Create Tool:
Create Time:1970-01-01 08:00:00
File Size:4.30 GB
File Count:522
File Hash:45acb766f58bd39a692fd9cb29f46ac5d050e6e0
| 1. Notes and Information/1. Important Note.html | 1.23 KB |
| 1. Notes and Information/2. Source Code.html | 312 B |
| 1. Notes and Information/3. Rating and Review.html | 792 B |
| 10. Understanding MCU Clocks and Details/1. Understanding MCU Clocking SystemPart1.mp4 | 44.67 MB |
| 10. Understanding MCU Clocks and Details/1. Understanding MCU Clocking SystemPart1.vtt | 5.94 KB |
| 10. Understanding MCU Clocks and Details/2. Understanding MCU Clocking System Part2.mp4 | 91.20 MB |
| 10. Understanding MCU Clocks and Details/2. Understanding MCU Clocking System Part2.vtt | 12.20 KB |
| 10. Understanding MCU Clocks and Details/3. Exercise-Using HSI Clock and Clock MeasurementPart 1.mp4 | 45.86 MB |
| 10. Understanding MCU Clocks and Details/3. Exercise-Using HSI Clock and Clock MeasurementPart 1.vtt | 14.93 KB |
| 10. Understanding MCU Clocks and Details/4. Exercise-Using HSI Clock and Clock Measurement Part 2.mp4 | 41.11 MB |
| 10. Understanding MCU Clocks and Details/4. Exercise-Using HSI Clock and Clock Measurement Part 2.vtt | 5.03 KB |
| 11. Understanding MCU Peripheral Clock Control/1. Understanding MCU Peripheral Clock control.mp4 | 16.67 MB |
| 11. Understanding MCU Peripheral Clock Control/1. Understanding MCU Peripheral Clock control.vtt | 4.75 KB |
| 11. Understanding MCU Peripheral Clock Control/2. Exercise EnablingDisabling Peripheral Clock.mp4 | 34.91 MB |
| 11. Understanding MCU Peripheral Clock Control/2. Exercise EnablingDisabling Peripheral Clock.vtt | 15.01 KB |
| 11. Understanding MCU Peripheral Clock Control/3. Exercise-Making HSE as System Clock.mp4 | 72.83 MB |
| 11. Understanding MCU Peripheral Clock Control/3. Exercise-Making HSE as System Clock.vtt | 9.50 KB |
| 11. Understanding MCU Peripheral Clock Control/4. Exercise-Making HSE as System Clock Contd..mp4 | 56.92 MB |
| 11. Understanding MCU Peripheral Clock Control/4. Exercise-Making HSE as System Clock Contd..vtt | 5.31 KB |
| 12. Understanding MCU Vector table/1. Understanding MCU Vector Table Part-1.mp4 | 39.57 MB |
| 12. Understanding MCU Vector table/1. Understanding MCU Vector Table Part-1.vtt | 16.31 KB |
| 12. Understanding MCU Vector table/2. Understanding MCU Vector Table Part-2.mp4 | 37.29 MB |
| 12. Understanding MCU Vector table/2. Understanding MCU Vector Table Part-2.vtt | 5.24 KB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/1. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1.mp4 | 35.94 MB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/1. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1.vtt | 9.68 KB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/2. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2.mp4 | 142.22 MB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/2. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2.vtt | 15.28 KB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/3. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3.mp4 | 18.34 MB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/3. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3.vtt | 5.38 KB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/4. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 4.mp4 | 14.98 MB |
| 13. Understanding MCU interrupt Design , NVIC, Interrupt handling/4. Understanding MCU interrupt Design , NVIC, Interrupt handling Part 4.vtt | 8.59 KB |
| 14. Understanding MCU Specific Header file/1. Understanding MCU Specific header file Part 1.mp4 | 89.19 MB |
| 14. Understanding MCU Specific Header file/1. Understanding MCU Specific header file Part 1.vtt | 16.97 KB |
| 14. Understanding MCU Specific Header file/2. Understanding MCU Specific header file Part 2.mp4 | 154.43 MB |
| 14. Understanding MCU Specific Header file/2. Understanding MCU Specific header file Part 2.vtt | 13.60 KB |
| 15. Importance of Volatile Keyword/1. Importance of Volatile Keyword Part-1.mp4 | 27.09 MB |
| 15. Importance of Volatile Keyword/1. Importance of Volatile Keyword Part-1.vtt | 11.50 KB |
| 15. Importance of Volatile Keyword/2. Importance of Volatile Keyword-Part 2.mp4 | 21.90 MB |
| 15. Importance of Volatile Keyword/2. Importance of Volatile Keyword-Part 2.vtt | 8.79 KB |
| 16. GPIO Must know concepts/1. GPIO pin and GPIO port.mp4 | 5.37 MB |
| 16. GPIO Must know concepts/1. GPIO pin and GPIO port.vtt | 1.76 KB |
| 16. GPIO Must know concepts/2. GPIO behind the scene.mp4 | 5.95 MB |
| 16. GPIO Must know concepts/2. GPIO behind the scene.vtt | 2.74 KB |
| 16. GPIO Must know concepts/3. GPIO input mode with high impedance state.mp4 | 2.90 MB |
| 16. GPIO Must know concepts/3. GPIO input mode with high impedance state.vtt | 1.14 KB |
| 16. GPIO Must know concepts/4. GPIO input mode with pull-updown state.mp4 | 2.78 MB |
| 16. GPIO Must know concepts/4. GPIO input mode with pull-updown state.vtt | 1.23 KB |
| 16. GPIO Must know concepts/5. GPIO output mode with open drain state.mp4 | 11.39 MB |
| 16. GPIO Must know concepts/5. GPIO output mode with open drain state.vtt | 5.58 KB |
| 16. GPIO Must know concepts/6. GPIO output mode with push pull state.mp4 | 5.75 MB |
| 16. GPIO Must know concepts/6. GPIO output mode with push pull state.vtt | 2.72 KB |
| 16. GPIO Must know concepts/7. Optimizing IO power consumption.mp4 | 6.87 MB |
| 16. GPIO Must know concepts/7. Optimizing IO power consumption.vtt | 2.99 KB |
| 17. GPIO Programming structure and Registers/1. GPIO programming structure.mp4 | 8.15 MB |
| 17. GPIO Programming structure and Registers/1. GPIO programming structure.vtt | 2.20 KB |
| 17. GPIO Programming structure and Registers/10. GPIO alternate function register(used to set alternate functionality for a pin ).mp4 | 9.42 MB |
| 17. GPIO Programming structure and Registers/10. GPIO alternate function register(used to set alternate functionality for a pin ).vtt | 2.91 KB |
| 17. GPIO Programming structure and Registers/11. Find Out IO Alt Functionality.html | 166 B |
| 17. GPIO Programming structure and Registers/2. Exploring GPIO PORT and pins of STM32F4xx Discovery board.mp4 | 2.49 MB |
| 17. GPIO Programming structure and Registers/2. Exploring GPIO PORT and pins of STM32F4xx Discovery board.vtt | 716 B |
| 17. GPIO Programming structure and Registers/3. GPIO Mode register(used to set mode for a pin).mp4 | 7.97 MB |
