Create Tool:
Create Time:1970-01-01 08:00:00
File Size:5.13 GB
File Count:1993
File Hash:6cb795dbe467218f207380023c270211b4352327
| CADInterfaces/setup.exe | 295.28 MB |
| CADInterfaces/readme_e.rtf | 8.47 MB |
| CADInterfaces/readme_g.rtf | 8.29 MB |
| data/NetFx64.exe | 45.20 MB |
| data/dotnetfx.exe | 22.42 MB |
| data/msxml.msi | 5.04 MB |
| data/vcredist_x86.exe | 2.62 MB |
| data/lhttsiti.exe | 1.98 MB |
| data/spchcpl.exe | 927.17 KB |
| data/WGAPluginInstall.exe | 876.88 KB |
| data/spchapi.EXE | 827.24 KB |
| data/sct10en.exe | 204.97 KB |
| data/unzip.exe | 136.00 KB |
| data/HKLM_UI_tl.reg | 26.53 KB |
| data/license.reg | 5.63 KB |
| data/inscribe.ini | 3.23 KB |
| data/e2file.reg | 2.05 KB |
| data/e3file.reg | 2.05 KB |
| data/tmmdb.reg | 1.27 KB |
| data/sffile.reg | 1.13 KB |
| data/ekpfile.reg | 868 B |
| data/build.ini | 12 B |
| drivers/Eutron/SmartKeyDriversInstaller.msi | 1.03 MB |
| drivers/hasp/HASPUserSetup.exe | 10.29 MB |
| drivers/hasp/HASPuninstall.zip | 9.62 MB |
| drivers/Sentinel/Sentinel Protection Installer 7.6.4.exe | 7.97 MB |
| drivers/wibu/V5.10c/CodeMeterRuntime.exe | 22.48 MB |
| Font/TraditionalChineseFonts.exe | 27.32 MB |
| Font/ChineseFonts.exe | 15.32 MB |
| Font/KoreanFonts.exe | 13.96 MB |
| Font/JapaneseFonts.exe | 12.81 MB |
| hyperCAD/DllSys/msvbvm60.dll | 1.33 MB |
| hyperCAD/DllSys/MSCOMCTL.OCX | 1.02 MB |
| hyperCAD/DllSys/mfc71.dll | 1.01 MB |
| hyperCAD/DllSys/mfc42.dll | 972.05 KB |
| hyperCAD/DllSys/mscomct2.ocx | 632.69 KB |
| hyperCAD/DllSys/xerces-c_1_3.dll | 624.00 KB |
| hyperCAD/DllSys/hhctrl.ocx | 508.33 KB |
| hyperCAD/DllSys/msvcp71.dll | 488.00 KB |
| hyperCAD/DllSys/COMCT332.OCX | 406.77 KB |
| hyperCAD/DllSys/msvcp60.dll | 392.05 KB |
| hyperCAD/DllSys/msvcr71.dll | 340.00 KB |
| hyperCAD/DllSys/xerces13-com.dll | 292.00 KB |
| hyperCAD/DllSys/tabctl32.ocx | 204.70 KB |
| hyperCAD/DllSys/RICHTX32.OCX | 199.51 KB |
| hyperCAD/DllSys/MCI32.OCX | 193.98 KB |
| hyperCAD/DllSys/COMDLG32.OCX | 137.00 KB |
| hyperCAD/DllSys/hlvdd.dll | 121.50 KB |
| hyperCAD/DllSys/mscal.ocx | 93.76 KB |
| hyperCAD/DllSys/atl71.dll | 87.00 KB |
| hyperCAD/DllSys/MSADDNDR.DLL | 84.00 KB |
| hyperCAD/DllSys/MSCOMCTL.DEP | 2.44 KB |
| hyperCAD/DllSys/mscal_EULA.txt | 671 B |
| hyperCAD/doc/english/samples/mold/soap_dish_sf2Derived.e3 | 2.88 MB |
| hyperCAD/doc/english/samples/mold/MoldPartDerived.e3 | 542.00 KB |
| hyperCAD/doc/english/samples/mold/soap_dish_sf2.e3 | 514.00 KB |
| hyperCAD/doc/english/samples/mold/cooling.e3 | 107.50 KB |
| hyperCAD/doc/english/samples/mold/soap_dish_assembly1.e3 | 100.50 KB |
| hyperCAD/doc/english/samples/mold/soap_dish_Assembly.e3 | 86.00 KB |
| hyperCAD/doc/english/samples/mold/volume_split.e3 | 60.00 KB |
| hyperCAD/doc/english/samples/mold/Model1.e3 | 58.00 KB |
| hyperCAD/doc/english/samples/mold/Model1Derived.e3 | 56.00 KB |
| hyperCAD/doc/english/samples/mold/electrode.e3 | 54.50 KB |
| hyperCAD/doc/english/samples/mold/Model1Derived-Core-8.e3 | 43.50 KB |
| hyperCAD/doc/english/samples/mold/Model1Derived-Cavity-6.e3 | 27.50 KB |
| hyperCAD/doc/english/samples/pump/plate.e3 | 3.61 MB |
| hyperCAD/doc/english/samples/pump/back_plate.e3 | 298.50 KB |
| hyperCAD/doc/english/samples/pump/housing.e3 | 285.50 KB |
| hyperCAD/doc/english/samples/pump/exp_view_edit.e3 | 270.50 KB |
| hyperCAD/doc/english/samples/pump/exploded_view.e3 | 266.00 KB |
| hyperCAD/doc/english/samples/pump/sleeve.e3 | 247.00 KB |
| hyperCAD/doc/english/samples/pump/shaft.e3 | 213.00 KB |
| hyperCAD/doc/english/samples/pump/pump_exp_view.e3 | 197.50 KB |
| hyperCAD/doc/english/samples/pump/assy_pump.e3 | 196.50 KB |
| hyperCAD/doc/english/samples/pump/assy_pump_derive.e3 | 192.00 KB |
| hyperCAD/doc/english/samples/pump/piston.e3 | 137.50 KB |
| hyperCAD/doc/english/samples/pump/cap.e3 | 92.50 KB |
| hyperCAD/doc/english/samples/pump/support.e3 | 83.50 KB |
| hyperCAD/doc/english/samples/pump/ring.e3 | 64.00 KB |
| hyperCAD/doc/english/samples/pump/m8x80.e3 | 63.50 KB |
| hyperCAD/doc/english/samples/pump/m6x80.e3 | 39.50 KB |
| hyperCAD/doc/english/samples/render/Wheel_Rim.e3 | 4.27 MB |
| hyperCAD/doc/english/samples/render/boat.e3 | 1.70 MB |
| hyperCAD/doc/english/samples/render/environment1.jpg | 78.37 KB |
| hyperCAD/doc/english/samples/samplec.e3 | 5.19 MB |
| hyperCAD/doc/english/samples/crab.e3 | 1.65 MB |
| hyperCAD/doc/english/samples/check_interferences.e3 | 1.50 MB |
| hyperCAD/doc/english/samples/KiteWings.e3 | 1.29 MB |
| hyperCAD/doc/english/samples/make_solid_conditions.e3 | 1.00 MB |
| hyperCAD/doc/english/samples/skin-2.jpg | 810.61 KB |
| hyperCAD/doc/english/samples/GSMH.e3 | 718.50 KB |
| hyperCAD/doc/english/samples/glm_symmetry.e3 | 680.00 KB |
| hyperCAD/doc/english/samples/GRB_Sample_Car.e3 | 678.00 KB |
| hyperCAD/doc/english/samples/Frame_modify.e3 | 464.00 KB |
| hyperCAD/doc/english/samples/section_view.e3 | 455.50 KB |
| hyperCAD/doc/english/samples/Drafter.e3 | 413.50 KB |
| hyperCAD/doc/english/samples/Spined_Twist_Adv.e3 | 361.50 KB |
| hyperCAD/doc/english/samples/VertexRip.e3 | 356.00 KB |
| hyperCAD/doc/english/samples/texture_mod.e3 | 352.50 KB |
| hyperCAD/doc/english/samples/texture_ins.e3 | 351.00 KB |
| hyperCAD/doc/english/samples/Modify_tubing_parts.e3 | 294.00 KB |
| hyperCAD/doc/english/samples/robot.e3 | 258.00 KB |
| hyperCAD/doc/english/samples/tobeunbent1.e3 | 247.50 KB |
| hyperCAD/doc/english/samples/pattern_surface_based.e3 | 244.50 KB |
| hyperCAD/doc/english/samples/Flexible.e3 | 208.50 KB |
| hyperCAD/doc/english/samples/camera.e3 | 189.50 KB |
| hyperCAD/doc/english/samples/Generic_Protursion_Surface.e3 | 184.00 KB |
| hyperCAD/doc/english/samples/Fuzzy_offset.e3 | 179.50 KB |
| hyperCAD/doc/english/samples/a3.e3 | 177.00 KB |
| hyperCAD/doc/english/samples/a1.e3 | 164.00 KB |
| hyperCAD/doc/english/samples/a2.e3 | 161.00 KB |
| hyperCAD/doc/english/samples/walk_through.e3 | 155.00 KB |
| hyperCAD/doc/english/samples/pattern_curve_based.e3 | 149.50 KB |
| hyperCAD/doc/english/samples/thumbwheel.e3 | 148.00 KB |
| hyperCAD/doc/english/samples/Weld_Vbutt.e2 | 140.72 KB |
| hyperCAD/doc/english/samples/base_any_mating.e3 | 140.50 KB |
| hyperCAD/doc/english/samples/RotSweep.e3 | 140.00 KB |
| hyperCAD/doc/english/samples/Generic_Slot_Plane.e3 | 128.00 KB |
| hyperCAD/doc/english/samples/ToBeUnbent.e3 | 125.50 KB |
| hyperCAD/doc/english/samples/Slot_Multi_Profile.e3 | 120.00 KB |
| hyperCAD/doc/english/samples/Super_capping.e3 | 111.50 KB |
| hyperCAD/doc/english/samples/sr0308.e3 | 108.50 KB |
| hyperCAD/doc/english/samples/Assembly.e3 | 103.00 KB |
| hyperCAD/doc/english/samples/Groove.e3 | 99.50 KB |
| hyperCAD/doc/english/samples/Standard_Thread.e3 | 96.50 KB |
| hyperCAD/doc/english/samples/Lip.e3 | 93.00 KB |
| hyperCAD/doc/english/samples/ExtrFla83.e3 | 89.50 KB |
| hyperCAD/doc/english/samples/GlobalReplicate_02.e3 | 87.50 KB |
| hyperCAD/doc/english/samples/basin.e3 | 87.00 KB |
| hyperCAD/doc/english/samples/LReps.e3 | 87.00 KB |
| hyperCAD/doc/english/samples/sib_connecting_rod.e3 | 86.00 KB |
| hyperCAD/doc/english/samples/MSTRPEN.e3 | 85.00 KB |
| hyperCAD/doc/english/samples/skin-1.jpg | 81.10 KB |
| hyperCAD/doc/english/samples/cl_01_01.e3 | 81.00 KB |
| hyperCAD/doc/english/samples/ToBeUnbent2.e3 | 78.50 KB |
| hyperCAD/doc/english/samples/cl_01_06.e3 | 77.50 KB |
| hyperCAD/doc/english/samples/SectionsAlongCurve.e3 | 76.50 KB |
| hyperCAD/doc/english/samples/rebend.e3 | 75.50 KB |
| hyperCAD/doc/english/samples/pivot_arm.e3 | 74.00 KB |
| hyperCAD/doc/english/samples/GlobalReplicate_01.e3 | 74.00 KB |
| hyperCAD/doc/english/samples/RemoveOverlaps+HoleTable.e3 | 72.50 KB |
| hyperCAD/doc/english/samples/rear end cap+body.e3 | 71.00 KB |
| hyperCAD/doc/english/samples/Unbend.e3 | 71.00 KB |
| hyperCAD/doc/english/samples/body_pen.e3 | 71.00 KB |
| hyperCAD/doc/english/samples/step_bend.e3 | 70.50 KB |
| hyperCAD/doc/english/samples/GM_EX_04.e3 | 69.00 KB |
| hyperCAD/doc/english/samples/cut_solid.e3 | 68.00 KB |
| hyperCAD/doc/english/samples/frame_insert.e3 | 64.00 KB |
| hyperCAD/doc/english/samples/radial_guide.e3 | 62.00 KB |
| hyperCAD/doc/english/samples/Rip_Curve_Unbend.e3 | 61.00 KB |
| hyperCAD/doc/english/samples/Mirror_surf.e3 | 60.50 KB |
| hyperCAD/doc/english/samples/Spined_Twist.e3 | 59.50 KB |
| hyperCAD/doc/english/samples/BendOnProfile.e3 | 59.50 KB |
| hyperCAD/doc/english/samples/Generic_Protursion.e3 | 58.50 KB |
| hyperCAD/doc/english/samples/tsmf.e3 | 58.50 KB |
| hyperCAD/doc/english/samples/radial_arm.e3 | 58.50 KB |
| hyperCAD/doc/english/samples/D-BODY-01.e3 | 58.00 KB |
| hyperCAD/doc/english/samples/ToBeBent.e3 | 56.50 KB |
| hyperCAD/doc/english/samples/ExtractSolid_global.e3 | 56.00 KB |
| hyperCAD/doc/english/samples/stilo.e3 | 56.00 KB |
| hyperCAD/doc/english/samples/LIPS.e3 | 56.00 KB |
| hyperCAD/doc/english/samples/sft_t3logo.e3 | 55.50 KB |
| hyperCAD/doc/english/samples/cv010215.e3 | 55.00 KB |
| hyperCAD/doc/english/samples/mirror_mirror.e3 | 55.00 KB |
| hyperCAD/doc/english/samples/gb_limitingcurve.e3 | 54.00 KB |
| hyperCAD/doc/english/samples/Surface_based.e3 | 54.00 KB |
| hyperCAD/doc/english/samples/stilo_blue_double.e3 | 53.50 KB |
| hyperCAD/doc/english/samples/ISM_move_face.e3 | 53.00 KB |
| hyperCAD/doc/english/samples/stilo_blue.e3 | 52.50 KB |
| hyperCAD/doc/english/samples/Associate-scale.e3 | 51.50 KB |
| hyperCAD/doc/english/samples/ISM_offset.e3 | 51.50 KB |
| hyperCAD/doc/english/samples/Edge_Fillet_Hole.e3 | 51.00 KB |
| hyperCAD/doc/english/samples/pivot_guide.e3 | 51.00 KB |
| hyperCAD/doc/english/samples/GlobalSweep01.e3 | 50.00 KB |
| hyperCAD/doc/english/samples/ISM_remove_faces.e3 | 50.00 KB |
| hyperCAD/doc/english/samples/ISM_prop_limits.e3 | 49.50 KB |
| hyperCAD/doc/english/samples/flange_relief.e3 | 49.50 KB |
| hyperCAD/doc/english/samples/globalplanar01.e3 | 49.50 KB |
| hyperCAD/doc/english/samples/spring1.e3 | 49.50 KB |
| hyperCAD/doc/english/samples/cv010315.e3 | 49.00 KB |
| hyperCAD/doc/english/samples/Edge_Fillet_Simple.e3 | 48.50 KB |
| hyperCAD/doc/english/samples/Associative_translation.e3 | 48.00 KB |
| hyperCAD/doc/english/samples/Face_to_face_roll.e3 | 45.50 KB |
| hyperCAD/doc/english/samples/capping.e3 | 45.50 KB |
| hyperCAD/doc/english/samples/a+c.e3 | 45.00 KB |
| hyperCAD/doc/english/samples/Generic_Ruled_Surface.e3 | 45.00 KB |
| hyperCAD/doc/english/samples/pillar_any_mating.e3 | 43.50 KB |
| hyperCAD/doc/english/samples/designaids_uc_tang.e3 | 43.50 KB |
| hyperCAD/doc/english/samples/offset3d.e3 | 43.50 KB |
| hyperCAD/doc/english/samples/D-TIP.e3 | 43.50 KB |
| hyperCAD/doc/english/samples/a+b.e3 | 43.50 KB |
| hyperCAD/doc/english/samples/Face_to_face_fillet.e3 | 42.00 KB |
| hyperCAD/doc/english/samples/ExtractSolid.e3 | 42.00 KB |
| hyperCAD/doc/english/samples/Weld_Vbutt.e3 | 41.50 KB |
| hyperCAD/doc/english/samples/zm.e3 | 41.50 KB |
| hyperCAD/doc/english/samples/Flange83.e3 | 40.00 KB |
| hyperCAD/doc/english/samples/D-BCAP-01.e3 | 40.00 KB |
| hyperCAD/doc/english/samples/IntersectCurve.e3 | 40.00 KB |
| hyperCAD/doc/english/samples/LocalUnion.e3 | 39.50 KB |
| hyperCAD/doc/english/samples/Tube_Welded.e3 | 39.50 KB |
| hyperCAD/doc/english/samples/GRB_Sample.e3 | 39.50 KB |
| hyperCAD/doc/english/samples/peanut.e3 | 39.50 KB |
| hyperCAD/doc/english/samples/Three_profiles_sweep.e3 | 38.50 KB |
| hyperCAD/doc/english/samples/D-BCAP-02.e3 | 38.50 KB |
| hyperCAD/doc/english/samples/alongviewdirection.e3 | 38.50 KB |
| hyperCAD/doc/english/samples/GRB_Sample_TwoModes.e3 | 38.50 KB |
| hyperCAD/doc/english/samples/sketchedrip_points.e3 | 38.00 KB |
| hyperCAD/doc/english/samples/frame_custom.e3 | 38.00 KB |
| hyperCAD/doc/english/samples/tangentplane_srfsrf.e3 | 38.00 KB |
| hyperCAD/doc/english/samples/rear end cap.e3 | 37.50 KB |
| hyperCAD/doc/english/samples/bendonslotprofile.e3 | 37.50 KB |
| hyperCAD/doc/english/samples/fillet-capping.e3 | 36.50 KB |
| hyperCAD/doc/english/samples/IsoparametricPropagation.e3 | 36.50 KB |
| hyperCAD/doc/english/samples/fillet_edges.e3 | 36.50 KB |
| hyperCAD/doc/english/samples/Tubing_parts.e3 | 36.50 KB |
| hyperCAD/doc/english/samples/ConstrSyn.e3 | 36.00 KB |
| hyperCAD/doc/english/samples/pattern_pattern.e3 | 35.50 KB |
| hyperCAD/doc/english/samples/RemoveOverlaps+HoleTable.e2 | 35.00 KB |
| hyperCAD/doc/english/samples/SplitCurve_RuledBoundary.e3 | 35.00 KB |
| hyperCAD/doc/english/samples/surfaceadvancedcontinuity.e3 | 35.00 KB |
| hyperCAD/doc/english/samples/solid_ruled.e3 | 35.00 KB |
| hyperCAD/doc/english/samples/to_14_07.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/cuttingbom.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/Wizard.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/unlink.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/RadialSections.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/offsetsamples.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/solid_single_profile.e3 | 34.50 KB |
| hyperCAD/doc/english/samples/pattern_constant.e3 | 34.00 KB |
| hyperCAD/doc/english/samples/lofted_stretched.e3 | 34.00 KB |
| hyperCAD/doc/english/samples/Continuity3.e3 | 33.50 KB |
| hyperCAD/doc/english/samples/splitwithsilhouette.e3 | 33.50 KB |
| hyperCAD/doc/english/samples/Weld_Fillet.e3 | 33.50 KB |
| hyperCAD/doc/english/samples/Tubing_network_path.e3 | 33.50 KB |
| hyperCAD/doc/english/samples/ISM_selective_closure.e3 | 33.50 KB |
| hyperCAD/doc/english/samples/ExtFlan01.e3 | 33.00 KB |
| hyperCAD/doc/english/samples/trimsurfwithlimits.e3 | 33.00 KB |
| hyperCAD/doc/english/samples/ISM_replace_face.e3 | 33.00 KB |
| hyperCAD/doc/english/samples/sketchedrip.e3 | 33.00 KB |
| hyperCAD/doc/english/samples/to_90_02.e3 | 32.50 KB |
| hyperCAD/doc/english/samples/ms_01_09.e3 | 32.50 KB |
| hyperCAD/doc/english/samples/ISM_scale_copy.e3 | 32.50 KB |
| hyperCAD/doc/english/samples/GRB_Explain.e3 | 32.50 KB |
| hyperCAD/doc/english/samples/LocalDiffInt.e3 | 32.50 KB |
| hyperCAD/doc/english/samples/splitfaces.e3 | 32.00 KB |
| hyperCAD/doc/english/samples/solid_flange.e3 | 32.00 KB |
| hyperCAD/doc/english/samples/D-INK-02.e3 | 32.00 KB |
| hyperCAD/doc/english/samples/handle.e3 | 32.00 KB |
| hyperCAD/doc/english/samples/CappingExistingSurface.e3 | 32.00 KB |
| hyperCAD/doc/english/samples/RakeSweep_ReferenceSurface.e3 | 31.50 KB |
