-PART-4.NC 8 KB
WCS 2/WCS-PART-2.NC 4 KB
WCS 3/WCS-PART-3.NC 1 KB
udp://tracker.opentrackr.org:1337/announce

TorrentBank
Copyright © 2024