| 17. GPIO Programming structure and Registers/3. GPIO Mode register(used to set mode for a pin).vtt | 2.46 KB |
| 17. GPIO Programming structure and Registers/4. GPIO port output type register(used to specify op type).mp4 | 2.94 MB |
| 17. GPIO Programming structure and Registers/4. GPIO port output type register(used to specify op type).vtt | 1.24 KB |
| 17. GPIO Programming structure and Registers/5. GPIO port output speed register (how quick transition).mp4 | 7.37 MB |
| 17. GPIO Programming structure and Registers/5. GPIO port output speed register (how quick transition).vtt | 1.99 KB |
| 17. GPIO Programming structure and Registers/6. GPIO port pull-uppull-down register(used to activatedeactivate pull-ups).mp4 | 4.72 MB |
| 17. GPIO Programming structure and Registers/6. GPIO port pull-uppull-down register(used to activatedeactivate pull-ups).vtt | 1.27 KB |
| 17. GPIO Programming structure and Registers/7. GPIO port input data register (used to read from pin).mp4 | 2.61 MB |
| 17. GPIO Programming structure and Registers/7. GPIO port input data register (used to read from pin).vtt | 782 B |
| 17. GPIO Programming structure and Registers/8. GPIO port output data register(used to write to pin).mp4 | 2.75 MB |
| 17. GPIO Programming structure and Registers/8. GPIO port output data register(used to write to pin).vtt | 768 B |
| 17. GPIO Programming structure and Registers/9. Enabling and disabling GPIO peripheral clock.mp4 | 7.97 MB |
| 17. GPIO Programming structure and Registers/9. Enabling and disabling GPIO peripheral clock.vtt | 2.08 KB |
| 18. GPIO Driver Development Getting started/1. Overview of the driver development task.mp4 | 3.80 MB |
| 18. GPIO Driver Development Getting started/1. Overview of the driver development task.vtt | 1.30 KB |
| 18. GPIO Driver Development Getting started/2. Driver API Requirements.mp4 | 3.40 MB |
| 18. GPIO Driver Development Getting started/2. Driver API Requirements.vtt | 1.45 KB |
| 18. GPIO Driver Development Getting started/3. Creating Driver Template Project Eclipse.mp4 | 93.17 MB |
| 18. GPIO Driver Development Getting started/3. Creating Driver Template Project Eclipse.vtt | 10.14 KB |
| 18. GPIO Driver Development Getting started/4. Creating Driver Template Project KEIL.mp4 | 9.92 MB |
| 18. GPIO Driver Development Getting started/4. Creating Driver Template Project KEIL.vtt | 4.13 KB |
| 19. GPIO Driver Development Driver header file/1. Implementing Driver Header file.mp4 | 19.84 MB |
| 19. GPIO Driver Development Driver header file/1. Implementing Driver Header file.vtt | 4.85 KB |
| 2. Development based used in our course/1. Note for the students.html | 208 B |
| 2. Development based used in our course/2. About MCU Development board.mp4 | 50.57 MB |
| 2. Development based used in our course/2. About MCU Development board.vtt | 5.80 KB |
| 2. Development based used in our course/2.1 Discovery kit with STM32F407VG MCU.html | 120 B |
| 2. Development based used in our course/2.2 STM32 Nucleo-64 development board.html | 117 B |
| 2. Development based used in our course/3. STM32F4 Discovery and Nucleo Board Details.mp4 | 114.21 MB |
| 2. Development based used in our course/3. STM32F4 Discovery and Nucleo Board Details.vtt | 8.64 KB |
| 2. Development based used in our course/4. ST-Link Driver Installation.mp4 | 32.30 MB |
| 2. Development based used in our course/4. ST-Link Driver Installation.vtt | 3.16 KB |
| 2. Development based used in our course/4.1 ST-LINK, ST-LINKV2, ST-LINKV2-1 USB driver signed for Windows7, Windows8, Windows10.html | 117 B |
| 2. Development based used in our course/5. ST Link Firmware Upgrade.mp4 | 32.31 MB |
| 2. Development based used in our course/5. ST Link Firmware Upgrade.vtt | 4.41 KB |
| 2. Development based used in our course/5.1 ST-LINK, ST-LINKV2, ST-LINKV2-1 firmware upgrade.html | 117 B |
| 20. GPIO Driver Development Implementing Init API/1. Code to configure the mode.mp4 | 8.93 MB |
| 20. GPIO Driver Development Implementing Init API/1. Code to configure the mode.vtt | 2.36 KB |
| 20. GPIO Driver Development Implementing Init API/2. Code to configure GPIO speed and output type.mp4 | 3.87 MB |
| 20. GPIO Driver Development Implementing Init API/2. Code to configure GPIO speed and output type.vtt | 1.39 KB |
| 20. GPIO Driver Development Implementing Init API/3. Code to configure GPIO pull-uppull down.mp4 | 2.90 MB |
| 20. GPIO Driver Development Implementing Init API/3. Code to configure GPIO pull-uppull down.vtt | 1.95 KB |
| 20. GPIO Driver Development Implementing Init API/4. Configuring alternate function.mp4 | 6.52 MB |
| 20. GPIO Driver Development Implementing Init API/4. Configuring alternate function.vtt | 4.27 KB |
| 20. GPIO Driver Development Implementing Init API/5. Embedded Coding Skill.html | 166 B |
| 21. GPIO Driver Development Implementing ReadWrite APIs/1. Implementing GPIO Read API.mp4 | 3.59 MB |
| 21. GPIO Driver Development Implementing ReadWrite APIs/1. Implementing GPIO Read API.vtt | 2.09 KB |
| 21. GPIO Driver Development Implementing ReadWrite APIs/2. Implementing GPIO Write API.mp4 | 2.49 MB |
| 21. GPIO Driver Development Implementing ReadWrite APIs/2. Implementing GPIO Write API.vtt | 1.50 KB |
| 22. GPIO driver Code testingWriting Sample APP/1. Write init function to configure LED.mp4 | 9.31 MB |
| 22. GPIO driver Code testingWriting Sample APP/1. Write init function to configure LED.vtt | 6.46 KB |
| 22. GPIO driver Code testingWriting Sample APP/2. Code implementation to turn onofftoggle LED.mp4 | 3.94 MB |
| 22. GPIO driver Code testingWriting Sample APP/2. Code implementation to turn onofftoggle LED.vtt | 2.62 KB |
| 22. GPIO driver Code testingWriting Sample APP/3. Testing the sample Application on development board.mp4 | 2.74 MB |
| 22. GPIO driver Code testingWriting Sample APP/3. Testing the sample Application on development board.vtt | 2.21 KB |
| 22. GPIO driver Code testingWriting Sample APP/4. Testing LED behaviour on logic analyser software.mp4 | 6.34 MB |
| 22. GPIO driver Code testingWriting Sample APP/4. Testing LED behaviour on logic analyser software.vtt | 3.43 KB |
| 23. GPIO Interrupt Handling/1. Exploring How peripherals interrupts the processor via NVIC.mp4 | 19.71 MB |
| 23. GPIO Interrupt Handling/1. Exploring How peripherals interrupts the processor via NVIC.vtt | 12.95 KB |