| hyperCAD/doc/english/samples/to0118.e3 | 31.00 KB |
| hyperCAD/doc/english/samples/Angular_Pattern.e2 | 31.00 KB |
| hyperCAD/doc/english/samples/UVSplit.e3 | 30.50 KB |
| hyperCAD/doc/english/samples/spinedfillet.e3 | 30.50 KB |
| hyperCAD/doc/english/samples/lofted_ruled.e3 | 30.50 KB |
| hyperCAD/doc/english/samples/ExtFlan02.e3 | 30.50 KB |
| hyperCAD/doc/english/samples/UVcurve-02.e3 | 30.00 KB |
| hyperCAD/doc/english/samples/spf_constant.e3 | 30.00 KB |
| hyperCAD/doc/english/samples/ISM_closure.e3 | 30.00 KB |
| hyperCAD/doc/english/samples/Continuity_T.e3 | 30.00 KB |
| hyperCAD/doc/english/samples/D-INK-01.e3 | 30.00 KB |
| hyperCAD/doc/english/samples/Continuity2.e3 | 29.50 KB |
| hyperCAD/doc/english/samples/silhouette.e3 | 29.50 KB |
| hyperCAD/doc/english/samples/cv_01_14.e3 | 29.50 KB |
| hyperCAD/doc/english/samples/ExtFlan03.e3 | 29.00 KB |
| hyperCAD/doc/english/samples/cv030415.e3 | 29.00 KB |
| hyperCAD/doc/english/samples/lead.e3 | 29.00 KB |
| hyperCAD/doc/english/samples/needle.e3 | 29.00 KB |
| hyperCAD/doc/english/samples/planardevelopment.e3 | 29.00 KB |
| hyperCAD/doc/english/samples/xx+yy.e3 | 28.50 KB |
| hyperCAD/doc/english/samples/Continuity.e3 | 28.50 KB |
| hyperCAD/doc/english/samples/blendingshape.e3 | 28.50 KB |
| hyperCAD/doc/english/samples/degeneratesurface.e3 | 28.00 KB |
| hyperCAD/doc/english/samples/connect_crv_to_srf.e3 | 28.00 KB |
| hyperCAD/doc/english/samples/VV.e3 | 28.00 KB |
| hyperCAD/doc/english/samples/GSM-SOLID.e3 | 28.00 KB |
| hyperCAD/doc/english/samples/xx.e3 | 28.00 KB |
| hyperCAD/doc/english/samples/solid_from_text.e3 | 27.50 KB |
| hyperCAD/doc/english/samples/bend_continuity.e3 | 27.50 KB |
| hyperCAD/doc/english/samples/yy.e3 | 27.50 KB |
| hyperCAD/doc/english/samples/Weld_Fillet.e2 | 27.50 KB |
| hyperCAD/doc/english/samples/xxxx.e3 | 26.50 KB |
| hyperCAD/doc/english/samples/xxzz.e3 | 26.50 KB |
| hyperCAD/doc/english/samples/draftangle.e3 | 26.00 KB |
| hyperCAD/doc/english/samples/Connect2.e3 | 26.00 KB |
| hyperCAD/doc/english/samples/ThroughPoints.e3 | 25.50 KB |
| hyperCAD/doc/english/samples/cv010415.e3 | 25.00 KB |
| hyperCAD/doc/english/samples/OffsetSurface.e3 | 25.00 KB |
| hyperCAD/doc/english/samples/ms_01_12.e3 | 24.50 KB |
| hyperCAD/doc/english/samples/ThroughCurves.e3 | 24.50 KB |
| hyperCAD/doc/english/samples/bend_constraints.e3 | 24.50 KB |
| hyperCAD/doc/english/samples/extend.e3 | 24.50 KB |
| hyperCAD/doc/english/samples/spsrf_blending.e3 | 24.00 KB |
| hyperCAD/doc/english/samples/CleanCurves.e3 | 24.00 KB |
| hyperCAD/doc/english/samples/pt_07_03.e3 | 24.00 KB |
| hyperCAD/doc/english/samples/yyy.e3 | 24.00 KB |
| hyperCAD/doc/english/samples/spsrf_multi_4.e3 | 23.50 KB |
| hyperCAD/doc/english/samples/sr_01_11.e3 | 23.50 KB |
| hyperCAD/doc/english/samples/capvv.e3 | 23.50 KB |
| hyperCAD/doc/english/samples/cv_01_08.e3 | 23.50 KB |
| hyperCAD/doc/english/samples/makesolid.e3 | 23.50 KB |
| hyperCAD/doc/english/samples/spsrf_multi.e3 | 23.00 KB |
| hyperCAD/doc/english/samples/FreeBoundaries.e3 | 23.00 KB |
| hyperCAD/doc/english/samples/proportional.e3 | 23.00 KB |
| hyperCAD/doc/english/samples/UVcurve.e3 | 23.00 KB |
| hyperCAD/doc/english/samples/RakeSweep.e3 | 23.00 KB |
| hyperCAD/doc/english/samples/pt_07_02.e3 | 23.00 KB |
| hyperCAD/doc/english/samples/tec.e3 | 22.50 KB |
| hyperCAD/doc/english/samples/sr0508.e3 | 22.50 KB |
| hyperCAD/doc/english/samples/spsrf_orientation.e3 | 22.50 KB |
| hyperCAD/doc/english/samples/curveadvancedcontinuity.e3 | 22.50 KB |
| hyperCAD/doc/english/samples/helixsurf.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/sr_01_10.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/pt_07_01.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/GlobalSweep02.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/spsrf_scaling.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/measure_variable.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/spsrf_chain.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/spsrf_1b_1d.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/Ucurve.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/designaids1.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/pipe_drive.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/AdvancedPipe.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/plane_tangent.e3 | 22.00 KB |
| hyperCAD/doc/english/samples/createhelix.e3 | 21.50 KB |
| hyperCAD/doc/english/samples/mc_99_04.e3 | 21.50 KB |
| hyperCAD/doc/english/samples/sr_01_03.e3 | 21.50 KB |
| hyperCAD/doc/english/samples/mc_01_04.e3 | 21.50 KB |
| hyperCAD/doc/english/samples/mc_02_04.e3 | 21.00 KB |
| hyperCAD/doc/english/samples/sr0108.e3 | 21.00 KB |
| hyperCAD/doc/english/samples/cv_01_07.e3 | 21.00 KB |
| hyperCAD/doc/english/samples/mc_01_02.e3 | 21.00 KB |
| hyperCAD/doc/english/samples/connect.e3 | 21.00 KB |
| hyperCAD/doc/english/samples/mc_01_08.e3 | 21.00 KB |
| hyperCAD/doc/english/samples/sr0208.e3 | 20.00 KB |
| hyperCAD/doc/english/samples/GM_EX_03.e3 | 19.50 KB |
| hyperCAD/doc/english/samples/designaids_uc_perp.e3 | 19.00 KB |
| hyperCAD/doc/english/samples/GM_EX_02.e3 | 18.50 KB |
| hyperCAD/doc/english/samples/GM_EX_01.e3 | 18.00 KB |
| hyperCAD/doc/english/samples/cv_90_03.e3 | 17.50 KB |
| hyperCAD/doc/english/samples/sr0608.e3 | 17.00 KB |
| hyperCAD/doc/english/samples/mc_01_07.e3 | 16.00 KB |
| hyperCAD/doc/english/samples/to0117.e3 | 14.00 KB |
| hyperCAD/doc/english/samples/hand.jpg | 618 B |
| hyperCAD/doc/english/insthw.chm | 9.05 MB |
| hyperCAD/doc/english/help.chm | 8.43 MB |
| hyperCAD/doc/english/gsm.chm | 5.16 MB |
| hyperCAD/doc/english/solids.chm | 3.04 MB |
| hyperCAD/doc/english/surfaces.chm | 2.76 MB |
| hyperCAD/doc/english/forcus.chm | 2.32 MB |
| hyperCAD/doc/english/rendering.chm | 2.24 MB |
| hyperCAD/doc/english/COMRef1.chm | 1.96 MB |
| hyperCAD/doc/english/COMRef2.chm | 1.79 MB |
| hyperCAD/doc/english/AllHhh.xml | 1.19 MB |
| hyperCAD/doc/english/cadenas.chm | 1.14 MB |
| hyperCAD/doc/english/as.chm | 1.08 MB |
| hyperCAD/doc/english/COMRef4.chm | 1.06 MB |
| hyperCAD/doc/english/shm.chm | 1.02 MB |
| hyperCAD/doc/english/dw.chm | 748.18 KB |
| hyperCAD/doc/english/prf.chm | 657.54 KB |
| hyperCAD/doc/english/reshape.chm | 642.26 KB |
| hyperCAD/doc/english/h_index.txt | 579.79 KB |
| hyperCAD/doc/english/cnv.chm | 574.72 KB |
| hyperCAD/doc/english/wp.chm | 554.06 KB |
| hyperCAD/doc/english/draft.chm | 530.70 KB |
| hyperCAD/doc/english/thinkcmp.chm | 525.24 KB |
| hyperCAD/doc/english/thp.chm | 505.32 KB |
| hyperCAD/doc/english/dimensio.chm | 504.16 KB |
| hyperCAD/doc/english/rgpl_61.chm | 486.74 KB |
| hyperCAD/doc/english/Groups.chm | 442.72 KB |
| hyperCAD/doc/english/tubing.chm | 427.95 KB |
| hyperCAD/doc/english/aixprod.chm | 386.42 KB |
| hyperCAD/doc/english/selsna.chm | 385.94 KB |
| hyperCAD/doc/english/DFTB.chm | 335.94 KB |
| hyperCAD/doc/english/COM.chm | 325.02 KB |
| hyperCAD/doc/english/an.chm | 310.14 KB |
| hyperCAD/doc/english/mold.chm | 291.94 KB |
| hyperCAD/doc/english/interact.chm | 287.73 KB |
| hyperCAD/doc/english/cu.chm | 285.37 KB |
| hyperCAD/doc/english/transf.chm | 278.34 KB |
| hyperCAD/doc/english/rn_td.chm | 277.75 KB |
| hyperCAD/doc/english/index.idx | 274.67 KB |
| hyperCAD/doc/english/la.chm | 271.63 KB |
| hyperCAD/doc/english/sp.chm | 240.47 KB |
| hyperCAD/doc/english/Print.chm | 217.08 KB |
| hyperCAD/doc/english/CapPlay.chm | 206.05 KB |
| hyperCAD/doc/english/animate.chm | 191.32 KB |
| hyperCAD/doc/english/COMRef3.chm | 176.28 KB |
| hyperCAD/doc/english/XMLEditor.chm | 173.89 KB |
| hyperCAD/doc/english/frame.chm | 161.62 KB |
| hyperCAD/doc/english/SolidUtilities.chm | 154.54 KB |
| hyperCAD/doc/english/Errman.chm | 152.96 KB |
| hyperCAD/doc/english/vb.chm | 150.62 KB |
| hyperCAD/doc/english/ism.chm | 144.13 KB |
| hyperCAD/doc/english/welds.chm | 138.37 KB |
| hyperCAD/doc/english/mscr.chm | 138.06 KB |
| hyperCAD/doc/english/gbplo.chm | 129.89 KB |
| hyperCAD/doc/english/tdein.chm | 122.08 KB |
| hyperCAD/doc/english/cm.chm | 121.57 KB |
| hyperCAD/doc/english/UConnect.chm | 121.27 KB |
| hyperCAD/doc/english/Layers.chm | 107.23 KB |
| hyperCAD/doc/english/chelp.chm | 92.24 KB |
| hyperCAD/doc/english/COMReleaseNotes.chm | 88.27 KB |
| hyperCAD/doc/english/bckcmp.chm | 60.99 KB |
| hyperCAD/doc/english/MoveCopy.chm | 55.06 KB |
| hyperCAD/doc/english/HQRE.chm | 52.31 KB |
| hyperCAD/doc/english/pcl.chm | 47.28 KB |
| hyperCAD/doc/english/ce.chm | 43.47 KB |
| hyperCAD/doc/english/cmd.chm | 36.81 KB |
| hyperCAD/doc/english/markup.chm | 34.70 KB |
| hyperCAD/doc/english/icons.chm | 26.40 KB |
| hyperCAD/doc/english/inst.chm | 26.37 KB |
| hyperCAD/doc/english/dxf.chm | 25.05 KB |
| hyperCAD/doc/english/sw.chm | 20.47 KB |
| hyperCAD/doc/english/ansys.chm | 19.50 KB |
| hyperCAD/doc/english/patch01.chm | 18.73 KB |
| hyperCAD/doc/english/fontconverter.chm | 13.44 KB |
| hyperCAD/doc/english/config.idx | 58 B |
| hyperCAD/doc/french/samples/mold/soap_dish_sf2Derived.e3 | 2.88 MB |
| hyperCAD/doc/french/samples/mold/MoldPartDerived.e3 | 542.00 KB |
| hyperCAD/doc/french/samples/mold/soap_dish_sf2.e3 | 514.00 KB |
| hyperCAD/doc/french/samples/mold/cooling.e3 | 107.50 KB |
| hyperCAD/doc/french/samples/mold/soap_dish_assembly1.e3 | 100.50 KB |
| hyperCAD/doc/french/samples/mold/soap_dish_Assembly.e3 | 86.00 KB |
| hyperCAD/doc/french/samples/mold/volume_split.e3 | 60.00 KB |
| hyperCAD/doc/french/samples/mold/Model1.e3 | 58.00 KB |
| hyperCAD/doc/french/samples/mold/Model1Derived.e3 | 56.00 KB |
| hyperCAD/doc/french/samples/mold/electrode.e3 | 54.50 KB |
| hyperCAD/doc/french/samples/mold/Model1Derived-Core-8.e3 | 43.50 KB |
| hyperCAD/doc/french/samples/mold/Model1Derived-Cavity-6.e3 | 27.50 KB |
| hyperCAD/doc/french/samples/pump/plate.e3 | 3.61 MB |
| hyperCAD/doc/french/samples/pump/back_plate.e3 | 298.50 KB |
| hyperCAD/doc/french/samples/pump/housing.e3 | 285.50 KB |
| hyperCAD/doc/french/samples/pump/exp_view_edit.e3 | 270.50 KB |
| hyperCAD/doc/french/samples/pump/exploded_view.e3 | 266.00 KB |
| hyperCAD/doc/french/samples/pump/sleeve.e3 | 247.00 KB |
| hyperCAD/doc/french/samples/pump/shaft.e3 | 213.00 KB |
| hyperCAD/doc/french/samples/pump/pump_exp_view.e3 | 197.50 KB |
| hyperCAD/doc/french/samples/pump/assy_pump.e3 | 196.50 KB |
| hyperCAD/doc/french/samples/pump/assy_pump_derive.e3 | 192.00 KB |
| hyperCAD/doc/french/samples/pump/piston.e3 | 137.50 KB |
| hyperCAD/doc/french/samples/pump/cap.e3 | 92.50 KB |
| hyperCAD/doc/french/samples/pump/support.e3 | 83.50 KB |
| hyperCAD/doc/french/samples/pump/ring.e3 | 64.00 KB |
| hyperCAD/doc/french/samples/pump/m8x80.e3 | 63.50 KB |
| hyperCAD/doc/french/samples/pump/m6x80.e3 | 39.50 KB |
| hyperCAD/doc/french/samples/render/Wheel_Rim.e3 | 4.27 MB |
| hyperCAD/doc/french/samples/render/boat.e3 | 1.70 MB |
| hyperCAD/doc/french/samples/render/environment1.jpg | 78.37 KB |
| hyperCAD/doc/french/samples/samplec.e3 | 5.19 MB |
| hyperCAD/doc/french/samples/crab.e3 | 1.65 MB |
| hyperCAD/doc/french/samples/check_interferences.e3 | 1.50 MB |
| hyperCAD/doc/french/samples/KiteWings.e3 | 1.29 MB |
| hyperCAD/doc/french/samples/make_solid_conditions.e3 | 1.00 MB |
| hyperCAD/doc/french/samples/skin-2.jpg | 810.61 KB |
| hyperCAD/doc/french/samples/GSMH.e3 | 718.50 KB |
| hyperCAD/doc/french/samples/glm_symmetry.e3 | 680.00 KB |
| hyperCAD/doc/french/samples/GRB_Sample_Car.e3 | 678.00 KB |
| hyperCAD/doc/french/samples/Frame_modify.e3 | 464.00 KB |
| hyperCAD/doc/french/samples/section_view.e3 | 455.50 KB |
| hyperCAD/doc/french/samples/Drafter.e3 | 413.50 KB |
| hyperCAD/doc/french/samples/Spined_Twist_Adv.e3 | 361.50 KB |
| hyperCAD/doc/french/samples/VertexRip.e3 | 356.00 KB |
| hyperCAD/doc/french/samples/texture_mod.e3 | 352.50 KB |
| hyperCAD/doc/french/samples/texture_ins.e3 | 351.00 KB |
| hyperCAD/doc/french/samples/Modify_tubing_parts.e3 | 294.00 KB |
| hyperCAD/doc/french/samples/robot.e3 | 258.00 KB |
| hyperCAD/doc/french/samples/tobeunbent1.e3 | 247.50 KB |
| hyperCAD/doc/french/samples/pattern_surface_based.e3 | 244.50 KB |
| hyperCAD/doc/french/samples/Flexible.e3 | 208.50 KB |
| hyperCAD/doc/french/samples/camera.e3 | 189.50 KB |
| hyperCAD/doc/french/samples/Generic_Protursion_Surface.e3 | 184.00 KB |
| hyperCAD/doc/french/samples/Fuzzy_offset.e3 | 179.50 KB |
| hyperCAD/doc/french/samples/a3.e3 | 177.00 KB |
| hyperCAD/doc/french/samples/a1.e3 | 164.00 KB |
| hyperCAD/doc/french/samples/a2.e3 | 161.00 KB |
| hyperCAD/doc/french/samples/walk_through.e3 | 155.00 KB |
| hyperCAD/doc/french/samples/pattern_curve_based.e3 | 149.50 KB |
| hyperCAD/doc/french/samples/thumbwheel.e3 | 148.00 KB |
| hyperCAD/doc/french/samples/Weld_Vbutt.e2 | 140.72 KB |
| hyperCAD/doc/french/samples/base_any_mating.e3 | 140.50 KB |
| hyperCAD/doc/french/samples/RotSweep.e3 | 140.00 KB |
| hyperCAD/doc/french/samples/Generic_Slot_Plane.e3 | 128.00 KB |
| hyperCAD/doc/french/samples/ToBeUnbent.e3 | 125.50 KB |
| hyperCAD/doc/french/samples/Slot_Multi_Profile.e3 | 120.00 KB |
| hyperCAD/doc/french/samples/Super_capping.e3 | 111.50 KB |
| hyperCAD/doc/french/samples/sr0308.e3 | 108.50 KB |
| hyperCAD/doc/french/samples/Assembly.e3 | 103.00 KB |
| hyperCAD/doc/french/samples/Groove.e3 | 99.50 KB |
| hyperCAD/doc/french/samples/Standard_Thread.e3 | 96.50 KB |
| hyperCAD/doc/french/samples/Lip.e3 | 93.00 KB |
| hyperCAD/doc/french/samples/ExtrFla83.e3 | 89.50 KB |
| hyperCAD/doc/french/samples/GlobalReplicate_02.e3 | 87.50 KB |
| hyperCAD/doc/french/samples/basin.e3 | 87.00 KB |
| hyperCAD/doc/french/samples/LReps.e3 | 87.00 KB |
| hyperCAD/doc/french/samples/sib_connecting_rod.e3 | 86.00 KB |
| hyperCAD/doc/french/samples/MSTRPEN.e3 | 85.00 KB |
| hyperCAD/doc/french/samples/skin-1.jpg | 81.10 KB |
| hyperCAD/doc/french/samples/cl_01_01.e3 | 81.00 KB |
| hyperCAD/doc/french/samples/ToBeUnbent2.e3 | 78.50 KB |
| hyperCAD/doc/french/samples/cl_01_06.e3 | 77.50 KB |
| hyperCAD/doc/french/samples/SectionsAlongCurve.e3 | 76.50 KB |
| hyperCAD/doc/french/samples/rebend.e3 | 75.50 KB |
| hyperCAD/doc/french/samples/pivot_arm.e3 | 74.00 KB |
| hyperCAD/doc/french/samples/GlobalReplicate_01.e3 | 74.00 KB |
| hyperCAD/doc/french/samples/RemoveOverlaps+HoleTable.e3 | 72.50 KB |
| hyperCAD/doc/french/samples/rear end cap+body.e3 | 71.00 KB |
| hyperCAD/doc/french/samples/Unbend.e3 | 71.00 KB |
| hyperCAD/doc/french/samples/body_pen.e3 | 71.00 KB |
| hyperCAD/doc/french/samples/step_bend.e3 | 70.50 KB |
| hyperCAD/doc/french/samples/GM_EX_04.e3 | 69.00 KB |
| hyperCAD/doc/french/samples/cut_solid.e3 | 68.00 KB |
| hyperCAD/doc/french/samples/frame_insert.e3 | 64.00 KB |
| hyperCAD/doc/french/samples/radial_guide.e3 | 62.00 KB |
| hyperCAD/doc/french/samples/Rip_Curve_Unbend.e3 | 61.00 KB |
| hyperCAD/doc/french/samples/Mirror_surf.e3 | 60.50 KB |
| hyperCAD/doc/french/samples/Spined_Twist.e3 | 59.50 KB |
| hyperCAD/doc/french/samples/BendOnProfile.e3 | 59.50 KB |
| hyperCAD/doc/french/samples/Generic_Protursion.e3 | 58.50 KB |
| hyperCAD/doc/french/samples/tsmf.e3 | 58.50 KB |
| hyperCAD/doc/french/samples/radial_arm.e3 | 58.50 KB |
| hyperCAD/doc/french/samples/D-BODY-01.e3 | 58.00 KB |
| hyperCAD/doc/french/samples/ToBeBent.e3 | 56.50 KB |
| hyperCAD/doc/french/samples/ExtractSolid_global.e3 | 56.00 KB |
| hyperCAD/doc/french/samples/stilo.e3 | 56.00 KB |
| hyperCAD/doc/french/samples/LIPS.e3 | 56.00 KB |
| hyperCAD/doc/french/samples/sft_t3logo.e3 | 55.50 KB |
| hyperCAD/doc/french/samples/cv010215.e3 | 55.00 KB |
| hyperCAD/doc/french/samples/mirror_mirror.e3 | 55.00 KB |
| hyperCAD/doc/french/samples/gb_limitingcurve.e3 | 54.00 KB |
| hyperCAD/doc/french/samples/Surface_based.e3 | 54.00 KB |
| hyperCAD/doc/french/samples/stilo_blue_double.e3 | 53.50 KB |
| hyperCAD/doc/french/samples/ISM_move_face.e3 | 53.00 KB |
| hyperCAD/doc/french/samples/stilo_blue.e3 | 52.50 KB |
| hyperCAD/doc/french/samples/Associate-scale.e3 | 51.50 KB |
| hyperCAD/doc/french/samples/ISM_offset.e3 | 51.50 KB |
| hyperCAD/doc/french/samples/Edge_Fillet_Hole.e3 | 51.00 KB |
| hyperCAD/doc/french/samples/pivot_guide.e3 | 51.00 KB |
| hyperCAD/doc/french/samples/GlobalSweep01.e3 | 50.00 KB |
| hyperCAD/doc/french/samples/ISM_remove_faces.e3 | 50.00 KB |
| hyperCAD/doc/french/samples/ISM_prop_limits.e3 | 49.50 KB |
| hyperCAD/doc/french/samples/flange_relief.e3 | 49.50 KB |
| hyperCAD/doc/french/samples/globalplanar01.e3 | 49.50 KB |
| hyperCAD/doc/french/samples/spring1.e3 | 49.50 KB |
| hyperCAD/doc/french/samples/cv010315.e3 | 49.00 KB |
| hyperCAD/doc/french/samples/Edge_Fillet_Simple.e3 | 48.50 KB |
| hyperCAD/doc/french/samples/Associative_translation.e3 | 48.00 KB |
| hyperCAD/doc/french/samples/Face_to_face_roll.e3 | 45.50 KB |
| hyperCAD/doc/french/samples/capping.e3 | 45.50 KB |
| hyperCAD/doc/french/samples/a+c.e3 | 45.00 KB |
| hyperCAD/doc/french/samples/Generic_Ruled_Surface.e3 | 45.00 KB |
| hyperCAD/doc/french/samples/pillar_any_mating.e3 | 43.50 KB |
| hyperCAD/doc/french/samples/designaids_uc_tang.e3 | 43.50 KB |
| hyperCAD/doc/french/samples/offset3d.e3 | 43.50 KB |
| hyperCAD/doc/french/samples/D-TIP.e3 | 43.50 KB |
| hyperCAD/doc/french/samples/a+b.e3 | 43.50 KB |
| hyperCAD/doc/french/samples/Face_to_face_fillet.e3 | 42.00 KB |
| hyperCAD/doc/french/samples/ExtractSolid.e3 | 42.00 KB |
| hyperCAD/doc/french/samples/Weld_Vbutt.e3 | 41.50 KB |
| hyperCAD/doc/french/samples/zm.e3 | 41.50 KB |
| hyperCAD/doc/french/samples/Flange83.e3 | 40.00 KB |
| hyperCAD/doc/french/samples/D-BCAP-01.e3 | 40.00 KB |
| hyperCAD/doc/french/samples/IntersectCurve.e3 | 40.00 KB |
| hyperCAD/doc/french/samples/LocalUnion.e3 | 39.50 KB |
| hyperCAD/doc/french/samples/Tube_Welded.e3 | 39.50 KB |
| hyperCAD/doc/french/samples/GRB_Sample.e3 | 39.50 KB |
| hyperCAD/doc/french/samples/peanut.e3 | 39.50 KB |
| hyperCAD/doc/french/samples/Three_profiles_sweep.e3 | 38.50 KB |
| hyperCAD/doc/french/samples/D-BCAP-02.e3 | 38.50 KB |
| hyperCAD/doc/french/samples/alongviewdirection.e3 | 38.50 KB |
| hyperCAD/doc/french/samples/GRB_Sample_TwoModes.e3 | 38.50 KB |
| hyperCAD/doc/french/samples/sketchedrip_points.e3 | 38.00 KB |
| hyperCAD/doc/french/samples/frame_custom.e3 | 38.00 KB |
| hyperCAD/doc/french/samples/tangentplane_srfsrf.e3 | 38.00 KB |
| hyperCAD/doc/french/samples/rear end cap.e3 | 37.50 KB |
| hyperCAD/doc/french/samples/bendonslotprofile.e3 | 37.50 KB |
| hyperCAD/doc/french/samples/fillet-capping.e3 | 36.50 KB |
| hyperCAD/doc/french/samples/IsoparametricPropagation.e3 | 36.50 KB |
| hyperCAD/doc/french/samples/fillet_edges.e3 | 36.50 KB |
| hyperCAD/doc/french/samples/Tubing_parts.e3 | 36.50 KB |
| hyperCAD/doc/french/samples/ConstrSyn.e3 | 36.00 KB |
| hyperCAD/doc/french/samples/pattern_pattern.e3 | 35.50 KB |
| hyperCAD/doc/french/samples/RemoveOverlaps+HoleTable.e2 | 35.00 KB |
| hyperCAD/doc/french/samples/SplitCurve_RuledBoundary.e3 | 35.00 KB |
| hyperCAD/doc/french/samples/surfaceadvancedcontinuity.e3 | 35.00 KB |
| hyperCAD/doc/french/samples/solid_ruled.e3 | 35.00 KB |
| hyperCAD/doc/french/samples/to_14_07.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/cuttingbom.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/Wizard.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/unlink.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/RadialSections.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/offsetsamples.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/solid_single_profile.e3 | 34.50 KB |
| hyperCAD/doc/french/samples/pattern_constant.e3 | 34.00 KB |
| hyperCAD/doc/french/samples/lofted_stretched.e3 | 34.00 KB |
| hyperCAD/doc/french/samples/Continuity3.e3 | 33.50 KB |
| hyperCAD/doc/french/samples/splitwithsilhouette.e3 | 33.50 KB |
| hyperCAD/doc/french/samples/Weld_Fillet.e3 | 33.50 KB |
| hyperCAD/doc/french/samples/Tubing_network_path.e3 | 33.50 KB |
| hyperCAD/doc/french/samples/ISM_selective_closure.e3 | 33.50 KB |
| hyperCAD/doc/french/samples/ExtFlan01.e3 | 33.00 KB |
| hyperCAD/doc/french/samples/trimsurfwithlimits.e3 | 33.00 KB |
| hyperCAD/doc/french/samples/ISM_replace_face.e3 | 33.00 KB |
| hyperCAD/doc/french/samples/sketchedrip.e3 | 33.00 KB |
| hyperCAD/doc/french/samples/to_90_02.e3 | 32.50 KB |
| hyperCAD/doc/french/samples/ms_01_09.e3 | 32.50 KB |
| hyperCAD/doc/french/samples/ISM_scale_copy.e3 | 32.50 KB |
| hyperCAD/doc/french/samples/GRB_Explain.e3 | 32.50 KB |
| hyperCAD/doc/french/samples/LocalDiffInt.e3 | 32.50 KB |
| hyperCAD/doc/french/samples/splitfaces.e3 | 32.00 KB |
| hyperCAD/doc/french/samples/solid_flange.e3 | 32.00 KB |
| hyperCAD/doc/french/samples/D-INK-02.e3 | 32.00 KB |
| hyperCAD/doc/french/samples/handle.e3 | 32.00 KB |
| hyperCAD/doc/french/samples/CappingExistingSurface.e3 | 32.00 KB |
| hyperCAD/doc/french/samples/RakeSweep_ReferenceSurface.e3 | 31.50 KB |
| hyperCAD/doc/french/samples/to0118.e3 | 31.00 KB |
| hyperCAD/doc/french/samples/Angular_Pattern.e2 | 31.00 KB |
| hyperCAD/doc/french/samples/UVSplit.e3 | 30.50 KB |
| hyperCAD/doc/french/samples/spinedfillet.e3 | 30.50 KB |
| hyperCAD/doc/french/samples/lofted_ruled.e3 | 30.50 KB |
| hyperCAD/doc/french/samples/ExtFlan02.e3 | 30.50 KB |
| hyperCAD/doc/french/samples/UVcurve-02.e3 | 30.00 KB |
| hyperCAD/doc/french/samples/spf_constant.e3 | 30.00 KB |
| hyperCAD/doc/french/samples/ISM_closure.e3 | 30.00 KB |
| hyperCAD/doc/french/samples/Continuity_T.e3 | 30.00 KB |
| hyperCAD/doc/french/samples/D-INK-01.e3 | 30.00 KB |
| hyperCAD/doc/french/samples/Continuity2.e3 | 29.50 KB |
| hyperCAD/doc/french/samples/silhouette.e3 | 29.50 KB |
| hyperCAD/doc/french/samples/cv_01_14.e3 | 29.50 KB |
| hyperCAD/doc/french/samples/ExtFlan03.e3 | 29.00 KB |
| hyperCAD/doc/french/samples/cv030415.e3 | 29.00 KB |
| hyperCAD/doc/french/samples/lead.e3 | 29.00 KB |
| hyperCAD/doc/french/samples/needle.e3 | 29.00 KB |
| hyperCAD/doc/french/samples/planardevelopment.e3 | 29.00 KB |
| hyperCAD/doc/french/samples/xx+yy.e3 | 28.50 KB |
| hyperCAD/doc/french/samples/Continuity.e3 | 28.50 KB |
| hyperCAD/doc/french/samples/blendingshape.e3 | 28.50 KB |
| hyperCAD/doc/french/samples/degeneratesurface.e3 | 28.00 KB |
| hyperCAD/doc/french/samples/connect_crv_to_srf.e3 | 28.00 KB |
| hyperCAD/doc/french/samples/VV.e3 | 28.00 KB |
| hyperCAD/doc/french/samples/GSM-SOLID.e3 | 28.00 KB |
| hyperCAD/doc/french/samples/xx.e3 | 28.00 KB |
| hyperCAD/doc/french/samples/solid_from_text.e3 | 27.50 KB |
| hyperCAD/doc/french/samples/bend_continuity.e3 | 27.50 KB |
| hyperCAD/doc/french/samples/yy.e3 | 27.50 KB |
| hyperCAD/doc/french/samples/Weld_Fillet.e2 | 27.50 KB |
| hyperCAD/doc/french/samples/xxxx.e3 | 26.50 KB |
| hyperCAD/doc/french/samples/xxzz.e3 | 26.50 KB |
| hyperCAD/doc/french/samples/draftangle.e3 | 26.00 KB |
| hyperCAD/doc/french/samples/Connect2.e3 | 26.00 KB |
| hyperCAD/doc/french/samples/ThroughPoints.e3 | 25.50 KB |
| hyperCAD/doc/french/samples/cv010415.e3 | 25.00 KB |
| hyperCAD/doc/french/samples/OffsetSurface.e3 | 25.00 KB |
| hyperCAD/doc/french/samples/ms_01_12.e3 | 24.50 KB |
| hyperCAD/doc/french/samples/ThroughCurves.e3 | 24.50 KB |
| hyperCAD/doc/french/samples/bend_constraints.e3 | 24.50 KB |
| hyperCAD/doc/french/samples/extend.e3 | 24.50 KB |
| hyperCAD/doc/french/samples/spsrf_blending.e3 | 24.00 KB |
| hyperCAD/doc/french/samples/CleanCurves.e3 | 24.00 KB |
| hyperCAD/doc/french/samples/pt_07_03.e3 | 24.00 KB |
| hyperCAD/doc/french/samples/yyy.e3 | 24.00 KB |
| hyperCAD/doc/french/samples/spsrf_multi_4.e3 | 23.50 KB |
| hyperCAD/doc/french/samples/sr_01_11.e3 | 23.50 KB |
| hyperCAD/doc/french/samples/capvv.e3 | 23.50 KB |
| hyperCAD/doc/french/samples/cv_01_08.e3 | 23.50 KB |
| hyperCAD/doc/french/samples/makesolid.e3 | 23.50 KB |
| hyperCAD/doc/french/samples/spsrf_multi.e3 | 23.00 KB |
| hyperCAD/doc/french/samples/FreeBoundaries.e3 | 23.00 KB |
| hyperCAD/doc/french/samples/proportional.e3 | 23.00 KB |
| hyperCAD/doc/french/samples/UVcurve.e3 | 23.00 KB |
| hyperCAD/doc/french/samples/RakeSweep.e3 | 23.00 KB |
| hyperCAD/doc/french/samples/pt_07_02.e3 | 23.00 KB |
| hyperCAD/doc/french/samples/tec.e3 | 22.50 KB |
| hyperCAD/doc/french/samples/sr0508.e3 | 22.50 KB |
| hyperCAD/doc/french/samples/spsrf_orientation.e3 | 22.50 KB |
| hyperCAD/doc/french/samples/curveadvancedcontinuity.e3 | 22.50 KB |
| hyperCAD/doc/french/samples/helixsurf.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/sr_01_10.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/pt_07_01.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/GlobalSweep02.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/spsrf_scaling.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/measure_variable.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/spsrf_chain.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/spsrf_1b_1d.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/Ucurve.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/designaids1.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/pipe_drive.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/AdvancedPipe.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/plane_tangent.e3 | 22.00 KB |
| hyperCAD/doc/french/samples/createhelix.e3 | 21.50 KB |
| hyperCAD/doc/french/samples/mc_99_04.e3 | 21.50 KB |
| hyperCAD/doc/french/samples/sr_01_03.e3 | 21.50 KB |
| hyperCAD/doc/french/samples/mc_01_04.e3 | 21.50 KB |
| hyperCAD/doc/french/samples/mc_02_04.e3 | 21.00 KB |
| hyperCAD/doc/french/samples/sr0108.e3 | 21.00 KB |
| hyperCAD/doc/french/samples/cv_01_07.e3 | 21.00 KB |
| hyperCAD/doc/french/samples/mc_01_02.e3 | 21.00 KB |
| hyperCAD/doc/french/samples/connect.e3 | 21.00 KB |
| hyperCAD/doc/french/samples/mc_01_08.e3 | 21.00 KB |
| hyperCAD/doc/french/samples/sr0208.e3 | 20.00 KB |
| hyperCAD/doc/french/samples/GM_EX_03.e3 | 19.50 KB |
| hyperCAD/doc/french/samples/designaids_uc_perp.e3 | 19.00 KB |
| hyperCAD/doc/french/samples/GM_EX_02.e3 | 18.50 KB |
| hyperCAD/doc/french/samples/GM_EX_01.e3 | 18.00 KB |
| hyperCAD/doc/french/samples/cv_90_03.e3 | 17.50 KB |
| hyperCAD/doc/french/samples/sr0608.e3 | 17.00 KB |
| hyperCAD/doc/french/samples/mc_01_07.e3 | 16.00 KB |
| hyperCAD/doc/french/samples/to0117.e3 | 14.00 KB |
| hyperCAD/doc/french/samples/hand.jpg | 618 B |
| hyperCAD/doc/french/insthw.chm | 9.05 MB |
| hyperCAD/doc/french/help.chm | 8.71 MB |
| hyperCAD/doc/french/gsm.chm | 5.17 MB |
| hyperCAD/doc/french/solids.chm | 3.25 MB |
| hyperCAD/doc/french/surfaces.chm | 2.95 MB |
| hyperCAD/doc/french/rendering.chm | 2.24 MB |
| hyperCAD/doc/french/forcus.chm | 2.05 MB |
| hyperCAD/doc/french/COMRef1.chm | 1.96 MB |
| hyperCAD/doc/french/COMRef2.chm | 1.79 MB |
| hyperCAD/doc/french/allhhh.xml | 1.15 MB |
| hyperCAD/doc/french/as.chm | 1.15 MB |
| hyperCAD/doc/french/cadenas.chm | 1.14 MB |
| hyperCAD/doc/french/shm.chm | 1.07 MB |
| hyperCAD/doc/french/COMRef4.chm | 1.06 MB |
| hyperCAD/doc/french/dw.chm | 834.28 KB |
| hyperCAD/doc/french/prf.chm | 685.08 KB |
| hyperCAD/doc/french/reshape.chm | 644.06 KB |
| hyperCAD/doc/french/h_index.txt | 579.79 KB |
| hyperCAD/doc/french/draft.chm | 562.82 KB |
| hyperCAD/doc/french/wp.chm | 556.97 KB |
| hyperCAD/doc/french/cnv.chm | 534.95 KB |
| hyperCAD/doc/french/thinkcmp.chm | 525.24 KB |
| hyperCAD/doc/french/dimensio.chm | 525.11 KB |
| hyperCAD/doc/french/thp.chm | 489.05 KB |
| hyperCAD/doc/french/rgpl_61.chm | 486.74 KB |
| hyperCAD/doc/french/Groups.chm | 459.21 KB |
| hyperCAD/doc/french/aixprod.chm | 438.79 KB |
| hyperCAD/doc/french/tubing.chm | 427.11 KB |
| hyperCAD/doc/french/selsna.chm | 422.39 KB |
| hyperCAD/doc/french/DFTB.chm | 378.54 KB |
| hyperCAD/doc/french/la.chm | 348.03 KB |
| hyperCAD/doc/french/COM.chm | 325.02 KB |
| hyperCAD/doc/french/an.chm | 307.96 KB |
| hyperCAD/doc/french/rn_td.chm | 296.70 KB |
| hyperCAD/doc/french/mold.chm | 294.86 KB |
| hyperCAD/doc/french/interact.chm | 287.73 KB |
| hyperCAD/doc/french/transf.chm | 284.07 KB |
| hyperCAD/doc/french/index.idx | 274.67 KB |
| hyperCAD/doc/french/cu.chm | 260.06 KB |
| hyperCAD/doc/french/animate.chm | 245.23 KB |
| hyperCAD/doc/french/sp.chm | 240.47 KB |
| hyperCAD/doc/french/Print.chm | 238.07 KB |
| hyperCAD/doc/french/CapPlay.chm | 198.74 KB |
| hyperCAD/doc/french/COMRef3.chm | 176.28 KB |
| hyperCAD/doc/french/XMLEditor.chm | 173.89 KB |
| hyperCAD/doc/french/cm.chm | 166.15 KB |
| hyperCAD/doc/french/SolidUtilities.chm | 164.66 KB |
| hyperCAD/doc/french/frame.chm | 162.95 KB |
| hyperCAD/doc/french/vb.chm | 155.26 KB |
| hyperCAD/doc/french/ism.chm | 148.19 KB |
| hyperCAD/doc/french/gbplo.chm | 145.59 KB |