| 23. GPIO Interrupt Handling/2. GPIO irq numbers.mp4 | 13.48 MB |
| 23. GPIO Interrupt Handling/2. GPIO irq numbers.vtt | 7.83 KB |
| 23. GPIO Interrupt Handling/3. Vector table and IRQ handlers.mp4 | 6.60 MB |
| 23. GPIO Interrupt Handling/3. Vector table and IRQ handlers.vtt | 3.15 KB |
| 23. GPIO Interrupt Handling/4. Adding interrupt handling apis to our driver.mp4 | 5.28 MB |
| 23. GPIO Interrupt Handling/4. Adding interrupt handling apis to our driver.vtt | 3.44 KB |
| 23. GPIO Interrupt Handling/5. Implementing APIs to Configure and Enable External Interrupts.mp4 | 14.53 MB |
| 23. GPIO Interrupt Handling/5. Implementing APIs to Configure and Enable External Interrupts.vtt | 7.58 KB |
| 23. GPIO Interrupt Handling/6. Clearing external interrupt (otherwise NVIC will keep getting kicked ).mp4 | 2.93 MB |
| 23. GPIO Interrupt Handling/6. Clearing external interrupt (otherwise NVIC will keep getting kicked ).vtt | 1.93 KB |
| 23. GPIO Interrupt Handling/7. Test interrupt APIs we developed by using button.mp4 | 8.18 MB |
| 23. GPIO Interrupt Handling/7. Test interrupt APIs we developed by using button.vtt | 4.62 KB |
| 23. GPIO Interrupt Handling/8. Find out IRQ number.html | 166 B |
| 23. GPIO Interrupt Handling/9. Interrupt Pending Bit.html | 166 B |
| 24. SPI Essentials (All about SPI)/1. Introduction to SPI.mp4 | 3.46 MB |
| 24. SPI Essentials (All about SPI)/1. Introduction to SPI.vtt | 1.51 KB |
| 24. SPI Essentials (All about SPI)/2. Understanding SPI protocol.mp4 | 17.05 MB |
| 24. SPI Essentials (All about SPI)/2. Understanding SPI protocol.vtt | 11.85 KB |
| 24. SPI Essentials (All about SPI)/3. SPI behind the scene.mp4 | 5.00 MB |
| 24. SPI Essentials (All about SPI)/3. SPI behind the scene.vtt | 3.59 KB |
| 25. What is phase , polarity and SPI modes/1. Significance of Polarity and Phase.mp4 | 11.41 MB |
| 25. What is phase , polarity and SPI modes/1. Significance of Polarity and Phase.vtt | 8.08 KB |
| 25. What is phase , polarity and SPI modes/2. Different SPI Modes with Timing diagram.mp4 | 7.78 MB |
| 25. What is phase , polarity and SPI modes/2. Different SPI Modes with Timing diagram.vtt | 5.35 KB |
| 25. What is phase , polarity and SPI modes/3. Uni-Directional and Bi-Directional SPI.mp4 | 8.07 MB |
| 25. What is phase , polarity and SPI modes/3. Uni-Directional and Bi-Directional SPI.vtt | 7.23 KB |
| 26. SPI Functional Block and Clock/1. Exploring SPI functional block(How SPI Engine works in MCU ).mp4 | 9.57 MB |
| 26. SPI Functional Block and Clock/1. Exploring SPI functional block(How SPI Engine works in MCU ).vtt | 4.91 KB |
| 26. SPI Functional Block and Clock/2. SPI Peripheral clock and Serial clock.mp4 | 12.86 MB |
| 26. SPI Functional Block and Clock/2. SPI Peripheral clock and Serial clock.vtt | 9.33 KB |
| 26. SPI Functional Block and Clock/3. Find out SPI Max Speed.html | 166 B |
| 27. SPI Important Registers/1. Exploring SPI Control Registers(CR).mp4 | 14.21 MB |
| 27. SPI Important Registers/1. Exploring SPI Control Registers(CR).vtt | 8.47 KB |
| 27. SPI Important Registers/2. Exploring SPI Data Registers(DR).mp4 | 4.37 MB |
| 27. SPI Important Registers/2. Exploring SPI Data Registers(DR).vtt | 2.88 KB |
| 27. SPI Important Registers/3. Exploring SPI Status Registers(SR).mp4 | 3.39 MB |
| 27. SPI Important Registers/3. Exploring SPI Status Registers(SR).vtt | 2.48 KB |
| 28. SPI Driver Development Getting started/1. Overview.mp4 | 3.56 MB |
| 28. SPI Driver Development Getting started/1. Overview.vtt | 3.02 KB |
| 28. SPI Driver Development Getting started/2. Driver API Requirements.mp4 | 2.52 MB |
| 28. SPI Driver Development Getting started/2. Driver API Requirements.vtt | 1.61 KB |
| 28. SPI Driver Development Getting started/3. Exploring different SPI Peripherals and pin packs of the MCU.mp4 | 2.35 MB |
| 28. SPI Driver Development Getting started/3. Exploring different SPI Peripherals and pin packs of the MCU.vtt | 1.80 KB |
| 29. SPI Driver Development Writing Driver header file/1. SPI Register Bit Definitions Macros(Converting register details in to Macros).mp4 | 9.23 MB |
| 29. SPI Driver Development Writing Driver header file/1. SPI Register Bit Definitions Macros(Converting register details in to Macros).vtt | 4.29 KB |
| 29. SPI Driver Development Writing Driver header file/2. SPI Data structures.mp4 | 17.97 MB |
| 29. SPI Driver Development Writing Driver header file/2. SPI Data structures.vtt | 9.78 KB |
| 29. SPI Driver Development Writing Driver header file/3. Driver exposed APIs to handle SPI.mp4 | 9.00 MB |
| 29. SPI Driver Development Writing Driver header file/3. Driver exposed APIs to handle SPI.vtt | 5.03 KB |
| 3. OpenSTM32 System Workbench installation/1. Note for the students.html | 468 B |
| 3. OpenSTM32 System Workbench installation/2. Downloading and Installing OpenSTM32 System-Workbench.mp4 | 69.08 MB |
| 3. OpenSTM32 System Workbench installation/2. Downloading and Installing OpenSTM32 System-Workbench.vtt | 5.50 KB |
| 3. OpenSTM32 System Workbench installation/3. Installing OpenSTM32 System-Workbench.mp4 | 21.56 MB |
| 3. OpenSTM32 System Workbench installation/3. Installing OpenSTM32 System-Workbench.vtt | 3.34 KB |
| 3. OpenSTM32 System Workbench installation/4. Note for the students.html | 345 B |
| 3. OpenSTM32 System Workbench installation/5. STM32CubeMX Installation.mp4 | 39.26 MB |
| 3. OpenSTM32 System Workbench installation/5. STM32CubeMX Installation.vtt | 4.28 KB |
| 30. SPI Driver Development Implementing init API/1. Writing init function and helper functions.mp4 | 4.93 MB |
| 30. SPI Driver Development Implementing init API/1. Writing init function and helper functions.vtt | 1.43 KB |
| 30. SPI Driver Development Implementing init API/2. Configuring mode, phase and polarity.mp4 | 3.78 MB |
| 30. SPI Driver Development Implementing init API/2. Configuring mode, phase and polarity.vtt | 2.90 KB |
| 30. SPI Driver Development Implementing init API/3. Configuring datasize, baudrate and direction.mp4 | 3.49 MB |
| 30. SPI Driver Development Implementing init API/3. Configuring datasize, baudrate and direction.vtt | 2.55 KB |
| 30. SPI Driver Development Implementing init API/4. Configuring NSS(Slave select pin ).mp4 | 10.78 MB |
| 30. SPI Driver Development Implementing init API/4. Configuring NSS(Slave select pin ).vtt | 7.13 KB |