| hyperCAD/doc/french/Errman.chm | 145.53 KB |
| hyperCAD/doc/french/welds.chm | 140.95 KB |
| hyperCAD/doc/french/mscr.chm | 138.15 KB |
| hyperCAD/doc/french/UConnect.chm | 121.27 KB |
| hyperCAD/doc/french/layers.chm | 114.03 KB |
| hyperCAD/doc/french/rn_tp.chm | 99.43 KB |
| hyperCAD/doc/french/rn_tt.chm | 98.06 KB |
| hyperCAD/doc/french/chelp.chm | 96.89 KB |
| hyperCAD/doc/french/COMReleaseNotes.chm | 88.27 KB |
| hyperCAD/doc/french/tdein.chm | 82.85 KB |
| hyperCAD/doc/french/bckcmp.chm | 63.57 KB |
| hyperCAD/doc/french/MoveCopy.chm | 58.17 KB |
| hyperCAD/doc/french/HQRE.chm | 51.90 KB |
| hyperCAD/doc/french/pcl.chm | 48.76 KB |
| hyperCAD/doc/french/ce.chm | 44.13 KB |
| hyperCAD/doc/french/cmd.chm | 39.17 KB |
| hyperCAD/doc/french/markup.chm | 35.53 KB |
| hyperCAD/doc/french/inst.chm | 27.67 KB |
| hyperCAD/doc/french/icons.chm | 26.93 KB |
| hyperCAD/doc/french/dxf.chm | 25.24 KB |
| hyperCAD/doc/french/sw.chm | 19.83 KB |
| hyperCAD/doc/french/ansys.chm | 19.50 KB |
| hyperCAD/doc/french/patch01.chm | 18.73 KB |
| hyperCAD/doc/french/fontconverter.chm | 13.44 KB |
| hyperCAD/doc/french/config.idx | 58 B |
| hyperCAD/doc/german/samples/mold/soap_dish_sf2Derived.e3 | 2.88 MB |
| hyperCAD/doc/german/samples/mold/MoldPartDerived.e3 | 542.00 KB |
| hyperCAD/doc/german/samples/mold/soap_dish_sf2.e3 | 514.00 KB |
| hyperCAD/doc/german/samples/mold/cooling.e3 | 107.50 KB |
| hyperCAD/doc/german/samples/mold/soap_dish_assembly1.e3 | 100.50 KB |
| hyperCAD/doc/german/samples/mold/soap_dish_Assembly.e3 | 86.00 KB |
| hyperCAD/doc/german/samples/mold/volume_split.e3 | 60.00 KB |
| hyperCAD/doc/german/samples/mold/Model1.e3 | 58.00 KB |
| hyperCAD/doc/german/samples/mold/Model1Derived.e3 | 56.00 KB |
| hyperCAD/doc/german/samples/mold/electrode.e3 | 54.50 KB |
| hyperCAD/doc/german/samples/mold/Model1Derived-Core-8.e3 | 43.50 KB |
| hyperCAD/doc/german/samples/mold/Model1Derived-Cavity-6.e3 | 27.50 KB |
| hyperCAD/doc/german/samples/pump/plate.e3 | 3.61 MB |
| hyperCAD/doc/german/samples/pump/back_plate.e3 | 298.50 KB |
| hyperCAD/doc/german/samples/pump/housing.e3 | 285.50 KB |
| hyperCAD/doc/german/samples/pump/exp_view_edit.e3 | 270.50 KB |
| hyperCAD/doc/german/samples/pump/exploded_view.e3 | 266.00 KB |
| hyperCAD/doc/german/samples/pump/sleeve.e3 | 247.00 KB |
| hyperCAD/doc/german/samples/pump/shaft.e3 | 213.00 KB |
| hyperCAD/doc/german/samples/pump/pump_exp_view.e3 | 197.50 KB |
| hyperCAD/doc/german/samples/pump/assy_pump.e3 | 196.50 KB |
| hyperCAD/doc/german/samples/pump/assy_pump_derive.e3 | 192.00 KB |
| hyperCAD/doc/german/samples/pump/piston.e3 | 137.50 KB |
| hyperCAD/doc/german/samples/pump/cap.e3 | 92.50 KB |
| hyperCAD/doc/german/samples/pump/support.e3 | 83.50 KB |
| hyperCAD/doc/german/samples/pump/ring.e3 | 64.00 KB |
| hyperCAD/doc/german/samples/pump/m8x80.e3 | 63.50 KB |
| hyperCAD/doc/german/samples/pump/m6x80.e3 | 39.50 KB |
| hyperCAD/doc/german/samples/render/Wheel_Rim.e3 | 4.27 MB |
| hyperCAD/doc/german/samples/render/boat.e3 | 1.70 MB |
| hyperCAD/doc/german/samples/render/environment1.jpg | 78.37 KB |
| hyperCAD/doc/german/samples/samplec.e3 | 5.19 MB |
| hyperCAD/doc/german/samples/crab.e3 | 1.65 MB |
| hyperCAD/doc/german/samples/check_interferences.e3 | 1.50 MB |
| hyperCAD/doc/german/samples/KiteWings.e3 | 1.29 MB |
| hyperCAD/doc/german/samples/make_solid_conditions.e3 | 1.00 MB |
| hyperCAD/doc/german/samples/skin-2.jpg | 810.61 KB |
| hyperCAD/doc/german/samples/GSMH.e3 | 718.50 KB |
| hyperCAD/doc/german/samples/glm_symmetry.e3 | 680.00 KB |
| hyperCAD/doc/german/samples/GRB_Sample_Car.e3 | 678.00 KB |
| hyperCAD/doc/german/samples/Frame_modify.e3 | 464.00 KB |
| hyperCAD/doc/german/samples/section_view.e3 | 455.50 KB |
| hyperCAD/doc/german/samples/Drafter.e3 | 413.50 KB |
| hyperCAD/doc/german/samples/Spined_Twist_Adv.e3 | 361.50 KB |
| hyperCAD/doc/german/samples/VertexRip.e3 | 356.00 KB |
| hyperCAD/doc/german/samples/texture_mod.e3 | 352.50 KB |
| hyperCAD/doc/german/samples/texture_ins.e3 | 351.00 KB |
| hyperCAD/doc/german/samples/Modify_tubing_parts.e3 | 294.00 KB |
| hyperCAD/doc/german/samples/robot.e3 | 258.00 KB |
| hyperCAD/doc/german/samples/tobeunbent1.e3 | 247.50 KB |
| hyperCAD/doc/german/samples/pattern_surface_based.e3 | 244.50 KB |
| hyperCAD/doc/german/samples/Flexible.e3 | 208.50 KB |
| hyperCAD/doc/german/samples/camera.e3 | 189.50 KB |
| hyperCAD/doc/german/samples/Generic_Protursion_Surface.e3 | 184.00 KB |
| hyperCAD/doc/german/samples/Fuzzy_offset.e3 | 179.50 KB |
| hyperCAD/doc/german/samples/a3.e3 | 177.00 KB |
| hyperCAD/doc/german/samples/a1.e3 | 164.00 KB |
| hyperCAD/doc/german/samples/a2.e3 | 161.00 KB |
| hyperCAD/doc/german/samples/walk_through.e3 | 155.00 KB |
| hyperCAD/doc/german/samples/pattern_curve_based.e3 | 149.50 KB |
| hyperCAD/doc/german/samples/thumbwheel.e3 | 148.00 KB |
| hyperCAD/doc/german/samples/Weld_Vbutt.e2 | 140.72 KB |
| hyperCAD/doc/german/samples/base_any_mating.e3 | 140.50 KB |
| hyperCAD/doc/german/samples/RotSweep.e3 | 140.00 KB |
| hyperCAD/doc/german/samples/Generic_Slot_Plane.e3 | 128.00 KB |
| hyperCAD/doc/german/samples/ToBeUnbent.e3 | 125.50 KB |
| hyperCAD/doc/german/samples/Slot_Multi_Profile.e3 | 120.00 KB |
| hyperCAD/doc/german/samples/Super_capping.e3 | 111.50 KB |
| hyperCAD/doc/german/samples/sr0308.e3 | 108.50 KB |
| hyperCAD/doc/german/samples/Assembly.e3 | 103.00 KB |
| hyperCAD/doc/german/samples/Groove.e3 | 99.50 KB |
| hyperCAD/doc/german/samples/Standard_Thread.e3 | 96.50 KB |
| hyperCAD/doc/german/samples/Lip.e3 | 93.00 KB |
| hyperCAD/doc/german/samples/ExtrFla83.e3 | 89.50 KB |
| hyperCAD/doc/german/samples/GlobalReplicate_02.e3 | 87.50 KB |
| hyperCAD/doc/german/samples/basin.e3 | 87.00 KB |
| hyperCAD/doc/german/samples/LReps.e3 | 87.00 KB |
| hyperCAD/doc/german/samples/sib_connecting_rod.e3 | 86.00 KB |
| hyperCAD/doc/german/samples/MSTRPEN.e3 | 85.00 KB |
| hyperCAD/doc/german/samples/skin-1.jpg | 81.10 KB |
| hyperCAD/doc/german/samples/cl_01_01.e3 | 81.00 KB |
| hyperCAD/doc/german/samples/ToBeUnbent2.e3 | 78.50 KB |
| hyperCAD/doc/german/samples/cl_01_06.e3 | 77.50 KB |
| hyperCAD/doc/german/samples/SectionsAlongCurve.e3 | 76.50 KB |
| hyperCAD/doc/german/samples/rebend.e3 | 75.50 KB |
| hyperCAD/doc/german/samples/pivot_arm.e3 | 74.00 KB |
| hyperCAD/doc/german/samples/GlobalReplicate_01.e3 | 74.00 KB |
| hyperCAD/doc/german/samples/RemoveOverlaps+HoleTable.e3 | 72.50 KB |
| hyperCAD/doc/german/samples/rear end cap+body.e3 | 71.00 KB |
| hyperCAD/doc/german/samples/Unbend.e3 | 71.00 KB |
| hyperCAD/doc/german/samples/body_pen.e3 | 71.00 KB |
| hyperCAD/doc/german/samples/step_bend.e3 | 70.50 KB |
| hyperCAD/doc/german/samples/GM_EX_04.e3 | 69.00 KB |
| hyperCAD/doc/german/samples/cut_solid.e3 | 68.00 KB |
| hyperCAD/doc/german/samples/frame_insert.e3 | 64.00 KB |
| hyperCAD/doc/german/samples/radial_guide.e3 | 62.00 KB |
| hyperCAD/doc/german/samples/Rip_Curve_Unbend.e3 | 61.00 KB |
| hyperCAD/doc/german/samples/Mirror_surf.e3 | 60.50 KB |
| hyperCAD/doc/german/samples/Spined_Twist.e3 | 59.50 KB |
| hyperCAD/doc/german/samples/BendOnProfile.e3 | 59.50 KB |
| hyperCAD/doc/german/samples/Generic_Protursion.e3 | 58.50 KB |
| hyperCAD/doc/german/samples/tsmf.e3 | 58.50 KB |
| hyperCAD/doc/german/samples/radial_arm.e3 | 58.50 KB |
| hyperCAD/doc/german/samples/D-BODY-01.e3 | 58.00 KB |
| hyperCAD/doc/german/samples/ToBeBent.e3 | 56.50 KB |
| hyperCAD/doc/german/samples/ExtractSolid_global.e3 | 56.00 KB |
| hyperCAD/doc/german/samples/stilo.e3 | 56.00 KB |
| hyperCAD/doc/german/samples/LIPS.e3 | 56.00 KB |
| hyperCAD/doc/german/samples/sft_t3logo.e3 | 55.50 KB |
| hyperCAD/doc/german/samples/cv010215.e3 | 55.00 KB |
| hyperCAD/doc/german/samples/mirror_mirror.e3 | 55.00 KB |
| hyperCAD/doc/german/samples/gb_limitingcurve.e3 | 54.00 KB |
| hyperCAD/doc/german/samples/Surface_based.e3 | 54.00 KB |
| hyperCAD/doc/german/samples/stilo_blue_double.e3 | 53.50 KB |
| hyperCAD/doc/german/samples/ISM_move_face.e3 | 53.00 KB |
| hyperCAD/doc/german/samples/stilo_blue.e3 | 52.50 KB |
| hyperCAD/doc/german/samples/Associate-scale.e3 | 51.50 KB |
| hyperCAD/doc/german/samples/ISM_offset.e3 | 51.50 KB |
| hyperCAD/doc/german/samples/Edge_Fillet_Hole.e3 | 51.00 KB |
| hyperCAD/doc/german/samples/pivot_guide.e3 | 51.00 KB |
| hyperCAD/doc/german/samples/GlobalSweep01.e3 | 50.00 KB |
| hyperCAD/doc/german/samples/ISM_remove_faces.e3 | 50.00 KB |
| hyperCAD/doc/german/samples/ISM_prop_limits.e3 | 49.50 KB |
| hyperCAD/doc/german/samples/flange_relief.e3 | 49.50 KB |
| hyperCAD/doc/german/samples/globalplanar01.e3 | 49.50 KB |
| hyperCAD/doc/german/samples/spring1.e3 | 49.50 KB |
| hyperCAD/doc/german/samples/cv010315.e3 | 49.00 KB |
| hyperCAD/doc/german/samples/Edge_Fillet_Simple.e3 | 48.50 KB |
| hyperCAD/doc/german/samples/Associative_translation.e3 | 48.00 KB |
| hyperCAD/doc/german/samples/Face_to_face_roll.e3 | 45.50 KB |
| hyperCAD/doc/german/samples/capping.e3 | 45.50 KB |
| hyperCAD/doc/german/samples/a+c.e3 | 45.00 KB |
| hyperCAD/doc/german/samples/Generic_Ruled_Surface.e3 | 45.00 KB |
| hyperCAD/doc/german/samples/pillar_any_mating.e3 | 43.50 KB |
| hyperCAD/doc/german/samples/designaids_uc_tang.e3 | 43.50 KB |
| hyperCAD/doc/german/samples/offset3d.e3 | 43.50 KB |
| hyperCAD/doc/german/samples/D-TIP.e3 | 43.50 KB |
| hyperCAD/doc/german/samples/a+b.e3 | 43.50 KB |
| hyperCAD/doc/german/samples/Face_to_face_fillet.e3 | 42.00 KB |
| hyperCAD/doc/german/samples/ExtractSolid.e3 | 42.00 KB |
| hyperCAD/doc/german/samples/Weld_Vbutt.e3 | 41.50 KB |
| hyperCAD/doc/german/samples/zm.e3 | 41.50 KB |
| hyperCAD/doc/german/samples/Flange83.e3 | 40.00 KB |
| hyperCAD/doc/german/samples/D-BCAP-01.e3 | 40.00 KB |
| hyperCAD/doc/german/samples/IntersectCurve.e3 | 40.00 KB |
| hyperCAD/doc/german/samples/LocalUnion.e3 | 39.50 KB |
| hyperCAD/doc/german/samples/Tube_Welded.e3 | 39.50 KB |
| hyperCAD/doc/german/samples/GRB_Sample.e3 | 39.50 KB |
| hyperCAD/doc/german/samples/peanut.e3 | 39.50 KB |
| hyperCAD/doc/german/samples/Three_profiles_sweep.e3 | 38.50 KB |
| hyperCAD/doc/german/samples/D-BCAP-02.e3 | 38.50 KB |
| hyperCAD/doc/german/samples/alongviewdirection.e3 | 38.50 KB |
| hyperCAD/doc/german/samples/GRB_Sample_TwoModes.e3 | 38.50 KB |
| hyperCAD/doc/german/samples/sketchedrip_points.e3 | 38.00 KB |
| hyperCAD/doc/german/samples/frame_custom.e3 | 38.00 KB |
| hyperCAD/doc/german/samples/tangentplane_srfsrf.e3 | 38.00 KB |
| hyperCAD/doc/german/samples/rear end cap.e3 | 37.50 KB |
| hyperCAD/doc/german/samples/bendonslotprofile.e3 | 37.50 KB |
| hyperCAD/doc/german/samples/fillet-capping.e3 | 36.50 KB |
| hyperCAD/doc/german/samples/IsoparametricPropagation.e3 | 36.50 KB |
| hyperCAD/doc/german/samples/fillet_edges.e3 | 36.50 KB |
| hyperCAD/doc/german/samples/Tubing_parts.e3 | 36.50 KB |
| hyperCAD/doc/german/samples/ConstrSyn.e3 | 36.00 KB |
| hyperCAD/doc/german/samples/pattern_pattern.e3 | 35.50 KB |
| hyperCAD/doc/german/samples/RemoveOverlaps+HoleTable.e2 | 35.00 KB |
| hyperCAD/doc/german/samples/SplitCurve_RuledBoundary.e3 | 35.00 KB |
| hyperCAD/doc/german/samples/surfaceadvancedcontinuity.e3 | 35.00 KB |
| hyperCAD/doc/german/samples/solid_ruled.e3 | 35.00 KB |
| hyperCAD/doc/german/samples/to_14_07.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/cuttingbom.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/Wizard.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/unlink.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/RadialSections.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/offsetsamples.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/solid_single_profile.e3 | 34.50 KB |
| hyperCAD/doc/german/samples/pattern_constant.e3 | 34.00 KB |
| hyperCAD/doc/german/samples/lofted_stretched.e3 | 34.00 KB |
| hyperCAD/doc/german/samples/Continuity3.e3 | 33.50 KB |
| hyperCAD/doc/german/samples/splitwithsilhouette.e3 | 33.50 KB |
| hyperCAD/doc/german/samples/Weld_Fillet.e3 | 33.50 KB |
| hyperCAD/doc/german/samples/Tubing_network_path.e3 | 33.50 KB |
| hyperCAD/doc/german/samples/ISM_selective_closure.e3 | 33.50 KB |
| hyperCAD/doc/german/samples/ExtFlan01.e3 | 33.00 KB |
| hyperCAD/doc/german/samples/trimsurfwithlimits.e3 | 33.00 KB |
| hyperCAD/doc/german/samples/ISM_replace_face.e3 | 33.00 KB |
| hyperCAD/doc/german/samples/sketchedrip.e3 | 33.00 KB |
| hyperCAD/doc/german/samples/to_90_02.e3 | 32.50 KB |
| hyperCAD/doc/german/samples/ms_01_09.e3 | 32.50 KB |
| hyperCAD/doc/german/samples/ISM_scale_copy.e3 | 32.50 KB |
| hyperCAD/doc/german/samples/GRB_Explain.e3 | 32.50 KB |
| hyperCAD/doc/german/samples/LocalDiffInt.e3 | 32.50 KB |
| hyperCAD/doc/german/samples/splitfaces.e3 | 32.00 KB |
| hyperCAD/doc/german/samples/solid_flange.e3 | 32.00 KB |
| hyperCAD/doc/german/samples/D-INK-02.e3 | 32.00 KB |
| hyperCAD/doc/german/samples/handle.e3 | 32.00 KB |
| hyperCAD/doc/german/samples/CappingExistingSurface.e3 | 32.00 KB |
| hyperCAD/doc/german/samples/RakeSweep_ReferenceSurface.e3 | 31.50 KB |
| hyperCAD/doc/german/samples/to0118.e3 | 31.00 KB |
| hyperCAD/doc/german/samples/Angular_Pattern.e2 | 31.00 KB |
| hyperCAD/doc/german/samples/UVSplit.e3 | 30.50 KB |
| hyperCAD/doc/german/samples/spinedfillet.e3 | 30.50 KB |
| hyperCAD/doc/german/samples/lofted_ruled.e3 | 30.50 KB |
| hyperCAD/doc/german/samples/ExtFlan02.e3 | 30.50 KB |
| hyperCAD/doc/german/samples/UVcurve-02.e3 | 30.00 KB |
| hyperCAD/doc/german/samples/spf_constant.e3 | 30.00 KB |
| hyperCAD/doc/german/samples/ISM_closure.e3 | 30.00 KB |
| hyperCAD/doc/german/samples/Continuity_T.e3 | 30.00 KB |
| hyperCAD/doc/german/samples/D-INK-01.e3 | 30.00 KB |
| hyperCAD/doc/german/samples/Continuity2.e3 | 29.50 KB |
| hyperCAD/doc/german/samples/silhouette.e3 | 29.50 KB |
| hyperCAD/doc/german/samples/cv_01_14.e3 | 29.50 KB |
| hyperCAD/doc/german/samples/ExtFlan03.e3 | 29.00 KB |
| hyperCAD/doc/german/samples/cv030415.e3 | 29.00 KB |
| hyperCAD/doc/german/samples/lead.e3 | 29.00 KB |
| hyperCAD/doc/german/samples/needle.e3 | 29.00 KB |
| hyperCAD/doc/german/samples/planardevelopment.e3 | 29.00 KB |
| hyperCAD/doc/german/samples/xx+yy.e3 | 28.50 KB |
| hyperCAD/doc/german/samples/Continuity.e3 | 28.50 KB |
| hyperCAD/doc/german/samples/blendingshape.e3 | 28.50 KB |
| hyperCAD/doc/german/samples/degeneratesurface.e3 | 28.00 KB |