| 30. SPI Driver Development Implementing init API/5. EnablingDisabling SPI Peripheral.mp4 | 3.31 MB |
| 30. SPI Driver Development Implementing init API/5. EnablingDisabling SPI Peripheral.vtt | 1.71 KB |
| 31. SPI Driver Development Implementing TXRX API/1. Implementing TX API for master.mp4 | 8.66 MB |
| 31. SPI Driver Development Implementing TXRX API/1. Implementing TX API for master.vtt | 5.11 KB |
| 31. SPI Driver Development Implementing TXRX API/2. Implementing RX API for master.mp4 | 5.31 MB |
| 31. SPI Driver Development Implementing TXRX API/2. Implementing RX API for master.vtt | 3.35 KB |
| 31. SPI Driver Development Implementing TXRX API/3. Implementing TX API for slave.mp4 | 6.75 MB |
| 31. SPI Driver Development Implementing TXRX API/3. Implementing TX API for slave.vtt | 4.44 KB |
| 31. SPI Driver Development Implementing TXRX API/4. Implementing RX API for slave.mp4 | 2.69 MB |
| 31. SPI Driver Development Implementing TXRX API/4. Implementing RX API for slave.vtt | 1.65 KB |
| 32. SPI MasterSlave Communication/1. How does SPI master TXRX data .mp4 | 16.97 MB |
| 32. SPI MasterSlave Communication/1. How does SPI master TXRX data .vtt | 13.84 KB |
| 32. SPI MasterSlave Communication/2. How does SPI slave TXRX data .mp4 | 8.76 MB |
| 32. SPI MasterSlave Communication/2. How does SPI slave TXRX data .vtt | 6.49 KB |
| 33. SPI Driver Development Implementing TX ISR/1. Understanding SPI TXRX IRQ numbers.mp4 | 13.67 MB |
| 33. SPI Driver Development Implementing TX ISR/1. Understanding SPI TXRX IRQ numbers.vtt | 7.14 KB |
| 33. SPI Driver Development Implementing TX ISR/2. Setting up TXERXNE interrupt.mp4 | 3.34 MB |
| 33. SPI Driver Development Implementing TX ISR/2. Setting up TXERXNE interrupt.vtt | 2.52 KB |
| 33. SPI Driver Development Implementing TX ISR/3. Writing SPI irq handler.mp4 | 6.23 MB |
| 33. SPI Driver Development Implementing TX ISR/3. Writing SPI irq handler.vtt | 4.55 KB |
| 33. SPI Driver Development Implementing TX ISR/4. Handling spi Tx interrupt.mp4 | 6.77 MB |
| 33. SPI Driver Development Implementing TX ISR/4. Handling spi Tx interrupt.vtt | 4.93 KB |
| 33. SPI Driver Development Implementing TX ISR/5. Quiz about Debugging SPI Interrupt.html | 166 B |
| 34. SPI Driver Development Implementing RX ISR/1. Handling RX done interrupt in ISR.mp4 | 3.52 MB |
| 34. SPI Driver Development Implementing RX ISR/1. Handling RX done interrupt in ISR.vtt | 1.78 KB |
| 35. Writing SPI sample application Getting Started/1. Understanding the Requirements.mp4 | 5.72 MB |
| 35. Writing SPI sample application Getting Started/1. Understanding the Requirements.vtt | 4.29 KB |
| 35. Writing SPI sample application Getting Started/2. Understanding connection diagram.mp4 | 4.74 MB |
| 35. Writing SPI sample application Getting Started/2. Understanding connection diagram.vtt | 1.95 KB |
| 36. Writing SPI sample application Master Code/1. Initialization.mp4 | 29.10 MB |
| 36. Writing SPI sample application Master Code/1. Initialization.vtt | 18.19 KB |
| 36. Writing SPI sample application Master Code/2. Defining various IRQ handlers.mp4 | 7.35 MB |
| 36. Writing SPI sample application Master Code/2. Defining various IRQ handlers.vtt | 3.98 KB |
| 36. Writing SPI sample application Master Code/3. Master write Sequences (send CMD, get ACK, send data).mp4 | 10.74 MB |
| 36. Writing SPI sample application Master Code/3. Master write Sequences (send CMD, get ACK, send data).vtt | 6.12 KB |
| 36. Writing SPI sample application Master Code/4. Master Receive Sequences(Send CMD, get ACK, get data).mp4 | 4.85 MB |
| 36. Writing SPI sample application Master Code/4. Master Receive Sequences(Send CMD, get ACK, get data).vtt | 2.54 KB |
| 37. Writing SPI sample application Slave Code Implementation/1. Initialization.mp4 | 2.62 MB |
| 37. Writing SPI sample application Slave Code Implementation/1. Initialization.vtt | 1.58 KB |
| 37. Writing SPI sample application Slave Code Implementation/2. Slave Handling ReadWrite command from master.mp4 | 12.37 MB |
| 37. Writing SPI sample application Slave Code Implementation/2. Slave Handling ReadWrite command from master.vtt | 6.24 KB |
| 38. Testing , Decoding and Debugging Tips/1. Initial testing on hardware.mp4 | 16.56 MB |
| 38. Testing , Decoding and Debugging Tips/1. Initial testing on hardware.vtt | 16.56 MB |
| 38. Testing , Decoding and Debugging Tips/2. Capture SPI transcation on Logic analyzer.mp4 | 10.76 MB |
| 38. Testing , Decoding and Debugging Tips/2. Capture SPI transcation on Logic analyzer.vtt | 5.32 KB |
| 38. Testing , Decoding and Debugging Tips/3. Decoding SPI transcation Using logic analyzer.mp4 | 8.06 MB |
| 38. Testing , Decoding and Debugging Tips/3. Decoding SPI transcation Using logic analyzer.vtt | 5.21 KB |
| 38. Testing , Decoding and Debugging Tips/4. Common problems in SPI and Debugging Tips.mp4 | 11.23 MB |
| 38. Testing , Decoding and Debugging Tips/4. Common problems in SPI and Debugging Tips.vtt | 11.71 KB |
| 39. I2C Essentials/1. Intro to I2C protocol.mp4 | 12.49 MB |
| 39. I2C Essentials/1. Intro to I2C protocol.vtt | 9.57 KB |
| 39. I2C Essentials/2. I2C Hardware Setup.mp4 | 5.35 MB |
| 39. I2C Essentials/2. I2C Hardware Setup.vtt | 4.24 KB |
| 39. I2C Essentials/3. Quiz SPI and I2C.html | 166 B |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/1. Note for the students.html | 309 B |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/2. KEIL-MDK-5 Installation.mp4 | 65.73 MB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/2. KEIL-MDK-5 Installation.vtt | 6.89 KB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/3. KEIL-MDK-5 Installation Contd..mp4 | 10.57 MB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/3. KEIL-MDK-5 Installation Contd..vtt | 2.35 KB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/4. KEIL-MDK-5 Pack Installation.mp4 | 58.83 MB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/4. KEIL-MDK-5 Pack Installation.vtt | 13.40 KB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/5. Locating Pack Installation files.mp4 | 8.62 MB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/5. Locating Pack Installation files.vtt | 3.22 KB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/6. Creating a KEIL Project.mp4 | 37.95 MB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/6. Creating a KEIL Project.vtt | 12.58 KB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/7. Understaning The Discovery Board.mp4 | 22.32 MB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/7. Understaning The Discovery Board.vtt | 1.54 KB |
| 4. KEIL-MDK-5 Setup For ARM Cortex M based MCUs/7.1 User Manual.html | 233 B |
| 40. I2C protocol in Detail/1. Basics.mp4 | 5.30 MB |
| 40. I2C protocol in Detail/1. Basics.vtt | 3.61 KB |
| 40. I2C protocol in Detail/2. Address phase.mp4 | 2.84 MB |
| 40. I2C protocol in Detail/2. Address phase.vtt | 1.83 KB |
| 40. I2C protocol in Detail/3. Start Condition.mp4 | 2.44 MB |
| 40. I2C protocol in Detail/3. Start Condition.vtt | 2.03 KB |
| 40. I2C protocol in Detail/4. ACKNACK.mp4 | 3.06 MB |
| 40. I2C protocol in Detail/4. ACKNACK.vtt | 1.76 KB |
| 40. I2C protocol in Detail/5. Stop Condition.mp4 | 2.04 MB |
| 40. I2C protocol in Detail/5. Stop Condition.vtt | 1.12 KB |
| 40. I2C protocol in Detail/6. Master ReadWrite Data Phase.mp4 | 5.91 MB |
| 40. I2C protocol in Detail/6. Master ReadWrite Data Phase.vtt | 4.13 KB |
| 40. I2C protocol in Detail/7. Repeated start (start with out a stop ).mp4 | 10.46 MB |
| 40. I2C protocol in Detail/7. Repeated start (start with out a stop ).vtt | 7.85 KB |
| 40. I2C protocol in Detail/8. Clock Stretching.mp4 | 8.70 MB |
| 40. I2C protocol in Detail/8. Clock Stretching.vtt | 5.31 KB |
| 41. I2C Operating Modes/1. I2C in fast mode and standard mode.mp4 | 3.93 MB |
| 41. I2C Operating Modes/1. I2C in fast mode and standard mode.vtt | 2.54 KB |
| 41. I2C Operating Modes/2. I2C duty cycle.mp4 | 11.46 MB |
| 41. I2C Operating Modes/2. I2C duty cycle.vtt | 6.20 KB |
| 42. I2C Addressing mode/1. 7bit addressing.mp4 | 3.44 MB |
| 42. I2C Addressing mode/1. 7bit addressing.vtt | 2.84 KB |
| 42. I2C Addressing mode/2. 10 bit addressing.mp4 | 3.18 MB |
| 42. I2C Addressing mode/2. 10 bit addressing.vtt | 2.26 KB |
| 43. I2C Functional block diagram and Clocks/1. Exploring I2C functional block in the MCU.mp4 | 6.32 MB |
| 43. I2C Functional block diagram and Clocks/1. Exploring I2C functional block in the MCU.vtt | 4.72 KB |
| 43. I2C Functional block diagram and Clocks/2. I2C peripheral clock and serial line clock(Fpclk and SCL).mp4 | 12.46 MB |
| 43. I2C Functional block diagram and Clocks/2. I2C peripheral clock and serial line clock(Fpclk and SCL).vtt | 7.01 KB |
| 44. I2C Interrupts/1. I2C IRQs and Interrupt Mapping.mp4 | 12.40 MB |
| 44. I2C Interrupts/1. I2C IRQs and Interrupt Mapping.vtt | 9.34 KB |
| 44. I2C Interrupts/2. Exploring I2C IRQ numbers.mp4 | 5.94 MB |
| 44. I2C Interrupts/2. Exploring I2C IRQ numbers.vtt | 3.34 KB |
| 45. I2C Peripheral Registers/1. Exploring I2C Control Registers(CR).mp4 | 17.10 MB |
| 45. I2C Peripheral Registers/1. Exploring I2C Control Registers(CR).vtt | 9.50 KB |
| 45. I2C Peripheral Registers/2. Exploring I2C Own Address Registers(OAR).mp4 | 2.48 MB |
| 45. I2C Peripheral Registers/2. Exploring I2C Own Address Registers(OAR).vtt | 2.12 KB |
| 45. I2C Peripheral Registers/3. Exploring I2C Data Register(DR).mp4 | 4.50 MB |
| 45. I2C Peripheral Registers/3. Exploring I2C Data Register(DR).vtt | 2.91 KB |
| 45. I2C Peripheral Registers/4. Exploring I2C Status Registers(SR).mp4 | 9.88 MB |
| 45. I2C Peripheral Registers/4. Exploring I2C Status Registers(SR).vtt | 7.94 KB |
| 45. I2C Peripheral Registers/5. Exploring I2C Clock Control Register(CCR).mp4 | 5.93 MB |
| 45. I2C Peripheral Registers/5. Exploring I2C Clock Control Register(CCR).vtt | 4.37 KB |
| 46. I2C MasterSlave Communication/1. How I2C Master TX data .mp4 | 10.89 MB |
| 46. I2C MasterSlave Communication/1. How I2C Master TX data .vtt | 8.56 KB |
| 46. I2C MasterSlave Communication/2. How I2C Master RX data .mp4 | 25.39 MB |
| 46. I2C MasterSlave Communication/2. How I2C Master RX data .vtt | 18.89 KB |
| 46. I2C MasterSlave Communication/3. How I2C Slave TX data .mp4 | 3.70 MB |
| 46. I2C MasterSlave Communication/3. How I2C Slave TX data .vtt | 2.48 KB |
| 46. I2C MasterSlave Communication/4. Quiz about I2C Master TX.html | 166 B |
| 46. I2C MasterSlave Communication/5. Quiz about I2C Master RX.html | 166 B |
| 47. I2C Driver Development Getting started/1. Overview.mp4 | 3.09 MB |
| 47. I2C Driver Development Getting started/1. Overview.vtt | 2.88 KB |
| 47. I2C Driver Development Getting started/2. Understanding the Requirements.mp4 | 1.60 MB |
| 47. I2C Driver Development Getting started/2. Understanding the Requirements.vtt | 1.33 KB |
| 47. I2C Driver Development Getting started/3. Exploring different I2C Peripherals and pins of the MCU.mp4 | 2.85 MB |
| 47. I2C Driver Development Getting started/3. Exploring different I2C Peripherals and pins of the MCU.vtt | 2.59 KB |
| 48. I2C Driver Development Driver header file/1. I2C Register Bit Definitions Macros.mp4 | 10.65 MB |
| 48. I2C Driver Development Driver header file/1. I2C Register Bit Definitions Macros.vtt | 4.53 KB |
| 48. I2C Driver Development Driver header file/2. I2C Data structures.mp4 | 16.23 MB |
| 48. I2C Driver Development Driver header file/2. I2C Data structures.vtt | 10.97 KB |
| 48. I2C Driver Development Driver header file/3. I2C Driver Exposed APIs.mp4 | 6.43 MB |
| 48. I2C Driver Development Driver header file/3. I2C Driver Exposed APIs.vtt | 3.49 KB |
| 49. I2C Driver Development Init Function/1. Init API and Helper Functions.mp4 | 2.91 MB |
| 49. I2C Driver Development Init Function/1. Init API and Helper Functions.vtt | 1.47 KB |
| 49. I2C Driver Development Init Function/2. Code Implementation to EnableDisable I2C peripheral.mp4 | 1.56 MB |
| 49. I2C Driver Development Init Function/2. Code Implementation to EnableDisable I2C peripheral.vtt | 963 B |
| 49. I2C Driver Development Init Function/3. Configure clock stretching , own address , auto ACKing.mp4 | 4.39 MB |
| 49. I2C Driver Development Init Function/3. Configure clock stretching , own address , auto ACKing.vtt | 2.68 KB |
| 49. I2C Driver Development Init Function/4. Configure I2C mode, addressing mode and duty cycle.mp4 | 5.14 MB |
| 49. I2C Driver Development Init Function/4. Configure I2C mode, addressing mode and duty cycle.vtt | 3.00 KB |
| 49. I2C Driver Development Init Function/5. Code to Initialize I2C Serial Clock.mp4 | 6.58 MB |
| 49. I2C Driver Development Init Function/5. Code to Initialize I2C Serial Clock.vtt | 4.76 KB |
| 49. I2C Driver Development Init Function/6. Code to Generate StartStop condition.mp4 | 2.85 MB |