| hyperCAD/doc/german/samples/connect_crv_to_srf.e3 | 28.00 KB |
| hyperCAD/doc/german/samples/VV.e3 | 28.00 KB |
| hyperCAD/doc/german/samples/GSM-SOLID.e3 | 28.00 KB |
| hyperCAD/doc/german/samples/xx.e3 | 28.00 KB |
| hyperCAD/doc/german/samples/solid_from_text.e3 | 27.50 KB |
| hyperCAD/doc/german/samples/bend_continuity.e3 | 27.50 KB |
| hyperCAD/doc/german/samples/yy.e3 | 27.50 KB |
| hyperCAD/doc/german/samples/Weld_Fillet.e2 | 27.50 KB |
| hyperCAD/doc/german/samples/xxxx.e3 | 26.50 KB |
| hyperCAD/doc/german/samples/xxzz.e3 | 26.50 KB |
| hyperCAD/doc/german/samples/draftangle.e3 | 26.00 KB |
| hyperCAD/doc/german/samples/Connect2.e3 | 26.00 KB |
| hyperCAD/doc/german/samples/ThroughPoints.e3 | 25.50 KB |
| hyperCAD/doc/german/samples/cv010415.e3 | 25.00 KB |
| hyperCAD/doc/german/samples/OffsetSurface.e3 | 25.00 KB |
| hyperCAD/doc/german/samples/ms_01_12.e3 | 24.50 KB |
| hyperCAD/doc/german/samples/ThroughCurves.e3 | 24.50 KB |
| hyperCAD/doc/german/samples/bend_constraints.e3 | 24.50 KB |
| hyperCAD/doc/german/samples/extend.e3 | 24.50 KB |
| hyperCAD/doc/german/samples/spsrf_blending.e3 | 24.00 KB |
| hyperCAD/doc/german/samples/CleanCurves.e3 | 24.00 KB |
| hyperCAD/doc/german/samples/pt_07_03.e3 | 24.00 KB |
| hyperCAD/doc/german/samples/yyy.e3 | 24.00 KB |
| hyperCAD/doc/german/samples/spsrf_multi_4.e3 | 23.50 KB |
| hyperCAD/doc/german/samples/sr_01_11.e3 | 23.50 KB |
| hyperCAD/doc/german/samples/capvv.e3 | 23.50 KB |
| hyperCAD/doc/german/samples/cv_01_08.e3 | 23.50 KB |
| hyperCAD/doc/german/samples/makesolid.e3 | 23.50 KB |
| hyperCAD/doc/german/samples/spsrf_multi.e3 | 23.00 KB |
| hyperCAD/doc/german/samples/FreeBoundaries.e3 | 23.00 KB |
| hyperCAD/doc/german/samples/proportional.e3 | 23.00 KB |
| hyperCAD/doc/german/samples/UVcurve.e3 | 23.00 KB |
| hyperCAD/doc/german/samples/RakeSweep.e3 | 23.00 KB |
| hyperCAD/doc/german/samples/pt_07_02.e3 | 23.00 KB |
| hyperCAD/doc/german/samples/tec.e3 | 22.50 KB |
| hyperCAD/doc/german/samples/sr0508.e3 | 22.50 KB |
| hyperCAD/doc/german/samples/spsrf_orientation.e3 | 22.50 KB |
| hyperCAD/doc/german/samples/curveadvancedcontinuity.e3 | 22.50 KB |
| hyperCAD/doc/german/samples/helixsurf.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/sr_01_10.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/pt_07_01.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/GlobalSweep02.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/spsrf_scaling.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/measure_variable.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/spsrf_chain.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/spsrf_1b_1d.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/Ucurve.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/designaids1.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/pipe_drive.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/AdvancedPipe.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/plane_tangent.e3 | 22.00 KB |
| hyperCAD/doc/german/samples/createhelix.e3 | 21.50 KB |
| hyperCAD/doc/german/samples/mc_99_04.e3 | 21.50 KB |
| hyperCAD/doc/german/samples/sr_01_03.e3 | 21.50 KB |
| hyperCAD/doc/german/samples/mc_01_04.e3 | 21.50 KB |
| hyperCAD/doc/german/samples/mc_02_04.e3 | 21.00 KB |
| hyperCAD/doc/german/samples/sr0108.e3 | 21.00 KB |
| hyperCAD/doc/german/samples/cv_01_07.e3 | 21.00 KB |
| hyperCAD/doc/german/samples/mc_01_02.e3 | 21.00 KB |
| hyperCAD/doc/german/samples/connect.e3 | 21.00 KB |
| hyperCAD/doc/german/samples/mc_01_08.e3 | 21.00 KB |
| hyperCAD/doc/german/samples/sr0208.e3 | 20.00 KB |
| hyperCAD/doc/german/samples/GM_EX_03.e3 | 19.50 KB |
| hyperCAD/doc/german/samples/designaids_uc_perp.e3 | 19.00 KB |
| hyperCAD/doc/german/samples/GM_EX_02.e3 | 18.50 KB |
| hyperCAD/doc/german/samples/GM_EX_01.e3 | 18.00 KB |
| hyperCAD/doc/german/samples/cv_90_03.e3 | 17.50 KB |
| hyperCAD/doc/german/samples/sr0608.e3 | 17.00 KB |
| hyperCAD/doc/german/samples/mc_01_07.e3 | 16.00 KB |
| hyperCAD/doc/german/samples/to0117.e3 | 14.00 KB |
| hyperCAD/doc/german/samples/hand.jpg | 618 B |
| hyperCAD/doc/german/insthw.chm | 9.05 MB |
| hyperCAD/doc/german/help.chm | 8.91 MB |
| hyperCAD/doc/german/gsm.chm | 5.25 MB |
| hyperCAD/doc/german/solids.chm | 3.16 MB |
| hyperCAD/doc/german/surfaces.chm | 3.04 MB |
| hyperCAD/doc/german/rendering.chm | 2.24 MB |
| hyperCAD/doc/german/forcus.chm | 2.23 MB |
| hyperCAD/doc/german/COMRef1.chm | 1.96 MB |
| hyperCAD/doc/german/COMRef2.chm | 1.79 MB |
| hyperCAD/doc/german/allhhh.xml | 1.15 MB |
| hyperCAD/doc/german/shm.chm | 1.15 MB |
| hyperCAD/doc/german/as.chm | 1.15 MB |
| hyperCAD/doc/german/cadenas.chm | 1.14 MB |
| hyperCAD/doc/german/COMRef4.chm | 1.06 MB |
| hyperCAD/doc/german/dw.chm | 769.47 KB |
| hyperCAD/doc/german/prf.chm | 699.57 KB |
| hyperCAD/doc/german/reshape.chm | 643.77 KB |
| hyperCAD/doc/german/h_index.txt | 579.79 KB |
| hyperCAD/doc/german/draft.chm | 575.61 KB |
| hyperCAD/doc/german/cnv.chm | 573.37 KB |
| hyperCAD/doc/german/wp.chm | 557.32 KB |
| hyperCAD/doc/german/thp.chm | 554.58 KB |
| hyperCAD/doc/german/thinkcmp.chm | 525.24 KB |
| hyperCAD/doc/german/dimensio.chm | 525.07 KB |
| hyperCAD/doc/german/rgpl_61.chm | 486.74 KB |
| hyperCAD/doc/german/Groups.chm | 460.71 KB |
| hyperCAD/doc/german/selsna.chm | 414.34 KB |
| hyperCAD/doc/german/tubing.chm | 410.98 KB |
| hyperCAD/doc/german/aixprod.chm | 400.19 KB |
| hyperCAD/doc/german/DFTB.chm | 341.88 KB |
| hyperCAD/doc/german/COM.chm | 325.02 KB |
| hyperCAD/doc/german/animate.chm | 313.58 KB |
| hyperCAD/doc/german/mold.chm | 301.41 KB |
| hyperCAD/doc/german/an.chm | 295.55 KB |
| hyperCAD/doc/german/rn_td.chm | 288.40 KB |
| hyperCAD/doc/german/interact.chm | 287.73 KB |
| hyperCAD/doc/german/transf.chm | 284.47 KB |
| hyperCAD/doc/german/la.chm | 278.91 KB |
| hyperCAD/doc/german/index.idx | 274.67 KB |
| hyperCAD/doc/german/sp.chm | 240.47 KB |
| hyperCAD/doc/german/Print.chm | 234.54 KB |
| hyperCAD/doc/german/CapPlay.chm | 231.25 KB |
| hyperCAD/doc/german/cu.chm | 222.46 KB |
| hyperCAD/doc/german/COMRef3.chm | 176.28 KB |
| hyperCAD/doc/german/XMLEditor.chm | 173.89 KB |
| hyperCAD/doc/german/Errman.chm | 172.53 KB |
| hyperCAD/doc/german/frame.chm | 164.23 KB |
| hyperCAD/doc/german/SolidUtilities.chm | 163.85 KB |
| hyperCAD/doc/german/cm.chm | 159.19 KB |
| hyperCAD/doc/german/vb.chm | 157.02 KB |
| hyperCAD/doc/german/gbplo.chm | 153.18 KB |
| hyperCAD/doc/german/ism.chm | 150.91 KB |
| hyperCAD/doc/german/welds.chm | 140.80 KB |
| hyperCAD/doc/german/mscr.chm | 138.10 KB |
| hyperCAD/doc/german/UConnect.chm | 121.27 KB |
| hyperCAD/doc/german/layers.chm | 114.11 KB |
| hyperCAD/doc/german/tdein.chm | 110.41 KB |
| hyperCAD/doc/german/rn_tp.chm | 99.43 KB |
| hyperCAD/doc/german/rn_tt.chm | 98.06 KB |
| hyperCAD/doc/german/chelp.chm | 97.28 KB |
| hyperCAD/doc/german/COMReleaseNotes.chm | 88.27 KB |
| hyperCAD/doc/german/bckcmp.chm | 63.69 KB |
| hyperCAD/doc/german/MoveCopy.chm | 55.79 KB |
| hyperCAD/doc/german/HQRE.chm | 52.90 KB |
| hyperCAD/doc/german/pcl.chm | 48.94 KB |
| hyperCAD/doc/german/ce.chm | 43.83 KB |
| hyperCAD/doc/german/cmd.chm | 39.00 KB |
| hyperCAD/doc/german/markup.chm | 34.78 KB |
| hyperCAD/doc/german/inst.chm | 27.81 KB |
| hyperCAD/doc/german/icons.chm | 25.62 KB |
| hyperCAD/doc/german/dxf.chm | 25.28 KB |
| hyperCAD/doc/german/sw.chm | 19.86 KB |
| hyperCAD/doc/german/ansys.chm | 19.50 KB |
| hyperCAD/doc/german/patch01.chm | 18.73 KB |
| hyperCAD/doc/german/fontconverter.chm | 13.44 KB |
| hyperCAD/doc/german/inst.chw | 10.77 KB |
| hyperCAD/doc/german/config.idx | 58 B |
| hyperCAD/doc/italian/samples/mold/soap_dish_sf2Derived.e3 | 2.88 MB |
| hyperCAD/doc/italian/samples/mold/MoldPartDerived.e3 | 542.00 KB |
| hyperCAD/doc/italian/samples/mold/soap_dish_sf2.e3 | 514.00 KB |
| hyperCAD/doc/italian/samples/mold/cooling.e3 | 107.50 KB |
| hyperCAD/doc/italian/samples/mold/soap_dish_assembly1.e3 | 100.50 KB |
| hyperCAD/doc/italian/samples/mold/soap_dish_Assembly.e3 | 86.00 KB |
| hyperCAD/doc/italian/samples/mold/volume_split.e3 | 60.00 KB |
| hyperCAD/doc/italian/samples/mold/Model1.e3 | 58.00 KB |
| hyperCAD/doc/italian/samples/mold/Model1Derived.e3 | 56.00 KB |
| hyperCAD/doc/italian/samples/mold/electrode.e3 | 54.50 KB |
| hyperCAD/doc/italian/samples/mold/Model1Derived-Core-8.e3 | 43.50 KB |
| hyperCAD/doc/italian/samples/mold/Model1Derived-Cavity-6.e3 | 27.50 KB |
| hyperCAD/doc/italian/samples/pump/plate.e3 | 3.61 MB |
| hyperCAD/doc/italian/samples/pump/back_plate.e3 | 298.50 KB |
| hyperCAD/doc/italian/samples/pump/housing.e3 | 285.50 KB |
| hyperCAD/doc/italian/samples/pump/exp_view_edit.e3 | 270.50 KB |
| hyperCAD/doc/italian/samples/pump/exploded_view.e3 | 266.00 KB |
| hyperCAD/doc/italian/samples/pump/sleeve.e3 | 247.00 KB |
| hyperCAD/doc/italian/samples/pump/shaft.e3 | 213.00 KB |
| hyperCAD/doc/italian/samples/pump/pump_exp_view.e3 | 197.50 KB |
| hyperCAD/doc/italian/samples/pump/assy_pump.e3 | 196.50 KB |
| hyperCAD/doc/italian/samples/pump/assy_pump_derive.e3 | 192.00 KB |
| hyperCAD/doc/italian/samples/pump/piston.e3 | 137.50 KB |
| hyperCAD/doc/italian/samples/pump/cap.e3 | 92.50 KB |
| hyperCAD/doc/italian/samples/pump/support.e3 | 83.50 KB |
| hyperCAD/doc/italian/samples/pump/ring.e3 | 64.00 KB |
| hyperCAD/doc/italian/samples/pump/m8x80.e3 | 63.50 KB |
| hyperCAD/doc/italian/samples/pump/m6x80.e3 | 39.50 KB |
| hyperCAD/doc/italian/samples/render/Wheel_Rim.e3 | 4.27 MB |
| hyperCAD/doc/italian/samples/render/boat.e3 | 1.70 MB |
| hyperCAD/doc/italian/samples/render/environment1.jpg | 78.37 KB |
| hyperCAD/doc/italian/samples/samplec.e3 | 5.19 MB |
| hyperCAD/doc/italian/samples/crab.e3 | 1.65 MB |
| hyperCAD/doc/italian/samples/check_interferences.e3 | 1.50 MB |
| hyperCAD/doc/italian/samples/KiteWings.e3 | 1.29 MB |
| hyperCAD/doc/italian/samples/make_solid_conditions.e3 | 1.00 MB |
| hyperCAD/doc/italian/samples/skin-2.jpg | 810.61 KB |
| hyperCAD/doc/italian/samples/GSMH.e3 | 718.50 KB |
| hyperCAD/doc/italian/samples/glm_symmetry.e3 | 680.00 KB |
| hyperCAD/doc/italian/samples/GRB_Sample_Car.e3 | 678.00 KB |
| hyperCAD/doc/italian/samples/Frame_modify.e3 | 464.00 KB |
| hyperCAD/doc/italian/samples/section_view.e3 | 455.50 KB |
| hyperCAD/doc/italian/samples/Drafter.e3 | 413.50 KB |
| hyperCAD/doc/italian/samples/Spined_Twist_Adv.e3 | 361.50 KB |
| hyperCAD/doc/italian/samples/VertexRip.e3 | 356.00 KB |
| hyperCAD/doc/italian/samples/texture_mod.e3 | 352.50 KB |
| hyperCAD/doc/italian/samples/texture_ins.e3 | 351.00 KB |
| hyperCAD/doc/italian/samples/Modify_tubing_parts.e3 | 294.00 KB |
| hyperCAD/doc/italian/samples/robot.e3 | 258.00 KB |
| hyperCAD/doc/italian/samples/tobeunbent1.e3 | 247.50 KB |
| hyperCAD/doc/italian/samples/pattern_surface_based.e3 | 244.50 KB |
| hyperCAD/doc/italian/samples/Flexible.e3 | 208.50 KB |
| hyperCAD/doc/italian/samples/camera.e3 | 189.50 KB |
| hyperCAD/doc/italian/samples/Generic_Protursion_Surface.e3 | 184.00 KB |
| hyperCAD/doc/italian/samples/Fuzzy_offset.e3 | 179.50 KB |
| hyperCAD/doc/italian/samples/a3.e3 | 177.00 KB |
| hyperCAD/doc/italian/samples/a1.e3 | 164.00 KB |
| hyperCAD/doc/italian/samples/a2.e3 | 161.00 KB |
| hyperCAD/doc/italian/samples/walk_through.e3 | 155.00 KB |
| hyperCAD/doc/italian/samples/pattern_curve_based.e3 | 149.50 KB |
| hyperCAD/doc/italian/samples/thumbwheel.e3 | 148.00 KB |
| hyperCAD/doc/italian/samples/Weld_Vbutt.e2 | 140.72 KB |
| hyperCAD/doc/italian/samples/base_any_mating.e3 | 140.50 KB |
| hyperCAD/doc/italian/samples/RotSweep.e3 | 140.00 KB |
| hyperCAD/doc/italian/samples/Generic_Slot_Plane.e3 | 128.00 KB |
| hyperCAD/doc/italian/samples/ToBeUnbent.e3 | 125.50 KB |
| hyperCAD/doc/italian/samples/Slot_Multi_Profile.e3 | 120.00 KB |
| hyperCAD/doc/italian/samples/Super_capping.e3 | 111.50 KB |
| hyperCAD/doc/italian/samples/sr0308.e3 | 108.50 KB |
| hyperCAD/doc/italian/samples/Assembly.e3 | 103.00 KB |
| hyperCAD/doc/italian/samples/Groove.e3 | 99.50 KB |
| hyperCAD/doc/italian/samples/Standard_Thread.e3 | 96.50 KB |
| hyperCAD/doc/italian/samples/Lip.e3 | 93.00 KB |
| hyperCAD/doc/italian/samples/ExtrFla83.e3 | 89.50 KB |
| hyperCAD/doc/italian/samples/GlobalReplicate_02.e3 | 87.50 KB |
| hyperCAD/doc/italian/samples/basin.e3 | 87.00 KB |
| hyperCAD/doc/italian/samples/LReps.e3 | 87.00 KB |
| hyperCAD/doc/italian/samples/sib_connecting_rod.e3 | 86.00 KB |
| hyperCAD/doc/italian/samples/MSTRPEN.e3 | 85.00 KB |
| hyperCAD/doc/italian/samples/skin-1.jpg | 81.10 KB |
| hyperCAD/doc/italian/samples/cl_01_01.e3 | 81.00 KB |
| hyperCAD/doc/italian/samples/ToBeUnbent2.e3 | 78.50 KB |
| hyperCAD/doc/italian/samples/cl_01_06.e3 | 77.50 KB |
| hyperCAD/doc/italian/samples/SectionsAlongCurve.e3 | 76.50 KB |
| hyperCAD/doc/italian/samples/rebend.e3 | 75.50 KB |
| hyperCAD/doc/italian/samples/pivot_arm.e3 | 74.00 KB |
| hyperCAD/doc/italian/samples/GlobalReplicate_01.e3 | 74.00 KB |
| hyperCAD/doc/italian/samples/RemoveOverlaps+HoleTable.e3 | 72.50 KB |
| hyperCAD/doc/italian/samples/rear end cap+body.e3 | 71.00 KB |
| hyperCAD/doc/italian/samples/Unbend.e3 | 71.00 KB |
| hyperCAD/doc/italian/samples/body_pen.e3 | 71.00 KB |
| hyperCAD/doc/italian/samples/step_bend.e3 | 70.50 KB |
| hyperCAD/doc/italian/samples/GM_EX_04.e3 | 69.00 KB |
| hyperCAD/doc/italian/samples/cut_solid.e3 | 68.00 KB |
| hyperCAD/doc/italian/samples/frame_insert.e3 | 64.00 KB |
| hyperCAD/doc/italian/samples/radial_guide.e3 | 62.00 KB |
| hyperCAD/doc/italian/samples/Rip_Curve_Unbend.e3 | 61.00 KB |
| hyperCAD/doc/italian/samples/Mirror_surf.e3 | 60.50 KB |
| hyperCAD/doc/italian/samples/Spined_Twist.e3 | 59.50 KB |
| hyperCAD/doc/italian/samples/BendOnProfile.e3 | 59.50 KB |
| hyperCAD/doc/italian/samples/Generic_Protursion.e3 | 58.50 KB |
| hyperCAD/doc/italian/samples/tsmf.e3 | 58.50 KB |
| hyperCAD/doc/italian/samples/radial_arm.e3 | 58.50 KB |
| hyperCAD/doc/italian/samples/D-BODY-01.e3 | 58.00 KB |
| hyperCAD/doc/italian/samples/ToBeBent.e3 | 56.50 KB |
| hyperCAD/doc/italian/samples/ExtractSolid_global.e3 | 56.00 KB |
| hyperCAD/doc/italian/samples/stilo.e3 | 56.00 KB |
| hyperCAD/doc/italian/samples/LIPS.e3 | 56.00 KB |
| hyperCAD/doc/italian/samples/sft_t3logo.e3 | 55.50 KB |
| hyperCAD/doc/italian/samples/cv010215.e3 | 55.00 KB |