| 49. I2C Driver Development Init Function/6. Code to Generate StartStop condition.vtt | 2.22 KB |
| 49. I2C Driver Development Init Function/7. EnablingDisabling Buff, Event, and Error interrupts.mp4 | 4.02 MB |
| 49. I2C Driver Development Init Function/7. EnablingDisabling Buff, Event, and Error interrupts.vtt | 2.43 KB |
| 49. I2C Driver Development Init Function/8. Other Helper Functions.mp4 | 5.56 MB |
| 49. I2C Driver Development Init Function/8. Other Helper Functions.vtt | 2.37 KB |
| 5. LEDButton Exercises using BSPs/1. Exercise LED Toggling App using Board BSP APIs.mp4 | 63.50 MB |
| 5. LEDButton Exercises using BSPs/1. Exercise LED Toggling App using Board BSP APIs.vtt | 19.43 KB |
| 5. LEDButton Exercises using BSPs/1.1 User_manual_STM32f407_Disc_kit.pdf.pdf | 1.16 MB |
| 5. LEDButton Exercises using BSPs/2. Exercise LED Toggling App using Board BSP APIs-Nucleo.mp4 | 17.41 MB |
| 5. LEDButton Exercises using BSPs/2. Exercise LED Toggling App using Board BSP APIs-Nucleo.vtt | 5.99 KB |
| 5. LEDButton Exercises using BSPs/2.1 STM32 Nucleo (64 pins) schematics.pdf.pdf | 1.70 MB |
| 5. LEDButton Exercises using BSPs/3. Exercise Adding button support using board BSP APIs(Nucleo).mp4 | 23.63 MB |
| 5. LEDButton Exercises using BSPs/3. Exercise Adding button support using board BSP APIs(Nucleo).vtt | 6.96 KB |
| 50. I2C Driver Developemnt Writing TXRX API/1. Implementing TX API for MASTER.mp4 | 8.89 MB |
| 50. I2C Driver Developemnt Writing TXRX API/1. Implementing TX API for MASTER.vtt | 4.77 KB |
| 50. I2C Driver Developemnt Writing TXRX API/2. Implementing RX API for MASTER.mp4 | 5.86 MB |
| 50. I2C Driver Developemnt Writing TXRX API/2. Implementing RX API for MASTER.vtt | 4.20 KB |
| 50. I2C Driver Developemnt Writing TXRX API/3. Implementing TX API for SLAVE.mp4 | 3.60 MB |
| 50. I2C Driver Developemnt Writing TXRX API/3. Implementing TX API for SLAVE.vtt | 2.53 KB |
| 50. I2C Driver Developemnt Writing TXRX API/4. Implementing RX API for SLAVE.mp4 | 2.63 MB |
| 50. I2C Driver Developemnt Writing TXRX API/4. Implementing RX API for SLAVE.vtt | 1.81 KB |
| 51. I2C Event Interrupt handling for master/1. Implementing event interrupt handler.mp4 | 4.13 MB |
| 51. I2C Event Interrupt handling for master/1. Implementing event interrupt handler.vtt | 3.15 KB |
| 51. I2C Event Interrupt handling for master/2. Handling of TXE event for master.mp4 | 2.44 MB |
| 51. I2C Event Interrupt handling for master/2. Handling of TXE event for master.vtt | 1.97 KB |
| 51. I2C Event Interrupt handling for master/3. Handling of TX BTF event for master.mp4 | 3.97 MB |
| 51. I2C Event Interrupt handling for master/3. Handling of TX BTF event for master.vtt | 2.39 KB |
| 52. I2C Event Interrupt handling for slave/1. Handling of slave Address Match Event.mp4 | 3.22 MB |
| 52. I2C Event Interrupt handling for slave/1. Handling of slave Address Match Event.vtt | 1.94 KB |
| 52. I2C Event Interrupt handling for slave/2. Handling of STOP detection event Interrupt.mp4 | 4.11 MB |
| 52. I2C Event Interrupt handling for slave/2. Handling of STOP detection event Interrupt.vtt | 3.01 KB |
| 52. I2C Event Interrupt handling for slave/3. Handling of TXE event Interrupt.mp4 | 4.91 MB |
| 52. I2C Event Interrupt handling for slave/3. Handling of TXE event Interrupt.vtt | 3.73 KB |
| 52. I2C Event Interrupt handling for slave/4. Handling of TX BTF event Interrupt.mp4 | 2.17 MB |
| 52. I2C Event Interrupt handling for slave/4. Handling of TX BTF event Interrupt.vtt | 1.16 KB |
| 52. I2C Event Interrupt handling for slave/5. Handling of RXNE and BTF event interrupt.mp4 | 4.04 MB |
| 52. I2C Event Interrupt handling for slave/5. Handling of RXNE and BTF event interrupt.vtt | 2.35 KB |
| 53. I2C Error Interrupt Handling/1. Writing Error interrupt handler.mp4 | 6.69 MB |
| 53. I2C Error Interrupt Handling/1. Writing Error interrupt handler.vtt | 3.82 KB |
| 53. I2C Error Interrupt Handling/2. Handling of Different I2C Errors.mp4 | 7.05 MB |
| 53. I2C Error Interrupt Handling/2. Handling of Different I2C Errors.vtt | 4.37 KB |
| 54. Writing I2C sample application Getting ready/1. Understanding the Requirements.mp4 | 4.84 MB |
| 54. Writing I2C sample application Getting ready/1. Understanding the Requirements.vtt | 4.08 KB |
| 54. Writing I2C sample application Getting ready/2. Understanding connection diagram.mp4 | 1.24 MB |
| 54. Writing I2C sample application Getting ready/2. Understanding connection diagram.vtt | 1020 B |
| 55. Writing I2C sample Application Master Code/1. I2C Initialization.mp4 | 24.11 MB |
| 55. Writing I2C sample Application Master Code/1. I2C Initialization.vtt | 14.67 KB |
| 55. Writing I2C sample Application Master Code/2. Implementing I2C IRQ Handlers.mp4 | 5.85 MB |
| 55. Writing I2C sample Application Master Code/2. Implementing I2C IRQ Handlers.vtt | 3.39 KB |
| 55. Writing I2C sample Application Master Code/3. Implementing master write Sequences(cmd,length,data).mp4 | 6.70 MB |
| 55. Writing I2C sample Application Master Code/3. Implementing master write Sequences(cmd,length,data).vtt | 3.63 KB |
| 55. Writing I2C sample Application Master Code/4. Implementing master read Sequences(cmd,length,data).mp4 | 5.10 MB |
| 55. Writing I2C sample Application Master Code/4. Implementing master read Sequences(cmd,length,data).vtt | 2.41 KB |
| 55. Writing I2C sample Application Master Code/5. Slave Handling ReadWrite Command from master.mp4 | 6.01 MB |
| 55. Writing I2C sample Application Master Code/5. Slave Handling ReadWrite Command from master.vtt | 3.05 KB |
| 56. Testing and Protocol Decoding using logic analyzer (lets get the trace )/1. Initial testing on hardware.mp4 | 19.76 MB |
| 56. Testing and Protocol Decoding using logic analyzer (lets get the trace )/1. Initial testing on hardware.vtt | 3.75 KB |
| 56. Testing and Protocol Decoding using logic analyzer (lets get the trace )/2. Decoding and Analyzing I2C transaction using logic analyzer.mp4 | 20.05 MB |
| 56. Testing and Protocol Decoding using logic analyzer (lets get the trace )/2. Decoding and Analyzing I2C transaction using logic analyzer.vtt | 12.63 KB |
| 56. Testing and Protocol Decoding using logic analyzer (lets get the trace )/3. Common Problems in I2C and Debugging Tips.mp4 | 7.01 MB |
| 56. Testing and Protocol Decoding using logic analyzer (lets get the trace )/3. Common Problems in I2C and Debugging Tips.vtt | 6.92 KB |
| 57. UART Essentials/1. Intro UART vs USART.mp4 | 7.05 MB |
| 57. UART Essentials/1. Intro UART vs USART.vtt | 4.82 KB |
| 57. UART Essentials/2. Understanding UART pins.mp4 | 5.71 MB |
| 57. UART Essentials/2. Understanding UART pins.vtt | 3.82 KB |
| 57. UART Essentials/3. UART frame formats.mp4 | 4.30 MB |
| 57. UART Essentials/3. UART frame formats.vtt | 2.81 KB |
| 57. UART Essentials/4. Baud Rate.mp4 | 5.14 MB |
| 57. UART Essentials/4. Baud Rate.vtt | 4.00 KB |
| 57. UART Essentials/5. Synchronization bits.mp4 | 4.08 MB |
| 57. UART Essentials/5. Synchronization bits.vtt | 2.27 KB |
| 57. UART Essentials/6. UART Parity.mp4 | 7.85 MB |
| 57. UART Essentials/6. UART Parity.vtt | 6.00 KB |
| 58. UART functional block and Peripheral Clock/1. Exploring UART functional block.mp4 | 8.14 MB |
| 58. UART functional block and Peripheral Clock/1. Exploring UART functional block.vtt | 4.41 KB |
| 58. UART functional block and Peripheral Clock/2. UART peripheral clock.mp4 | 7.22 MB |
| 58. UART functional block and Peripheral Clock/2. UART peripheral clock.vtt | 3.23 KB |
| 59. UART Communication/1. UART Transmitter.mp4 | 7.16 MB |
| 59. UART Communication/1. UART Transmitter.vtt | 5.33 KB |
| 59. UART Communication/2. Uart Receiver.mp4 | 10.11 MB |
| 59. UART Communication/2. Uart Receiver.vtt | 6.99 KB |
| 59. UART Communication/3. UART Start bit Detection.html | 166 B |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/1. Creating First project using OpenSTM32 System workbench LED Toggling App.mp4 | 100.21 MB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/1. Creating First project using OpenSTM32 System workbench LED Toggling App.vtt | 12.55 KB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/2. Writing LED Toggling Application ( For Nucleo).mp4 | 68.29 MB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/2. Writing LED Toggling Application ( For Nucleo).vtt | 5.66 KB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/3. Downloading and testing LED Toggling Application ( For Nucleo).mp4 | 24.45 MB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/3. Downloading and testing LED Toggling Application ( For Nucleo).vtt | 2.60 KB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/4. Writing LED Toggling Application ( For Discovery).mp4 | 73.69 MB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/4. Writing LED Toggling Application ( For Discovery).vtt | 6.17 KB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/5. Adding button support.mp4 | 94.96 MB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/5. Adding button support.vtt | 8.86 KB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/6. OpenSTM32 System Workbench Debugging.mp4 | 54.34 MB |
| 6. LEDButton Exercises with OpenSTM32 SystemWorkbench/6. OpenSTM32 System Workbench Debugging.vtt | 4.90 KB |
| 60. UART Interrupts/1. Exploring UART Interrupt Mapping.mp4 | 8.00 MB |
| 60. UART Interrupts/1. Exploring UART Interrupt Mapping.vtt | 5.54 KB |
| 61. UART Registers/1. Exploring UART Control Registers.mp4 | 12.42 MB |
| 61. UART Registers/1. Exploring UART Control Registers.vtt | 7.31 KB |
| 61. UART Registers/2. Exploring UART Data Registers.mp4 | 4.88 MB |
| 61. UART Registers/2. Exploring UART Data Registers.vtt | 2.86 KB |
| 61. UART Registers/3. Exploring UART Status Registers.mp4 | 9.43 MB |
| 61. UART Registers/3. Exploring UART Status Registers.vtt | 7.18 KB |
| 61. UART Registers/4. UART Baudrate Calculation.mp4 | 12.99 MB |
| 61. UART Registers/4. UART Baudrate Calculation.vtt | 9.83 KB |
| 61. UART Registers/5. Find out MAX baudrate of UART.html | 166 B |
| 62. UART Driver Development Getting Started/1. Overview.mp4 | 2.47 MB |
| 62. UART Driver Development Getting Started/1. Overview.vtt | 2.39 KB |
| 62. UART Driver Development Getting Started/2. Understanding the Requirements.mp4 | 1.84 MB |
| 62. UART Driver Development Getting Started/2. Understanding the Requirements.vtt | 1.78 KB |
| 62. UART Driver Development Getting Started/3. Exploring Different UART Peripherals and pins of the MCU.mp4 | 3.35 MB |
| 62. UART Driver Development Getting Started/3. Exploring Different UART Peripherals and pins of the MCU.vtt | 2.61 KB |
| 63. UART Driver Development Driver Header File/1. UART Register Bit Definitions Macros.mp4 | 4.21 MB |
| 63. UART Driver Development Driver Header File/1. UART Register Bit Definitions Macros.vtt | 2.57 KB |
| 63. UART Driver Development Driver Header File/2. Data Structures used and Driver exposed APIs.mp4 | 11.12 MB |
| 63. UART Driver Development Driver Header File/2. Data Structures used and Driver exposed APIs.vtt | 7.24 KB |
| 64. UART Driver Development Writing init Function/1. Writing inti function and helper functions.mp4 | 11.09 MB |
| 64. UART Driver Development Writing init Function/1. Writing inti function and helper functions.vtt | 6.93 KB |
| 64. UART Driver Development Writing init Function/2. Configuring Word length, Stop Bits.mp4 | 3.65 MB |
| 64. UART Driver Development Writing init Function/2. Configuring Word length, Stop Bits.vtt | 2.26 KB |
| 64. UART Driver Development Writing init Function/3. Configuring Baudrate, oversampling and Interrupts.mp4 | 14.09 MB |
| 64. UART Driver Development Writing init Function/3. Configuring Baudrate, oversampling and Interrupts.vtt | 8.60 KB |
| 65. UART Driver Development Writing TXRX function/1. Writing TX function.mp4 | 6.36 MB |
| 65. UART Driver Development Writing TXRX function/1. Writing TX function.vtt | 3.59 KB |
| 65. UART Driver Development Writing TXRX function/2. Writing RX Function.mp4 | 5.02 MB |
| 65. UART Driver Development Writing TXRX function/2. Writing RX Function.vtt | 3.31 KB |
| 66. UART Driver Development Interrupt Handling/1. Implementing UART IRQ Handler.mp4 | 17.19 MB |
| 66. UART Driver Development Interrupt Handling/1. Implementing UART IRQ Handler.vtt | 17.19 MB |
| 66. UART Driver Development Interrupt Handling/2. Handling TXE interrupt.mp4 | 4.43 MB |
| 66. UART Driver Development Interrupt Handling/2. Handling TXE interrupt.vtt | 3.43 KB |
| 66. UART Driver Development Interrupt Handling/3. Handling of TX Complete Interrupt.mp4 | 6.98 MB |
| 66. UART Driver Development Interrupt Handling/3. Handling of TX Complete Interrupt.vtt | 3.28 KB |
| 66. UART Driver Development Interrupt Handling/4. Handling RXNE Interrupt.mp4 | 8.31 MB |