| hyperCAD/doc/italian/samples/mirror_mirror.e3 | 55.00 KB |
| hyperCAD/doc/italian/samples/gb_limitingcurve.e3 | 54.00 KB |
| hyperCAD/doc/italian/samples/Surface_based.e3 | 54.00 KB |
| hyperCAD/doc/italian/samples/stilo_blue_double.e3 | 53.50 KB |
| hyperCAD/doc/italian/samples/ISM_move_face.e3 | 53.00 KB |
| hyperCAD/doc/italian/samples/stilo_blue.e3 | 52.50 KB |
| hyperCAD/doc/italian/samples/Associate-scale.e3 | 51.50 KB |
| hyperCAD/doc/italian/samples/ISM_offset.e3 | 51.50 KB |
| hyperCAD/doc/italian/samples/Edge_Fillet_Hole.e3 | 51.00 KB |
| hyperCAD/doc/italian/samples/pivot_guide.e3 | 51.00 KB |
| hyperCAD/doc/italian/samples/GlobalSweep01.e3 | 50.00 KB |
| hyperCAD/doc/italian/samples/ISM_remove_faces.e3 | 50.00 KB |
| hyperCAD/doc/italian/samples/ISM_prop_limits.e3 | 49.50 KB |
| hyperCAD/doc/italian/samples/flange_relief.e3 | 49.50 KB |
| hyperCAD/doc/italian/samples/globalplanar01.e3 | 49.50 KB |
| hyperCAD/doc/italian/samples/spring1.e3 | 49.50 KB |
| hyperCAD/doc/italian/samples/cv010315.e3 | 49.00 KB |
| hyperCAD/doc/italian/samples/Edge_Fillet_Simple.e3 | 48.50 KB |
| hyperCAD/doc/italian/samples/Associative_translation.e3 | 48.00 KB |
| hyperCAD/doc/italian/samples/Face_to_face_roll.e3 | 45.50 KB |
| hyperCAD/doc/italian/samples/capping.e3 | 45.50 KB |
| hyperCAD/doc/italian/samples/a+c.e3 | 45.00 KB |
| hyperCAD/doc/italian/samples/Generic_Ruled_Surface.e3 | 45.00 KB |
| hyperCAD/doc/italian/samples/pillar_any_mating.e3 | 43.50 KB |
| hyperCAD/doc/italian/samples/designaids_uc_tang.e3 | 43.50 KB |
| hyperCAD/doc/italian/samples/offset3d.e3 | 43.50 KB |
| hyperCAD/doc/italian/samples/D-TIP.e3 | 43.50 KB |
| hyperCAD/doc/italian/samples/a+b.e3 | 43.50 KB |
| hyperCAD/doc/italian/samples/Face_to_face_fillet.e3 | 42.00 KB |
| hyperCAD/doc/italian/samples/ExtractSolid.e3 | 42.00 KB |
| hyperCAD/doc/italian/samples/Weld_Vbutt.e3 | 41.50 KB |
| hyperCAD/doc/italian/samples/zm.e3 | 41.50 KB |
| hyperCAD/doc/italian/samples/Flange83.e3 | 40.00 KB |
| hyperCAD/doc/italian/samples/D-BCAP-01.e3 | 40.00 KB |
| hyperCAD/doc/italian/samples/IntersectCurve.e3 | 40.00 KB |
| hyperCAD/doc/italian/samples/LocalUnion.e3 | 39.50 KB |
| hyperCAD/doc/italian/samples/Tube_Welded.e3 | 39.50 KB |
| hyperCAD/doc/italian/samples/GRB_Sample.e3 | 39.50 KB |
| hyperCAD/doc/italian/samples/peanut.e3 | 39.50 KB |
| hyperCAD/doc/italian/samples/Three_profiles_sweep.e3 | 38.50 KB |
| hyperCAD/doc/italian/samples/D-BCAP-02.e3 | 38.50 KB |
| hyperCAD/doc/italian/samples/alongviewdirection.e3 | 38.50 KB |
| hyperCAD/doc/italian/samples/GRB_Sample_TwoModes.e3 | 38.50 KB |
| hyperCAD/doc/italian/samples/sketchedrip_points.e3 | 38.00 KB |
| hyperCAD/doc/italian/samples/frame_custom.e3 | 38.00 KB |
| hyperCAD/doc/italian/samples/tangentplane_srfsrf.e3 | 38.00 KB |
| hyperCAD/doc/italian/samples/rear end cap.e3 | 37.50 KB |
| hyperCAD/doc/italian/samples/bendonslotprofile.e3 | 37.50 KB |
| hyperCAD/doc/italian/samples/fillet-capping.e3 | 36.50 KB |
| hyperCAD/doc/italian/samples/IsoparametricPropagation.e3 | 36.50 KB |
| hyperCAD/doc/italian/samples/fillet_edges.e3 | 36.50 KB |
| hyperCAD/doc/italian/samples/Tubing_parts.e3 | 36.50 KB |
| hyperCAD/doc/italian/samples/ConstrSyn.e3 | 36.00 KB |
| hyperCAD/doc/italian/samples/pattern_pattern.e3 | 35.50 KB |
| hyperCAD/doc/italian/samples/RemoveOverlaps+HoleTable.e2 | 35.00 KB |
| hyperCAD/doc/italian/samples/SplitCurve_RuledBoundary.e3 | 35.00 KB |
| hyperCAD/doc/italian/samples/surfaceadvancedcontinuity.e3 | 35.00 KB |
| hyperCAD/doc/italian/samples/solid_ruled.e3 | 35.00 KB |
| hyperCAD/doc/italian/samples/to_14_07.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/cuttingbom.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/Wizard.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/unlink.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/RadialSections.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/offsetsamples.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/solid_single_profile.e3 | 34.50 KB |
| hyperCAD/doc/italian/samples/pattern_constant.e3 | 34.00 KB |
| hyperCAD/doc/italian/samples/lofted_stretched.e3 | 34.00 KB |
| hyperCAD/doc/italian/samples/Continuity3.e3 | 33.50 KB |
| hyperCAD/doc/italian/samples/splitwithsilhouette.e3 | 33.50 KB |
| hyperCAD/doc/italian/samples/Weld_Fillet.e3 | 33.50 KB |
| hyperCAD/doc/italian/samples/Tubing_network_path.e3 | 33.50 KB |
| hyperCAD/doc/italian/samples/ISM_selective_closure.e3 | 33.50 KB |
| hyperCAD/doc/italian/samples/ExtFlan01.e3 | 33.00 KB |
| hyperCAD/doc/italian/samples/trimsurfwithlimits.e3 | 33.00 KB |
| hyperCAD/doc/italian/samples/ISM_replace_face.e3 | 33.00 KB |
| hyperCAD/doc/italian/samples/sketchedrip.e3 | 33.00 KB |
| hyperCAD/doc/italian/samples/to_90_02.e3 | 32.50 KB |
| hyperCAD/doc/italian/samples/ms_01_09.e3 | 32.50 KB |
| hyperCAD/doc/italian/samples/ISM_scale_copy.e3 | 32.50 KB |
| hyperCAD/doc/italian/samples/GRB_Explain.e3 | 32.50 KB |
| hyperCAD/doc/italian/samples/LocalDiffInt.e3 | 32.50 KB |
| hyperCAD/doc/italian/samples/splitfaces.e3 | 32.00 KB |
| hyperCAD/doc/italian/samples/solid_flange.e3 | 32.00 KB |
| hyperCAD/doc/italian/samples/D-INK-02.e3 | 32.00 KB |
| hyperCAD/doc/italian/samples/handle.e3 | 32.00 KB |
| hyperCAD/doc/italian/samples/CappingExistingSurface.e3 | 32.00 KB |
| hyperCAD/doc/italian/samples/RakeSweep_ReferenceSurface.e3 | 31.50 KB |
| hyperCAD/doc/italian/samples/to0118.e3 | 31.00 KB |
| hyperCAD/doc/italian/samples/Angular_Pattern.e2 | 31.00 KB |
| hyperCAD/doc/italian/samples/UVSplit.e3 | 30.50 KB |
| hyperCAD/doc/italian/samples/spinedfillet.e3 | 30.50 KB |
| hyperCAD/doc/italian/samples/lofted_ruled.e3 | 30.50 KB |
| hyperCAD/doc/italian/samples/ExtFlan02.e3 | 30.50 KB |
| hyperCAD/doc/italian/samples/UVcurve-02.e3 | 30.00 KB |
| hyperCAD/doc/italian/samples/spf_constant.e3 | 30.00 KB |
| hyperCAD/doc/italian/samples/ISM_closure.e3 | 30.00 KB |
| hyperCAD/doc/italian/samples/Continuity_T.e3 | 30.00 KB |
| hyperCAD/doc/italian/samples/D-INK-01.e3 | 30.00 KB |
| hyperCAD/doc/italian/samples/Continuity2.e3 | 29.50 KB |
| hyperCAD/doc/italian/samples/silhouette.e3 | 29.50 KB |
| hyperCAD/doc/italian/samples/cv_01_14.e3 | 29.50 KB |
| hyperCAD/doc/italian/samples/ExtFlan03.e3 | 29.00 KB |
| hyperCAD/doc/italian/samples/cv030415.e3 | 29.00 KB |
| hyperCAD/doc/italian/samples/lead.e3 | 29.00 KB |
| hyperCAD/doc/italian/samples/needle.e3 | 29.00 KB |
| hyperCAD/doc/italian/samples/planardevelopment.e3 | 29.00 KB |
| hyperCAD/doc/italian/samples/xx+yy.e3 | 28.50 KB |
| hyperCAD/doc/italian/samples/Continuity.e3 | 28.50 KB |
| hyperCAD/doc/italian/samples/blendingshape.e3 | 28.50 KB |
| hyperCAD/doc/italian/samples/degeneratesurface.e3 | 28.00 KB |
| hyperCAD/doc/italian/samples/connect_crv_to_srf.e3 | 28.00 KB |
| hyperCAD/doc/italian/samples/VV.e3 | 28.00 KB |
| hyperCAD/doc/italian/samples/GSM-SOLID.e3 | 28.00 KB |
| hyperCAD/doc/italian/samples/xx.e3 | 28.00 KB |
| hyperCAD/doc/italian/samples/solid_from_text.e3 | 27.50 KB |
| hyperCAD/doc/italian/samples/bend_continuity.e3 | 27.50 KB |
| hyperCAD/doc/italian/samples/yy.e3 | 27.50 KB |
| hyperCAD/doc/italian/samples/Weld_Fillet.e2 | 27.50 KB |
| hyperCAD/doc/italian/samples/xxxx.e3 | 26.50 KB |
| hyperCAD/doc/italian/samples/xxzz.e3 | 26.50 KB |
| hyperCAD/doc/italian/samples/draftangle.e3 | 26.00 KB |
| hyperCAD/doc/italian/samples/Connect2.e3 | 26.00 KB |
| hyperCAD/doc/italian/samples/ThroughPoints.e3 | 25.50 KB |
| hyperCAD/doc/italian/samples/cv010415.e3 | 25.00 KB |
| hyperCAD/doc/italian/samples/OffsetSurface.e3 | 25.00 KB |
| hyperCAD/doc/italian/samples/ms_01_12.e3 | 24.50 KB |
| hyperCAD/doc/italian/samples/ThroughCurves.e3 | 24.50 KB |
| hyperCAD/doc/italian/samples/bend_constraints.e3 | 24.50 KB |
| hyperCAD/doc/italian/samples/extend.e3 | 24.50 KB |
| hyperCAD/doc/italian/samples/spsrf_blending.e3 | 24.00 KB |
| hyperCAD/doc/italian/samples/CleanCurves.e3 | 24.00 KB |
| hyperCAD/doc/italian/samples/pt_07_03.e3 | 24.00 KB |
| hyperCAD/doc/italian/samples/yyy.e3 | 24.00 KB |
| hyperCAD/doc/italian/samples/spsrf_multi_4.e3 | 23.50 KB |
| hyperCAD/doc/italian/samples/sr_01_11.e3 | 23.50 KB |
| hyperCAD/doc/italian/samples/capvv.e3 | 23.50 KB |
| hyperCAD/doc/italian/samples/cv_01_08.e3 | 23.50 KB |
| hyperCAD/doc/italian/samples/makesolid.e3 | 23.50 KB |
| hyperCAD/doc/italian/samples/spsrf_multi.e3 | 23.00 KB |
| hyperCAD/doc/italian/samples/FreeBoundaries.e3 | 23.00 KB |
| hyperCAD/doc/italian/samples/proportional.e3 | 23.00 KB |
| hyperCAD/doc/italian/samples/UVcurve.e3 | 23.00 KB |
| hyperCAD/doc/italian/samples/RakeSweep.e3 | 23.00 KB |
| hyperCAD/doc/italian/samples/pt_07_02.e3 | 23.00 KB |
| hyperCAD/doc/italian/samples/tec.e3 | 22.50 KB |
| hyperCAD/doc/italian/samples/sr0508.e3 | 22.50 KB |
| hyperCAD/doc/italian/samples/spsrf_orientation.e3 | 22.50 KB |
| hyperCAD/doc/italian/samples/curveadvancedcontinuity.e3 | 22.50 KB |
| hyperCAD/doc/italian/samples/helixsurf.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/sr_01_10.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/pt_07_01.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/GlobalSweep02.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/spsrf_scaling.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/measure_variable.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/spsrf_chain.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/spsrf_1b_1d.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/Ucurve.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/designaids1.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/pipe_drive.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/AdvancedPipe.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/plane_tangent.e3 | 22.00 KB |
| hyperCAD/doc/italian/samples/createhelix.e3 | 21.50 KB |
| hyperCAD/doc/italian/samples/mc_99_04.e3 | 21.50 KB |
| hyperCAD/doc/italian/samples/sr_01_03.e3 | 21.50 KB |
| hyperCAD/doc/italian/samples/mc_01_04.e3 | 21.50 KB |
| hyperCAD/doc/italian/samples/mc_02_04.e3 | 21.00 KB |
| hyperCAD/doc/italian/samples/sr0108.e3 | 21.00 KB |
| hyperCAD/doc/italian/samples/cv_01_07.e3 | 21.00 KB |
| hyperCAD/doc/italian/samples/mc_01_02.e3 | 21.00 KB |
| hyperCAD/doc/italian/samples/connect.e3 | 21.00 KB |
| hyperCAD/doc/italian/samples/mc_01_08.e3 | 21.00 KB |
| hyperCAD/doc/italian/samples/sr0208.e3 | 20.00 KB |
| hyperCAD/doc/italian/samples/GM_EX_03.e3 | 19.50 KB |
| hyperCAD/doc/italian/samples/designaids_uc_perp.e3 | 19.00 KB |
| hyperCAD/doc/italian/samples/GM_EX_02.e3 | 18.50 KB |
| hyperCAD/doc/italian/samples/GM_EX_01.e3 | 18.00 KB |
| hyperCAD/doc/italian/samples/cv_90_03.e3 | 17.50 KB |
| hyperCAD/doc/italian/samples/sr0608.e3 | 17.00 KB |
| hyperCAD/doc/italian/samples/mc_01_07.e3 | 16.00 KB |
| hyperCAD/doc/italian/samples/to0117.e3 | 14.00 KB |
| hyperCAD/doc/italian/samples/hand.jpg | 618 B |
| hyperCAD/doc/italian/insthw.chm | 9.05 MB |
| hyperCAD/doc/italian/help.chm | 8.66 MB |
| hyperCAD/doc/italian/gsm.chm | 4.95 MB |
| hyperCAD/doc/italian/solids.chm | 3.16 MB |
| hyperCAD/doc/italian/surfaces.chm | 2.69 MB |
| hyperCAD/doc/italian/rendering.chm | 2.24 MB |
| hyperCAD/doc/italian/forcus.chm | 2.07 MB |
| hyperCAD/doc/italian/COMRef1.chm | 1.96 MB |
| hyperCAD/doc/italian/COMRef2.chm | 1.79 MB |
| hyperCAD/doc/italian/allhhh.xml | 1.16 MB |
| hyperCAD/doc/italian/cadenas.chm | 1.14 MB |
| hyperCAD/doc/italian/as.chm | 1.08 MB |
| hyperCAD/doc/italian/shm.chm | 1.06 MB |
| hyperCAD/doc/italian/COMRef4.chm | 1.06 MB |
| hyperCAD/doc/italian/dw.chm | 736.86 KB |
| hyperCAD/doc/italian/prf.chm | 664.92 KB |
| hyperCAD/doc/italian/reshape.chm | 643.45 KB |
| hyperCAD/doc/italian/h_index.txt | 579.79 KB |
| hyperCAD/doc/italian/wp.chm | 551.81 KB |
| hyperCAD/doc/italian/cnv.chm | 536.82 KB |
| hyperCAD/doc/italian/draft.chm | 534.50 KB |
| hyperCAD/doc/italian/thinkcmp.chm | 525.24 KB |
| hyperCAD/doc/italian/dimensio.chm | 507.98 KB |
| hyperCAD/doc/italian/thp.chm | 499.81 KB |
| hyperCAD/doc/italian/rgpl_61.chm | 486.74 KB |
| hyperCAD/doc/italian/Groups.chm | 427.94 KB |
| hyperCAD/doc/italian/tubing.chm | 427.94 KB |
| hyperCAD/doc/italian/selsna.chm | 398.86 KB |
| hyperCAD/doc/italian/help.chw | 392.96 KB |
| hyperCAD/doc/italian/aixprod.chm | 387.29 KB |
| hyperCAD/doc/italian/DFTB.chm | 361.23 KB |
| hyperCAD/doc/italian/la.chm | 349.65 KB |
| hyperCAD/doc/italian/COM.chm | 325.02 KB |
| hyperCAD/doc/italian/an.chm | 310.56 KB |
| hyperCAD/doc/italian/rn_td.chm | 299.11 KB |
| hyperCAD/doc/italian/cu.chm | 295.90 KB |
| hyperCAD/doc/italian/mold.chm | 292.74 KB |
| hyperCAD/doc/italian/interact.chm | 287.73 KB |
| hyperCAD/doc/italian/transf.chm | 282.72 KB |
| hyperCAD/doc/italian/index.idx | 274.67 KB |
| hyperCAD/doc/italian/sp.chm | 240.22 KB |
| hyperCAD/doc/italian/CapPlay.chm | 212.05 KB |
| hyperCAD/doc/italian/Print.chm | 208.44 KB |
| hyperCAD/doc/italian/animate.chm | 205.09 KB |
| hyperCAD/doc/italian/COMRef3.chm | 176.28 KB |
| hyperCAD/doc/italian/XMLEditor.chm | 173.89 KB |
| hyperCAD/doc/italian/cm.chm | 162.96 KB |
| hyperCAD/doc/italian/frame.chm | 160.75 KB |
| hyperCAD/doc/italian/SolidUtilities.chm | 156.32 KB |
| hyperCAD/doc/italian/ism.chm | 144.82 KB |
| hyperCAD/doc/italian/Errman.chm | 143.33 KB |
| hyperCAD/doc/italian/welds.chm | 141.79 KB |
| hyperCAD/doc/italian/vb.chm | 140.92 KB |
| hyperCAD/doc/italian/gbplo.chm | 139.03 KB |
| hyperCAD/doc/italian/mscr.chm | 138.95 KB |
| hyperCAD/doc/italian/UConnect.chm | 121.27 KB |
| hyperCAD/doc/italian/layers.chm | 105.56 KB |
| hyperCAD/doc/italian/chelp.chm | 95.43 KB |
| hyperCAD/doc/italian/COMReleaseNotes.chm | 88.27 KB |
| hyperCAD/doc/italian/tdein.chm | 82.02 KB |
| hyperCAD/doc/italian/bckcmp.chm | 63.85 KB |
| hyperCAD/doc/italian/MoveCopy.chm | 55.06 KB |
| hyperCAD/doc/italian/HQRE.chm | 52.09 KB |
| hyperCAD/doc/italian/pcl.chm | 48.37 KB |
| hyperCAD/doc/italian/ce.chm | 44.34 KB |
| hyperCAD/doc/italian/cmd.chm | 38.56 KB |
| hyperCAD/doc/italian/markup.chm | 34.56 KB |
| hyperCAD/doc/italian/inst.chm | 27.82 KB |
| hyperCAD/doc/italian/dxf.chm | 25.20 KB |
| hyperCAD/doc/italian/icons.chm | 23.18 KB |
| hyperCAD/doc/italian/sw.chm | 19.94 KB |
| hyperCAD/doc/italian/ansys.chm | 19.50 KB |
| hyperCAD/doc/italian/patch01.chm | 18.73 KB |