| 66. UART Driver Development Interrupt Handling/4. Handling RXNE Interrupt.vtt | 5.62 KB |
| 67. UART sample application Getting ready/1. Understanding the Requirements.mp4 | 3.79 MB |
| 67. UART sample application Getting ready/1. Understanding the Requirements.vtt | 2.83 KB |
| 67. UART sample application Getting ready/2. Understanding connection diagram.mp4 | 5.00 MB |
| 67. UART sample application Getting ready/2. Understanding connection diagram.vtt | 3.82 KB |
| 67. UART sample application Getting ready/3. Exploring uart sniffer software for pc.mp4 | 4.98 MB |
| 67. UART sample application Getting ready/3. Exploring uart sniffer software for pc.vtt | 4.03 KB |
| 68. UART sample application Implementation/1. UART Initializations and Txing.mp4 | 10.51 MB |
| 68. UART sample application Implementation/1. UART Initializations and Txing.vtt | 7.25 KB |
| 68. UART sample application Implementation/2. Receiving commands from PC.mp4 | 5.83 MB |
| 68. UART sample application Implementation/2. Receiving commands from PC.vtt | 2.86 KB |
| 69. Running and Testing/1. Testing on hardware.mp4 | 6.19 MB |
| 69. Running and Testing/1. Testing on hardware.vtt | 3.68 KB |
| 7. Embedded Code Debugging Tools n Tips/1. Embedded Code Debugging Part-1.mp4 | 15.51 MB |
| 7. Embedded Code Debugging Tools n Tips/1. Embedded Code Debugging Part-1.vtt | 4.51 KB |
| 7. Embedded Code Debugging Tools n Tips/2. Embedded Code Debugging Part-2 Break points.mp4 | 5.42 MB |
| 7. Embedded Code Debugging Tools n Tips/2. Embedded Code Debugging Part-2 Break points.vtt | 2.30 KB |
| 7. Embedded Code Debugging Tools n Tips/3. Embedded Code Debugging Part-3 Step InStep OverStep Out.mp4 | 14.20 MB |
| 7. Embedded Code Debugging Tools n Tips/3. Embedded Code Debugging Part-3 Step InStep OverStep Out.vtt | 5.77 KB |
| 7. Embedded Code Debugging Tools n Tips/4. Embedded Code Debugging Part-4 DisableKill all Bkpts..mp4 | 24.11 MB |
| 7. Embedded Code Debugging Tools n Tips/4. Embedded Code Debugging Part-4 DisableKill all Bkpts..vtt | 2.67 KB |
| 7. Embedded Code Debugging Tools n Tips/5. Embedded Code Debugging Part-5 Call Stack Usage.mp4 | 73.17 MB |
| 7. Embedded Code Debugging Tools n Tips/5. Embedded Code Debugging Part-5 Call Stack Usage.vtt | 9.62 KB |
| 7. Embedded Code Debugging Tools n Tips/6. Embedded Code Debugging Part-6 Watch Windows.mp4 | 39.80 MB |
| 7. Embedded Code Debugging Tools n Tips/6. Embedded Code Debugging Part-6 Watch Windows.vtt | 3.77 KB |
| 7. Embedded Code Debugging Tools n Tips/7. Embedded Code Debugging Part-7 Memory Windows.mp4 | 169.05 MB |
| 7. Embedded Code Debugging Tools n Tips/7. Embedded Code Debugging Part-7 Memory Windows.vtt | 18.26 KB |
| 7. Embedded Code Debugging Tools n Tips/8. Exercise-Copying data from Flash to RAM.mp4 | 98.50 MB |
| 7. Embedded Code Debugging Tools n Tips/8. Exercise-Copying data from Flash to RAM.vtt | 12.01 KB |
| 70. Creating printf library for your board/1. Introduction.mp4 | 2.23 MB |
| 70. Creating printf library for your board/1. Introduction.vtt | 1.91 KB |
| 70. Creating printf library for your board/2. Implementing UART print apis.mp4 | 12.42 MB |
| 70. Creating printf library for your board/2. Implementing UART print apis.vtt | 7.22 KB |
| 70. Creating printf library for your board/3. Creating static library in KEIL and testing.mp4 | 12.68 MB |
| 70. Creating printf library for your board/3. Creating static library in KEIL and testing.vtt | 7.38 KB |
| 71. MCU Clocks Configurations and Measurements/1. Exploring System , AHB, APB clocks of the MCU.mp4 | 24.10 MB |
| 71. MCU Clocks Configurations and Measurements/1. Exploring System , AHB, APB clocks of the MCU.vtt | 15.59 KB |
| 71. MCU Clocks Configurations and Measurements/2. Clocking MCU by using External Crystal Oscillator(HSE).mp4 | 9.74 MB |
| 71. MCU Clocks Configurations and Measurements/2. Clocking MCU by using External Crystal Oscillator(HSE).vtt | 5.86 KB |
| 71. MCU Clocks Configurations and Measurements/3. Measuring HSE,HSI, PLL and System Clock(Routing Clocks to GPIOs).mp4 | 24.80 MB |
| 71. MCU Clocks Configurations and Measurements/3. Measuring HSE,HSI, PLL and System Clock(Routing Clocks to GPIOs).vtt | 13.63 KB |
| 71. MCU Clocks Configurations and Measurements/4. Clocking MCU by Internal PLL (Running MCU at Full Speed).mp4 | 16.73 MB |
| 71. MCU Clocks Configurations and Measurements/4. Clocking MCU by Internal PLL (Running MCU at Full Speed).vtt | 10.69 KB |
| 71. MCU Clocks Configurations and Measurements/5. Quiz about using HSE.html | 166 B |
| 71. MCU Clocks Configurations and Measurements/6. Bonus Lecture.html | 2.11 KB |
| 72. BONUS LECTURE/1. BONUS LECTURE.html | 3.19 KB |
| 8. Understanding MCU Memory Map/1. Understanding Memory Map of the MCU Part 1.mp4 | 12.64 MB |
| 8. Understanding MCU Memory Map/1. Understanding Memory Map of the MCU Part 1.vtt | 4.67 KB |
| 8. Understanding MCU Memory Map/2. Understanding Memory Map of the MCU Part 2.mp4 | 32.04 MB |
| 8. Understanding MCU Memory Map/2. Understanding Memory Map of the MCU Part 2.vtt | 3.23 KB |
| 8. Understanding MCU Memory Map/3. Understanding Memory Map of the MCU Part 3.mp4 | 91.10 MB |
| 8. Understanding MCU Memory Map/3. Understanding Memory Map of the MCU Part 3.vtt | 8.08 KB |
| 9. MCU Bus Interfaces/1. MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus.mp4 | 44.49 MB |
| 9. MCU Bus Interfaces/1. MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus.vtt | 10.61 KB |
| 9. MCU Bus Interfaces/2. MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2.mp4 | 25.54 MB |
| 9. MCU Bus Interfaces/2. MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2.vtt | 8.17 KB |
| 9. MCU Bus Interfaces/3. MCU Bus Interfaces Explanation Part 3 QA session.mp4 | 124.66 MB |
| 9. MCU Bus Interfaces/3. MCU Bus Interfaces Explanation Part 3 QA session.vtt | 11.60 KB |
| 9. MCU Bus Interfaces/4. Understanding MCU Bus Matrix.mp4 | 15.24 MB |
| 9. MCU Bus Interfaces/4. Understanding MCU Bus Matrix.vtt | 6.33 KB |
| 9. MCU Bus Interfaces/4.1 Using the STM32F2 and STM32F4 DMA controller.pdf.pdf | 1.40 MB |
| [CourseClub.NET].url | 123 B |
| [FCS Forum].url | 133 B |
| [FreeCourseSite.com].url | 127 B |
| udp://exodus.desync.com:6969 |
| udp://open.demonii.com:1337 |
| udp://tracker.coppersurfer.tk:6969 |
| udp://tracker.openbittorrent.com:80 |
TorrentBank
Copyright © 2024