| hyperCAD/doc/italian/fontconverter.chm | 13.44 KB |
| hyperCAD/doc/italian/config.idx | 58 B |
| hyperCAD/doc/japanese/samples/mold/soap_dish_sf2Derived.e3 | 2.88 MB |
| hyperCAD/doc/japanese/samples/mold/MoldPartDerived.e3 | 542.00 KB |
| hyperCAD/doc/japanese/samples/mold/soap_dish_sf2.e3 | 514.00 KB |
| hyperCAD/doc/japanese/samples/mold/cooling.e3 | 107.50 KB |
| hyperCAD/doc/japanese/samples/mold/soap_dish_assembly1.e3 | 100.50 KB |
| hyperCAD/doc/japanese/samples/mold/soap_dish_Assembly.e3 | 86.00 KB |
| hyperCAD/doc/japanese/samples/mold/volume_split.e3 | 60.00 KB |
| hyperCAD/doc/japanese/samples/mold/Model1.e3 | 58.00 KB |
| hyperCAD/doc/japanese/samples/mold/Model1Derived.e3 | 56.00 KB |
| hyperCAD/doc/japanese/samples/mold/electrode.e3 | 54.50 KB |
| hyperCAD/doc/japanese/samples/mold/Model1Derived-Core-8.e3 | 43.50 KB |
| hyperCAD/doc/japanese/samples/mold/Model1Derived-Cavity-6.e3 | 27.50 KB |
| hyperCAD/doc/japanese/samples/pump/plate.e3 | 3.61 MB |
| hyperCAD/doc/japanese/samples/pump/back_plate.e3 | 298.50 KB |
| hyperCAD/doc/japanese/samples/pump/housing.e3 | 285.50 KB |
| hyperCAD/doc/japanese/samples/pump/exp_view_edit.e3 | 270.50 KB |
| hyperCAD/doc/japanese/samples/pump/exploded_view.e3 | 266.00 KB |
| hyperCAD/doc/japanese/samples/pump/sleeve.e3 | 247.00 KB |
| hyperCAD/doc/japanese/samples/pump/shaft.e3 | 213.00 KB |
| hyperCAD/doc/japanese/samples/pump/pump_exp_view.e3 | 197.50 KB |
| hyperCAD/doc/japanese/samples/pump/assy_pump.e3 | 196.50 KB |
| hyperCAD/doc/japanese/samples/pump/assy_pump_derive.e3 | 192.00 KB |
| hyperCAD/doc/japanese/samples/pump/piston.e3 | 137.50 KB |
| hyperCAD/doc/japanese/samples/pump/cap.e3 | 92.50 KB |
| hyperCAD/doc/japanese/samples/pump/support.e3 | 83.50 KB |
| hyperCAD/doc/japanese/samples/pump/ring.e3 | 64.00 KB |
| hyperCAD/doc/japanese/samples/pump/m8x80.e3 | 63.50 KB |
| hyperCAD/doc/japanese/samples/pump/m6x80.e3 | 39.50 KB |
| hyperCAD/doc/japanese/samples/render/Wheel_Rim.e3 | 4.27 MB |
| hyperCAD/doc/japanese/samples/render/boat.e3 | 1.70 MB |
| hyperCAD/doc/japanese/samples/render/environment1.jpg | 78.37 KB |
| hyperCAD/doc/japanese/samples/samplec.e3 | 5.19 MB |
| hyperCAD/doc/japanese/samples/crab.e3 | 1.65 MB |
| hyperCAD/doc/japanese/samples/check_interferences.e3 | 1.50 MB |
| hyperCAD/doc/japanese/samples/KiteWings.e3 | 1.29 MB |
| hyperCAD/doc/japanese/samples/make_solid_conditions.e3 | 1.00 MB |
| hyperCAD/doc/japanese/samples/skin-2.jpg | 810.61 KB |
| hyperCAD/doc/japanese/samples/GSMH.e3 | 718.50 KB |
| hyperCAD/doc/japanese/samples/glm_symmetry.e3 | 680.00 KB |
| hyperCAD/doc/japanese/samples/GRB_Sample_Car.e3 | 678.00 KB |
| hyperCAD/doc/japanese/samples/Frame_modify.e3 | 464.00 KB |
| hyperCAD/doc/japanese/samples/section_view.e3 | 455.50 KB |
| hyperCAD/doc/japanese/samples/Drafter.e3 | 413.50 KB |
| hyperCAD/doc/japanese/samples/Spined_Twist_Adv.e3 | 361.50 KB |
| hyperCAD/doc/japanese/samples/VertexRip.e3 | 356.00 KB |
| hyperCAD/doc/japanese/samples/texture_mod.e3 | 352.50 KB |
| hyperCAD/doc/japanese/samples/texture_ins.e3 | 351.00 KB |
| hyperCAD/doc/japanese/samples/Modify_tubing_parts.e3 | 294.00 KB |
| hyperCAD/doc/japanese/samples/robot.e3 | 258.00 KB |
| hyperCAD/doc/japanese/samples/tobeunbent1.e3 | 247.50 KB |
| hyperCAD/doc/japanese/samples/pattern_surface_based.e3 | 244.50 KB |
| hyperCAD/doc/japanese/samples/Flexible.e3 | 208.50 KB |
| hyperCAD/doc/japanese/samples/camera.e3 | 189.50 KB |
| hyperCAD/doc/japanese/samples/Generic_Protursion_Surface.e3 | 184.00 KB |
| hyperCAD/doc/japanese/samples/Fuzzy_offset.e3 | 179.50 KB |
| hyperCAD/doc/japanese/samples/a3.e3 | 177.00 KB |
| hyperCAD/doc/japanese/samples/a1.e3 | 164.00 KB |
| hyperCAD/doc/japanese/samples/a2.e3 | 161.00 KB |
| hyperCAD/doc/japanese/samples/walk_through.e3 | 155.00 KB |
| hyperCAD/doc/japanese/samples/pattern_curve_based.e3 | 149.50 KB |
| hyperCAD/doc/japanese/samples/thumbwheel.e3 | 148.00 KB |
| hyperCAD/doc/japanese/samples/Weld_Vbutt.e2 | 140.72 KB |
| hyperCAD/doc/japanese/samples/base_any_mating.e3 | 140.50 KB |
| hyperCAD/doc/japanese/samples/RotSweep.e3 | 140.00 KB |
| hyperCAD/doc/japanese/samples/Generic_Slot_Plane.e3 | 128.00 KB |
| hyperCAD/doc/japanese/samples/ToBeUnbent.e3 | 125.50 KB |
| hyperCAD/doc/japanese/samples/Slot_Multi_Profile.e3 | 120.00 KB |
| hyperCAD/doc/japanese/samples/Super_capping.e3 | 111.50 KB |
| hyperCAD/doc/japanese/samples/sr0308.e3 | 108.50 KB |
| hyperCAD/doc/japanese/samples/Assembly.e3 | 103.00 KB |
| hyperCAD/doc/japanese/samples/Groove.e3 | 99.50 KB |
| hyperCAD/doc/japanese/samples/Standard_Thread.e3 | 96.50 KB |
| hyperCAD/doc/japanese/samples/Lip.e3 | 93.00 KB |
| hyperCAD/doc/japanese/samples/ExtrFla83.e3 | 89.50 KB |
| hyperCAD/doc/japanese/samples/GlobalReplicate_02.e3 | 87.50 KB |
| hyperCAD/doc/japanese/samples/basin.e3 | 87.00 KB |
| hyperCAD/doc/japanese/samples/LReps.e3 | 87.00 KB |
| hyperCAD/doc/japanese/samples/sib_connecting_rod.e3 | 86.00 KB |
| hyperCAD/doc/japanese/samples/MSTRPEN.e3 | 85.00 KB |
| hyperCAD/doc/japanese/samples/skin-1.jpg | 81.10 KB |
| hyperCAD/doc/japanese/samples/cl_01_01.e3 | 81.00 KB |
| hyperCAD/doc/japanese/samples/ToBeUnbent2.e3 | 78.50 KB |
| hyperCAD/doc/japanese/samples/cl_01_06.e3 | 77.50 KB |
| hyperCAD/doc/japanese/samples/SectionsAlongCurve.e3 | 76.50 KB |
| hyperCAD/doc/japanese/samples/rebend.e3 | 75.50 KB |
| hyperCAD/doc/japanese/samples/pivot_arm.e3 | 74.00 KB |
| hyperCAD/doc/japanese/samples/GlobalReplicate_01.e3 | 74.00 KB |
| hyperCAD/doc/japanese/samples/RemoveOverlaps+HoleTable.e3 | 72.50 KB |
| hyperCAD/doc/japanese/samples/rear end cap+body.e3 | 71.00 KB |
| hyperCAD/doc/japanese/samples/Unbend.e3 | 71.00 KB |
| hyperCAD/doc/japanese/samples/body_pen.e3 | 71.00 KB |
| hyperCAD/doc/japanese/samples/step_bend.e3 | 70.50 KB |
| hyperCAD/doc/japanese/samples/GM_EX_04.e3 | 69.00 KB |
| hyperCAD/doc/japanese/samples/cut_solid.e3 | 68.00 KB |
| hyperCAD/doc/japanese/samples/frame_insert.e3 | 64.00 KB |
| hyperCAD/doc/japanese/samples/radial_guide.e3 | 62.00 KB |
| hyperCAD/doc/japanese/samples/Rip_Curve_Unbend.e3 | 61.00 KB |
| hyperCAD/doc/japanese/samples/Mirror_surf.e3 | 60.50 KB |
| hyperCAD/doc/japanese/samples/Spined_Twist.e3 | 59.50 KB |
| hyperCAD/doc/japanese/samples/BendOnProfile.e3 | 59.50 KB |
| hyperCAD/doc/japanese/samples/Generic_Protursion.e3 | 58.50 KB |
| hyperCAD/doc/japanese/samples/tsmf.e3 | 58.50 KB |
| hyperCAD/doc/japanese/samples/radial_arm.e3 | 58.50 KB |
| hyperCAD/doc/japanese/samples/D-BODY-01.e3 | 58.00 KB |
| hyperCAD/doc/japanese/samples/ToBeBent.e3 | 56.50 KB |
| hyperCAD/doc/japanese/samples/ExtractSolid_global.e3 | 56.00 KB |
| hyperCAD/doc/japanese/samples/stilo.e3 | 56.00 KB |
| hyperCAD/doc/japanese/samples/LIPS.e3 | 56.00 KB |
| hyperCAD/doc/japanese/samples/sft_t3logo.e3 | 55.50 KB |
| hyperCAD/doc/japanese/samples/cv010215.e3 | 55.00 KB |
| hyperCAD/doc/japanese/samples/mirror_mirror.e3 | 55.00 KB |
| hyperCAD/doc/japanese/samples/gb_limitingcurve.e3 | 54.00 KB |
| hyperCAD/doc/japanese/samples/Surface_based.e3 | 54.00 KB |
| hyperCAD/doc/japanese/samples/stilo_blue_double.e3 | 53.50 KB |
| hyperCAD/doc/japanese/samples/ISM_move_face.e3 | 53.00 KB |
| hyperCAD/doc/japanese/samples/stilo_blue.e3 | 52.50 KB |
| hyperCAD/doc/japanese/samples/Associate-scale.e3 | 51.50 KB |
| hyperCAD/doc/japanese/samples/ISM_offset.e3 | 51.50 KB |
| hyperCAD/doc/japanese/samples/Edge_Fillet_Hole.e3 | 51.00 KB |
| hyperCAD/doc/japanese/samples/pivot_guide.e3 | 51.00 KB |
| hyperCAD/doc/japanese/samples/GlobalSweep01.e3 | 50.00 KB |
| hyperCAD/doc/japanese/samples/ISM_remove_faces.e3 | 50.00 KB |
| hyperCAD/doc/japanese/samples/ISM_prop_limits.e3 | 49.50 KB |
| hyperCAD/doc/japanese/samples/flange_relief.e3 | 49.50 KB |
| hyperCAD/doc/japanese/samples/globalplanar01.e3 | 49.50 KB |
| hyperCAD/doc/japanese/samples/spring1.e3 | 49.50 KB |
| hyperCAD/doc/japanese/samples/cv010315.e3 | 49.00 KB |
| hyperCAD/doc/japanese/samples/Edge_Fillet_Simple.e3 | 48.50 KB |
| hyperCAD/doc/japanese/samples/Associative_translation.e3 | 48.00 KB |
| hyperCAD/doc/japanese/samples/Face_to_face_roll.e3 | 45.50 KB |
| hyperCAD/doc/japanese/samples/capping.e3 | 45.50 KB |
| hyperCAD/doc/japanese/samples/a+c.e3 | 45.00 KB |
| hyperCAD/doc/japanese/samples/Generic_Ruled_Surface.e3 | 45.00 KB |
| hyperCAD/doc/japanese/samples/pillar_any_mating.e3 | 43.50 KB |
| hyperCAD/doc/japanese/samples/designaids_uc_tang.e3 | 43.50 KB |
| hyperCAD/doc/japanese/samples/offset3d.e3 | 43.50 KB |
| hyperCAD/doc/japanese/samples/D-TIP.e3 | 43.50 KB |
| hyperCAD/doc/japanese/samples/a+b.e3 | 43.50 KB |
| hyperCAD/doc/japanese/samples/Face_to_face_fillet.e3 | 42.00 KB |
| hyperCAD/doc/japanese/samples/ExtractSolid.e3 | 42.00 KB |
| hyperCAD/doc/japanese/samples/Weld_Vbutt.e3 | 41.50 KB |
| hyperCAD/doc/japanese/samples/zm.e3 | 41.50 KB |
| hyperCAD/doc/japanese/samples/Flange83.e3 | 40.00 KB |
| hyperCAD/doc/japanese/samples/D-BCAP-01.e3 | 40.00 KB |
| hyperCAD/doc/japanese/samples/IntersectCurve.e3 | 40.00 KB |
| hyperCAD/doc/japanese/samples/LocalUnion.e3 | 39.50 KB |
| hyperCAD/doc/japanese/samples/Tube_Welded.e3 | 39.50 KB |
| hyperCAD/doc/japanese/samples/GRB_Sample.e3 | 39.50 KB |
| hyperCAD/doc/japanese/samples/peanut.e3 | 39.50 KB |
| hyperCAD/doc/japanese/samples/Three_profiles_sweep.e3 | 38.50 KB |
| hyperCAD/doc/japanese/samples/D-BCAP-02.e3 | 38.50 KB |
| hyperCAD/doc/japanese/samples/alongviewdirection.e3 | 38.50 KB |
| hyperCAD/doc/japanese/samples/GRB_Sample_TwoModes.e3 | 38.50 KB |
| hyperCAD/doc/japanese/samples/sketchedrip_points.e3 | 38.00 KB |
| hyperCAD/doc/japanese/samples/frame_custom.e3 | 38.00 KB |
| hyperCAD/doc/japanese/samples/tangentplane_srfsrf.e3 | 38.00 KB |
| hyperCAD/doc/japanese/samples/rear end cap.e3 | 37.50 KB |
| hyperCAD/doc/japanese/samples/bendonslotprofile.e3 | 37.50 KB |
| hyperCAD/doc/japanese/samples/fillet-capping.e3 | 36.50 KB |
| hyperCAD/doc/japanese/samples/IsoparametricPropagation.e3 | 36.50 KB |
| hyperCAD/doc/japanese/samples/fillet_edges.e3 | 36.50 KB |
| hyperCAD/doc/japanese/samples/Tubing_parts.e3 | 36.50 KB |
| hyperCAD/doc/japanese/samples/ConstrSyn.e3 | 36.00 KB |
| hyperCAD/doc/japanese/samples/pattern_pattern.e3 | 35.50 KB |
| hyperCAD/doc/japanese/samples/RemoveOverlaps+HoleTable.e2 | 35.00 KB |
| hyperCAD/doc/japanese/samples/SplitCurve_RuledBoundary.e3 | 35.00 KB |
| hyperCAD/doc/japanese/samples/surfaceadvancedcontinuity.e3 | 35.00 KB |
| hyperCAD/doc/japanese/samples/solid_ruled.e3 | 35.00 KB |
| hyperCAD/doc/japanese/samples/to_14_07.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/cuttingbom.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/Wizard.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/unlink.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/RadialSections.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/offsetsamples.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/solid_single_profile.e3 | 34.50 KB |
| hyperCAD/doc/japanese/samples/pattern_constant.e3 | 34.00 KB |
| hyperCAD/doc/japanese/samples/lofted_stretched.e3 | 34.00 KB |
| hyperCAD/doc/japanese/samples/Continuity3.e3 | 33.50 KB |
| hyperCAD/doc/japanese/samples/splitwithsilhouette.e3 | 33.50 KB |
| hyperCAD/doc/japanese/samples/Weld_Fillet.e3 | 33.50 KB |
| hyperCAD/doc/japanese/samples/Tubing_network_path.e3 | 33.50 KB |
| hyperCAD/doc/japanese/samples/ISM_selective_closure.e3 | 33.50 KB |
| hyperCAD/doc/japanese/samples/ExtFlan01.e3 | 33.00 KB |
| hyperCAD/doc/japanese/samples/trimsurfwithlimits.e3 | 33.00 KB |
| hyperCAD/doc/japanese/samples/ISM_replace_face.e3 | 33.00 KB |
| hyperCAD/doc/japanese/samples/sketchedrip.e3 | 33.00 KB |
| hyperCAD/doc/japanese/samples/to_90_02.e3 | 32.50 KB |
| hyperCAD/doc/japanese/samples/ms_01_09.e3 | 32.50 KB |
| hyperCAD/doc/japanese/samples/ISM_scale_copy.e3 | 32.50 KB |
| hyperCAD/doc/japanese/samples/GRB_Explain.e3 | 32.50 KB |
| hyperCAD/doc/japanese/samples/LocalDiffInt.e3 | 32.50 KB |
| hyperCAD/doc/japanese/samples/splitfaces.e3 | 32.00 KB |
| hyperCAD/doc/japanese/samples/solid_flange.e3 | 32.00 KB |
| hyperCAD/doc/japanese/samples/D-INK-02.e3 | 32.00 KB |
| hyperCAD/doc/japanese/samples/handle.e3 | 32.00 KB |
| hyperCAD/doc/japanese/samples/CappingExistingSurface.e3 | 32.00 KB |
| hyperCAD/doc/japanese/samples/RakeSweep_ReferenceSurface.e3 | 31.50 KB |
| hyperCAD/doc/japanese/samples/to0118.e3 | 31.00 KB |
| hyperCAD/doc/japanese/samples/Angular_Pattern.e2 | 31.00 KB |
| hyperCAD/doc/japanese/samples/UVSplit.e3 | 30.50 KB |
| hyperCAD/doc/japanese/samples/spinedfillet.e3 | 30.50 KB |
| hyperCAD/doc/japanese/samples/lofted_ruled.e3 | 30.50 KB |
| hyperCAD/doc/japanese/samples/ExtFlan02.e3 | 30.50 KB |
| hyperCAD/doc/japanese/samples/UVcurve-02.e3 | 30.00 KB |
| hyperCAD/doc/japanese/samples/spf_constant.e3 | 30.00 KB |
| hyperCAD/doc/japanese/samples/ISM_closure.e3 | 30.00 KB |
| hyperCAD/doc/japanese/samples/Continuity_T.e3 | 30.00 KB |
| hyperCAD/doc/japanese/samples/D-INK-01.e3 | 30.00 KB |
| hyperCAD/doc/japanese/samples/Continuity2.e3 | 29.50 KB |
| hyperCAD/doc/japanese/samples/silhouette.e3 | 29.50 KB |
| hyperCAD/doc/japanese/samples/cv_01_14.e3 | 29.50 KB |
| hyperCAD/doc/japanese/samples/ExtFlan03.e3 | 29.00 KB |
| hyperCAD/doc/japanese/samples/cv030415.e3 | 29.00 KB |
| hyperCAD/doc/japanese/samples/lead.e3 | 29.00 KB |
| hyperCAD/doc/japanese/samples/needle.e3 | 29.00 KB |
| hyperCAD/doc/japanese/samples/planardevelopment.e3 | 29.00 KB |
| hyperCAD/doc/japanese/samples/xx+yy.e3 | 28.50 KB |
| hyperCAD/doc/japanese/samples/Continuity.e3 | 28.50 KB |
| hyperCAD/doc/japanese/samples/blendingshape.e3 | 28.50 KB |
| hyperCAD/doc/japanese/samples/degeneratesurface.e3 | 28.00 KB |
| hyperCAD/doc/japanese/samples/connect_crv_to_srf.e3 | 28.00 KB |
| hyperCAD/doc/japanese/samples/VV.e3 | 28.00 KB |
| hyperCAD/doc/japanese/samples/GSM-SOLID.e3 | 28.00 KB |
| hyperCAD/doc/japanese/samples/xx.e3 | 28.00 KB |
| hyperCAD/doc/japanese/samples/solid_from_text.e3 | 27.50 KB |
| hyperCAD/doc/japanese/samples/bend_continuity.e3 | 27.50 KB |
| hyperCAD/doc/japanese/samples/yy.e3 | 27.50 KB |
| hyperCAD/doc/japanese/samples/Weld_Fillet.e2 | 27.50 KB |
| hyperCAD/doc/japanese/samples/xxxx.e3 | 26.50 KB |
| hyperCAD/doc/japanese/samples/xxzz.e3 | 26.50 KB |
| hyperCAD/doc/japanese/samples/draftangle.e3 | 26.00 KB |
| hyperCAD/doc/japanese/samples/Connect2.e3 | 26.00 KB |
| hyperCAD/doc/japanese/samples/ThroughPoints.e3 | 25.50 KB |
| hyperCAD/doc/japanese/samples/cv010415.e3 | 25.00 KB |
| hyperCAD/doc/japanese/samples/OffsetSurface.e3 | 25.00 KB |
| hyperCAD/doc/japanese/samples/ms_01_12.e3 | 24.50 KB |
| hyperCAD/doc/japanese/samples/ThroughCurves.e3 | 24.50 KB |
| hyperCAD/doc/japanese/samples/bend_constraints.e3 | 24.50 KB |
| hyperCAD/doc/japanese/samples/extend.e3 | 24.50 KB |
| hyperCAD/doc/japanese/samples/spsrf_blending.e3 | 24.00 KB |
| hyperCAD/doc/japanese/samples/CleanCurves.e3 | 24.00 KB |
| hyperCAD/doc/japanese/samples/pt_07_03.e3 | 24.00 KB |
| hyperCAD/doc/japanese/samples/yyy.e3 | 24.00 KB |
| hyperCAD/doc/japanese/samples/spsrf_multi_4.e3 | 23.50 KB |
| hyperCAD/doc/japanese/samples/sr_01_11.e3 | 23.50 KB |
| hyperCAD/doc/japanese/samples/capvv.e3 | 23.50 KB |
| hyperCAD/doc/japanese/samples/cv_01_08.e3 | 23.50 KB |
| hyperCAD/doc/japanese/samples/makesolid.e3 | 23.50 KB |
| hyperCAD/doc/japanese/samples/spsrf_multi.e3 | 23.00 KB |
| hyperCAD/doc/japanese/samples/FreeBoundaries.e3 | 23.00 KB |
| hyperCAD/doc/japanese/samples/proportional.e3 | 23.00 KB |
| hyperCAD/doc/japanese/samples/UVcurve.e3 | 23.00 KB |
| hyperCAD/doc/japanese/samples/RakeSweep.e3 | 23.00 KB |
| hyperCAD/doc/japanese/samples/pt_07_02.e3 | 23.00 KB |
| hyperCAD/doc/japanese/samples/tec.e3 | 22.50 KB |
| hyperCAD/doc/japanese/samples/sr0508.e3 | 22.50 KB |
| hyperCAD/doc/japanese/samples/spsrf_orientation.e3 | 22.50 KB |
| hyperCAD/doc/japanese/samples/curveadvancedcontinuity.e3 | 22.50 KB |
| hyperCAD/doc/japanese/samples/helixsurf.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/sr_01_10.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/pt_07_01.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/GlobalSweep02.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/spsrf_scaling.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/measure_variable.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/spsrf_chain.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/spsrf_1b_1d.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/Ucurve.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/designaids1.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/pipe_drive.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/AdvancedPipe.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/plane_tangent.e3 | 22.00 KB |
| hyperCAD/doc/japanese/samples/createhelix.e3 | 21.50 KB |
| hyperCAD/doc/japanese/samples/mc_99_04.e3 | 21.50 KB |
| hyperCAD/doc/japanese/samples/sr_01_03.e3 | 21.50 KB |
| hyperCAD/doc/japanese/samples/mc_01_04.e3 | 21.50 KB |
| hyperCAD/doc/japanese/samples/mc_02_04.e3 | 21.00 KB |
| hyperCAD/doc/japanese/samples/sr0108.e3 | 21.00 KB |
| hyperCAD/doc/japanese/samples/cv_01_07.e3 | 21.00 KB |
| hyperCAD/doc/japanese/samples/mc_01_02.e3 | 21.00 KB |
| hyperCAD/doc/japanese/samples/connect.e3 | 21.00 KB |
| hyperCAD/doc/japanese/samples/mc_01_08.e3 | 21.00 KB |
| hyperCAD/doc/japanese/samples/sr0208.e3 | 20.00 KB |
| hyperCAD/doc/japanese/samples/GM_EX_03.e3 | 19.50 KB |
| hyperCAD/doc/japanese/samples/designaids_uc_perp.e3 | 19.00 KB |
| hyperCAD/doc/japanese/samples/GM_EX_02.e3 | 18.50 KB |
| hyperCAD/doc/japanese/samples/GM_EX_01.e3 | 18.00 KB |
| hyperCAD/doc/japanese/samples/cv_90_03.e3 | 17.50 KB |
| hyperCAD/doc/japanese/samples/sr0608.e3 | 17.00 KB |
| hyperCAD/doc/japanese/samples/mc_01_07.e3 | 16.00 KB |
| hyperCAD/doc/japanese/samples/to0117.e3 | 14.00 KB |
| hyperCAD/doc/japanese/samples/hand.jpg | 618 B |
| hyperCAD/doc/japanese/insthw.chm | 9.05 MB |
| hyperCAD/doc/japanese/help.chm | 8.57 MB |
| hyperCAD/doc/japanese/gsm.chm | 5.16 MB |
| hyperCAD/doc/japanese/solids.chm | 3.08 MB |
| hyperCAD/doc/japanese/surfaces.chm | 2.80 MB |
| hyperCAD/doc/japanese/rendering.chm | 2.23 MB |
| hyperCAD/doc/japanese/forcus.chm | 2.09 MB |
| hyperCAD/doc/japanese/COMRef1.chm | 1.96 MB |
| hyperCAD/doc/japanese/COMRef2.chm | 1.79 MB |
| hyperCAD/doc/japanese/allhhh.xml | 1.16 MB |
| hyperCAD/doc/japanese/cadenas.chm | 1.14 MB |
| hyperCAD/doc/japanese/as.chm | 1.10 MB |
| hyperCAD/doc/japanese/shm.chm | 1.06 MB |
| hyperCAD/doc/japanese/COMRef4.chm | 1.06 MB |
| hyperCAD/doc/japanese/dw.chm | 713.02 KB |
| hyperCAD/doc/japanese/prf.chm | 688.11 KB |
| hyperCAD/doc/japanese/reshape.chm | 644.45 KB |
| hyperCAD/doc/japanese/h_index.txt | 579.79 KB |
| hyperCAD/doc/japanese/cnv.chm | 563.90 KB |
| hyperCAD/doc/japanese/wp.chm | 559.28 KB |
| hyperCAD/doc/japanese/thinkcmp.chm | 522.30 KB |
| hyperCAD/doc/japanese/draft.chm | 520.41 KB |
| hyperCAD/doc/japanese/dimensio.chm | 514.64 KB |
| hyperCAD/doc/japanese/thp.chm | 487.10 KB |
| hyperCAD/doc/japanese/rgpl_61.chm | 486.74 KB |
| hyperCAD/doc/japanese/Groups.chm | 411.87 KB |
| hyperCAD/doc/japanese/tubing.chm | 402.77 KB |
| hyperCAD/doc/japanese/selsna.chm | 397.57 KB |
| hyperCAD/doc/japanese/aixprod.chm | 390.16 KB |
| hyperCAD/doc/japanese/DFTB.chm | 338.57 KB |
| hyperCAD/doc/japanese/COM.chm | 325.02 KB |
| hyperCAD/doc/japanese/rn_td.chm | 300.05 KB |
| hyperCAD/doc/japanese/mold.chm | 297.57 KB |
| hyperCAD/doc/japanese/interact.chm | 295.50 KB |
| hyperCAD/doc/japanese/transf.chm | 287.61 KB |
| hyperCAD/doc/japanese/index.idx | 274.67 KB |
| hyperCAD/doc/japanese/la.chm | 272.14 KB |
| hyperCAD/doc/japanese/an.chm | 269.44 KB |
| hyperCAD/doc/japanese/sp.chm | 240.47 KB |
| hyperCAD/doc/japanese/UConnect.chm | 220.36 KB |
| hyperCAD/doc/japanese/Print.chm | 213.96 KB |
| hyperCAD/doc/japanese/animate.chm | 211.58 KB |
| hyperCAD/doc/japanese/cu.chm | 208.23 KB |
| hyperCAD/doc/japanese/COMRef3.chm | 176.28 KB |
| hyperCAD/doc/japanese/XMLEditor.chm | 173.89 KB |
| hyperCAD/doc/japanese/Errman.chm | 161.59 KB |
| hyperCAD/doc/japanese/frame.chm | 160.09 KB |
| hyperCAD/doc/japanese/gbplo.chm | 153.59 KB |
| hyperCAD/doc/japanese/SolidUtilities.chm | 151.07 KB |
| hyperCAD/doc/japanese/CapPlay.chm | 147.31 KB |
| hyperCAD/doc/japanese/ism.chm | 144.32 KB |
| hyperCAD/doc/japanese/vb.chm | 142.74 KB |
| hyperCAD/doc/japanese/welds.chm | 142.03 KB |
| hyperCAD/doc/japanese/mscr.chm | 137.98 KB |
| hyperCAD/doc/japanese/cm.chm | 131.71 KB |
| hyperCAD/doc/japanese/tdein.chm | 127.06 KB |
| hyperCAD/doc/japanese/Layers.chm | 120.61 KB |
| hyperCAD/doc/japanese/rn_tp.chm | 99.43 KB |
| hyperCAD/doc/japanese/chelp.chm | 98.46 KB |
| hyperCAD/doc/japanese/rn_tt.chm | 98.06 KB |
| hyperCAD/doc/japanese/COMReleaseNotes.chm | 88.27 KB |
| hyperCAD/doc/japanese/bckcmp.chm | 66.07 KB |
| hyperCAD/doc/japanese/MoveCopy.chm | 52.80 KB |
| hyperCAD/doc/japanese/HQRE.chm | 52.09 KB |
| hyperCAD/doc/japanese/pcl.chm | 48.31 KB |
| hyperCAD/doc/japanese/ce.chm | 43.68 KB |
| hyperCAD/doc/japanese/cmd.chm | 41.16 KB |
| hyperCAD/doc/japanese/markup.chm | 34.67 KB |
| hyperCAD/doc/japanese/inst.chm | 28.97 KB |
| hyperCAD/doc/japanese/dxf.chm | 25.62 KB |
| hyperCAD/doc/japanese/icons.chm | 25.59 KB |
| hyperCAD/doc/japanese/sw.chm | 20.68 KB |
| hyperCAD/doc/japanese/ansys.chm | 19.50 KB |
| hyperCAD/doc/japanese/patch01.chm | 18.73 KB |
| hyperCAD/doc/japanese/fontconverter.chm | 13.44 KB |
| hyperCAD/doc/japanese/config.idx | 58 B |
| hyperCAD/data2.cab | 614.17 MB |
| hyperCAD/data1.cab | 10.56 MB |
| hyperCAD/Tools20093.exe | 3.53 MB |
| hyperCAD/spanish_langugae_pack.zip | 3.24 MB |
| hyperCAD/russian-language-pack.zip | 2.95 MB |
| hyperCAD/data1.hdr | 1.22 MB |
| hyperCAD/ISSetup.dll | 523.00 KB |
| hyperCAD/setup.exe | 364.00 KB |
| hyperCAD/_Setup.dll | 324.95 KB |
| hyperCAD/setup.inx | 306.32 KB |
| hyperCAD/layout.bin | 20.79 KB |
| hyperCAD/setup.ini | 582 B |
| hyperMILL/Documentation/Chinese (simplified)/hyperMILL.pdf | 57.28 MB |
| hyperMILL/Documentation/Chinese (traditional)/hyperMILL.pdf | 57.99 MB |
| hyperMILL/Documentation/Czech/hyperMILL.pdf | 58.61 MB |
| hyperMILL/Documentation/Dutch/hyperMILL.pdf | 58.26 MB |
| hyperMILL/Documentation/English/hyperMILL.pdf | 57.99 MB |
| hyperMILL/Documentation/French/hyperMILL.pdf | 58.38 MB |
| hyperMILL/Documentation/German/hyperMILL.pdf | 58.63 MB |
| hyperMILL/Documentation/Italian/hyperMILL.pdf | 58.33 MB |
| hyperMILL/Documentation/Japanese/hyperMILL.pdf | 57.39 MB |
| hyperMILL/Documentation/Korean/hyperMILL.pdf | 57.41 MB |
| hyperMILL/Documentation/Polish/hyperMILL.pdf | 58.15 MB |
| hyperMILL/Documentation/Portuguese/hyperMILL.pdf | 58.43 MB |
| hyperMILL/Documentation/Russian/hyperMILL.pdf | 58.53 MB |
| hyperMILL/Documentation/Slovenian/hyperMILL.pdf | 57.99 MB |
| hyperMILL/Documentation/Spanish/hyperMILL.pdf | 58.39 MB |
| hyperMILL/{083C49A2-A8BB-4826-9393-F249C75315DC}/hyperMILL 2014.1 Documentation Package French.msi | 106.52 MB |
| hyperMILL/{0BE9572E-8558-404f-B0A5-8C347D145655}/vcredist_x86.exe | 4.02 MB |
| hyperMILL/{19A0F1B0-ADDA-4C80-A437-4BD696082F05}/hyperMILL 2014.1 Documentation Package German.msi | 105.52 MB |
| hyperMILL/{3EC9AF85-71D0-4699-8417-275182D7DAF8}/hyperMILL 2014.1 Documentation Package Japanese.msi | 103.61 MB |
| hyperMILL/{41C6E124-B6B2-4F0B-844E-9D44E9F60108}/hyperMILL 2014.1 Documentation Package Spanish.msi | 105.15 MB |
| hyperMILL/{492EF016-30A8-4D39-8A62-EF85941618B8}/hyperMILL 2014.1 Documentation Package Portuguese.msi | 105.24 MB |
| hyperMILL/{4EE45210-1CA7-45B5-9861-CAACF87F9848}/hyperMILL 2014.1 Documentation Package Polish.msi | 104.91 MB |
| hyperMILL/{51FFBCF8-B3E7-4478-B697-91135C299CA8}/hyperMILL 2014.1 Documentation Package Italian.msi | 106.55 MB |
| hyperMILL/{609E84BC-FCB1-4A1F-B898-8950750EAE39}/dotnetfx35setup.exe | 2.82 MB |
| hyperMILL/{609E84BC-FCB1-4A1F-B898-8950750EAE39}/Helper.exe | 125.46 KB |
| hyperMILL/{6B502E9E-20B2-45FA-A84A-1A8811FBFA71}/hyperMILL 2014.1 Documentation Package Korean.msi | 103.68 MB |
| hyperMILL/{7f66a156-bc3b-479d-9703-65db354235cc}/vcredist_x64.exe | 5.41 MB |
| hyperMILL/{8034C99E-3BC0-4E53-BC6E-02E3D8CF5379}/vcredist_x86.exe | 2.58 MB |
| hyperMILL/{814FB0F9-09EC-43ED-8D2A-809D743A3721}/hyperMILL 2014.1 Documentation Package Slovenian.msi | 104.70 MB |
| hyperMILL/{8D61397C-2AD6-4210-8E43-C2793010DC35}/vcredist_x64.exe | 4.73 MB |
| hyperMILL/{A0E5D322-F6DF-463A-BE10-0B351A348538}/hyperMILL 2014.1 Documentation Package Dutch.msi | 106.36 MB |
| hyperMILL/{A64C63A6-CA4B-47FB-9ACB-4C245AC47B5D}/hyperMILL 2014.1 Documentation Package Chinese Traditional.msi | 111.46 MB |
| hyperMILL/{AB23F163-BDF7-4FF7-A1D1-8B0B850ABFA7}/hyperCAD-S 2014.1.msi | 618.91 MB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/hyperMILL 2014.1.msi | 549.03 MB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1031.mst | 332.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1049.mst | 152.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1041.mst | 140.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1042.mst | 128.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1040.mst | 120.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1034.mst | 120.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1036.mst | 120.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1045.mst | 116.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1043.mst | 116.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1046.mst | 116.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1029.mst | 116.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1060.mst | 112.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1028.mst | 104.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/2052.mst | 100.00 KB |
| hyperMILL/{B379BA85-678E-41A4-B1BA-EA55C5366147}/1033.mst | 28.00 KB |
| hyperMILL/{b53018b3-1b31-47a5-ad4f-6eb7086d6009}/vcredist_x64.exe | 3.03 MB |
| hyperMILL/{B9E391C7-10C5-48EE-87D0-A0542A194302}/hyperMILL 2014.1 Documentation Package Czech.msi | 105.36 MB |
| hyperMILL/{C035B176-5AB7-4743-B39A-DB23A4794D53}/CodeMeterRuntime.exe | 22.48 MB |
| hyperMILL/{C58BF4B9-1623-43A5-8EC4-CF500C058BDB}/hyperMILL 2014.1 Documentation Package Russian.msi | 106.53 MB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/hyperMILL 2014.1 License Manager.msi | 2.14 MB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1036.mst | 120.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1031.mst | 120.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1034.mst | 120.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1040.mst | 120.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1041.mst | 116.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1043.mst | 116.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1060.mst | 112.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1045.mst | 112.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1046.mst | 112.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1029.mst | 108.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1042.mst | 108.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1049.mst | 108.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/2052.mst | 88.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1028.mst | 88.00 KB |
| hyperMILL/{CA4E7701-9C35-4E5E-8B29-99CF4E8C2E4C}/1033.mst | 28.00 KB |
| hyperMILL/{FA7AB9EC-10EB-4253-A88C-4860A92731FF}/hyperMILL 2014.1 Documentation Package Chinese Simplified.msi | 103.30 MB |
| hyperMILL/Setup_x64.exe | 1.71 MB |
| MenuLoc/cs/Menu.resources.dll | 12.50 KB |
| MenuLoc/de/Menu.resources.dll | 8.50 KB |
| MenuLoc/en/Menu.resources.dll | 28.00 KB |
| MenuLoc/es/Menu.resources.dll | 13.00 KB |
| MenuLoc/fr/Menu.resources.dll | 12.50 KB |
| MenuLoc/it/Menu.resources.dll | 32.00 KB |
| MenuLoc/ja/Menu.resources.dll | 32.00 KB |
| MenuLoc/ko/Menu.resources.dll | 12.50 KB |
| MenuLoc/nl/Menu.resources.dll | 19.50 KB |
| MenuLoc/pl/Menu.resources.dll | 12.50 KB |
| MenuLoc/ru/Menu.resources.dll | 28.00 KB |
| MenuLoc/sl/Menu.resources.dll | 12.00 KB |
| MenuLoc/zh-CHS/Menu.resources.dll | 11.50 KB |
| MenuLoc/zh-CHT/Menu.resources.dll | 11.50 KB |
| misc/Bildschirm_HG.jpg | 785.78 KB |
| misc/Bildschirm_HG_Laptop.jpg | 756.37 KB |
| misc/Thumbs.db | 21.00 KB |
| Menu.exe | 6.71 MB |
| readme_d.chm | 1.49 MB |
| readme_e.chm | 1.48 MB |
| Installation.chm | 537.56 KB |
| Start.exe | 201.08 KB |
| OPENMIND.ICO | 766 B |
| autorun.inf | 46 B |
| No trackers found |
TorrentBank
Copyright © 2024